1. Introduction
Thank you for choosing the coolo Zigbee Temperature and Humidity Sensor. This device provides real-time monitoring of indoor temperature and humidity, allowing for intelligent linkage with other smart home devices. It is designed to enhance comfort and well-being in your living environment.
This sensor is compatible with various smart home platforms, including Ewelink, Amazon Alexa, Google Home Assistant, SmartThings, and Zigbee2MQTT, requiring a compatible Zigbee hub for operation.
Figure 1: coolo Zigbee Temperature and Humidity Sensor with smart home compatibility.
2. Safety Information
Before using this product, please read this manual carefully and ensure correct usage to prevent damage to the equipment. The manufacturer will not be held responsible for any consequences arising from abnormal operation or misuse.
- This product is intended for general environmental monitoring to assist in maintaining a healthy living environment. It is not designed for precise medical, industrial, or commercial measurement applications.
- Do not attempt to disassemble or modify the device, as this may void the warranty and cause damage.
- Keep the device away from water and high humidity environments to prevent malfunction.
3. Specifications
Figure 2: Product dimensions and key specifications.
| Parameter | Value |
|---|---|
| Product Type | Temperature & Humidity Sensor |
| Wireless Protocol | Zigbee 3.0 (requires Zigbee hub) |
| Working Voltage | DC 3V |
| Battery Type | CR2450 (included) |
| Standby Current | <5uA |
| Working Temperature | -10°C ~ 55°C |
| Working Humidity | 0% ~ 99%RH |
| Temperature Measurement Accuracy | ±1°C |
| Humidity Measurement Accuracy | ±5% |
| Standby Time | ≥6 Months |
| Size | 40mm × 40mm × 13mm |
4. Setup
4.1. Powering On
- Rotate the battery cover anticlockwise to open it.
- Remove the battery insulation film to power on the product.
- Close the battery cover by rotating it clockwise until secure.
4.2. Network Configuration (Pairing)
- Ensure the sensor is powered on.
- Press and hold the RESET button (located on the side of the sensor) for 3 seconds, then release.
- The red LED indicator on the sensor will flash, indicating that the sensor is in network configuration (pairing) mode.
- Open your compatible Zigbee hub's application (e.g., Ewelink, SmartThings, Alexa, Google Home) and follow its instructions to add a new device.
- Once successfully paired, the LED indicator will stop flashing.
4.3. Mounting
- Choose a suitable location for the sensor.
- Use the provided 3M adhesive sticker to affix the product to the desired surface.
- Ensure the sensor is placed in a location where it can accurately monitor temperature and humidity without obstruction.
5. Operation
Once successfully paired with your Zigbee hub, the coolo Temperature and Humidity Sensor will begin monitoring its environment. You can view real-time data and manage the sensor through your smart home application.
- Real-time Monitoring: Access current temperature and humidity readings directly from your smart home app.
- Intelligent Linkage: Connect the sensor to other smart devices (e.g., air conditioners, humidifiers) via your Zigbee hub to create automated routines. For example, automatically turn on a humidifier if humidity drops below a certain level, or adjust the air conditioner based on temperature.
- Exception Reminders: Set up alerts in your app to be notified if temperature or humidity levels exceed or fall below your predefined thresholds.
Figure 3: Real-time monitoring of temperature and humidity.
Figure 4: Example application in a baby room for optimal comfort.
Figure 5: Intelligent linkage with an air conditioner.
Video 1: Product overview and demonstration of the Zigbee Temperature and Humidity Sensor.
6. Maintenance
6.1. Battery Replacement
The sensor uses a CR2450 battery. When the battery level is low, you may receive a notification in your smart home app. To replace the battery:
- Rotate the battery cover anticlockwise to open it.
- Remove the old CR2450 battery.
- Insert a new CR2450 battery, ensuring correct polarity.
- Close the battery cover by rotating it clockwise until secure.
6.2. Cleaning
To clean the sensor, gently wipe its surface with a dry, soft cloth. Do not use liquid cleaners, aerosols, or harsh chemicals, as these may damage the device.
7. Troubleshooting
7.1. Inaccurate Readings
- Obstructions: Ensure there are no physical obstacles directly around the product that could interfere with its sensors.
- Environmental Factors: Avoid placing the sensor near objects that cause rapid temperature changes, such as air conditioners, fans, refrigerators, ovens, or direct sunlight. These can lead to inaccurate readings.
7.2. Connectivity Issues
- Zigbee Hub: Verify that your Zigbee hub is powered on and functioning correctly.
- Distance: Ensure the sensor is within the effective wireless communication range of your Zigbee hub. Thick walls or other building structures can shorten this distance.
- Battery Level: Check the battery status in your smart home app. A low battery can affect connectivity.
- Re-pairing: If connectivity is lost, try re-pairing the sensor with your Zigbee hub by following the steps in Section 4.2.
7.3. General Issues
If you encounter persistent issues not covered here, please refer to the support section of your Zigbee hub's manufacturer or contact coolo customer support.
8. User Tips
- Hub Compatibility: This sensor requires a Zigbee 3.0 compatible hub. While it supports Ewelink, Alexa, Google Home, SmartThings, and Zigbee2MQTT, ensure your specific hub is Zigbee 3.0 compliant for optimal performance.
- Clear Setup: For a smooth setup, follow the step-by-step instructions for powering on and network configuration provided in Section 4. A clear understanding of these steps will prevent common pairing difficulties.
- Strategic Placement: For the most accurate readings, place the sensor in the central area of the room you wish to monitor, away from direct drafts, heat sources, or cold spots.
9. Frequently Asked Questions (FAQ)
- Q: What kind of hub do I need for this sensor?
- A: You need a Zigbee 3.0 compatible hub to connect and operate this sensor.
- Q: Is the battery included with the sensor?
- A: Yes, a CR2450 battery is included with the product.
- Q: Can I use this sensor for medical temperature measurements?
- A: No, this product is designed for general environmental monitoring for comfort and health assistance, not for precise medical or industrial measurement applications.
- Q: Does it work with Ewelink support?
- A: Yes, the sensor is compatible with Ewelink support, as well as Amazon Alexa, Google Home Assistant, SmartThings, and Zigbee2MQTT, provided you have a compatible Zigbee hub.
10. Warranty and Support
For warranty information or technical support, please refer to the documentation provided by your retailer or contact coolo customer service directly. Keep your purchase receipt as proof of purchase.
A PDF version of this user manual is available for download. Please refer to the product page or contact customer support for the link.