I. Brief Introduction
The ZIBOO UT278A+ Clamp Earth Resistance Tester, also known as a loop resistance tester, is designed to measure grounding resistance. This instrument features a modern black luxury screen, displaying resistance and current simultaneously. It includes functions such as data storage, data access, alarm, and automatic shutdown. The device is robust, offering a wide measurement range, high resolution, and strong anti-interference capabilities. Its shockproof, dustproof, and moisture-proof construction makes it suitable for various applications in telecommunications, electricity, meteorology, computer rooms, oil fields, and industrial settings. It is ideal for measuring grounding resistances in diverse environments, including power distribution lines, transmission towers, gas stations, and factory grounding networks.
II. Safety Rules and Precautions
To prevent electric shock or personal injury, please read and strictly observe the following safety rules and precautions before using the instrument.
- The instrument is designed, produced, and inspected according to IEC61010 safety specifications.
- Always pay special attention to safety during operation.
- Avoid using high-frequency signal generators (e.g., mobile phones) near the meter during measurements to prevent errors.
- Familiarize yourself with the text and symbols on the instrument body.
- Before use, ensure the instrument and accessories are in good condition.
- Before powering on, press the trigger once or twice to ensure the jaws are properly closed.
- Do not measure in flammable environments; sparks could cause an explosion.
- Do not hold the trigger or clamp any wires when turning on the meter.
- After power-on, the