1. Important Safety Information
1.1 General Warnings
- This product is intended for use by adults aged 18 and over. Please keep this product out of the reach of children.
- CAUTION! Possible dangerous radiation! DO NOT stare directly into the light beam or shine the light directly into the eyes of anyone!
- The product will generate massive heat during prolonged operation. Please exercise caution during use. It is recommended not to use high brightness levels for extended periods to prevent burns and product damage.
- DO NOT cover or place objects near the head of the product, as this may cause damage to the product or accidents due to high temperatures.
- DO NOT use the product to illuminate flammable or explosive materials, as the high heat may lead to combustion or explosion.
- Please use the product in a standard handheld manner to avoid accidents in the event of product failure.
- When the product is placed in an enclosed or flammable environment such as a pocket or backpack, or when it is left unused for an extended period, please activate Full Lockout Mode to avoid accidental activation and dangers caused by excessive heat.
- DO NOT expose the product to temperatures above 60°C (140°F) for prolonged time, as this poses a risk of battery explosion or combustion.
- Recharge the product every 6 months when left unused for a prolonged time.
- DO NOT disassemble or modify this product as doing so will cause damage to it and render the product warranty invalid.
1.2 Battery Safety
- Improper use of devices with built-in Li-ion batteries may result in severe battery damage or safety hazards such as combustion or explosion.
- DO NOT use the device if it is damaged.
- DO NOT disassemble, puncture, cut, crush, or incinerate the device.
- If any leakage or abnormal odor is noticed, stop using the device immediately.
- Dispose of the device/batteries in accordance with applicable local regulations.
2. Product Overview
The NITECORE EDC25 is an ultra-slim tactical EDC flashlight, designed for everyday carry with high performance and durability.



2.1 Package List
- NITECORE EDC25 Flashlight x1
- USB-C Charging Cable x1
- Lanyard x1
- User Manual x1

3. Features
- Utilizes 2 x UHi 20 LEDs with a max output of 3,000 lumens.
- Uses a precision metal orange peel reflector, perfectly combining long range and wide angle illumination.
- Max peak beam intensity of 22,500cd and max throw of 300 meters.
- 4 brightness levels to cycle through.
- One button customizable access to TURBO or STROBE READY™.
- STROBE Mode uses randomly changing frequencies for stronger dizzying effects.
- Power indicators indicate the remaining battery power.
- Level indicators indicate the current brightness level.
- Built-in 1,700mAh Li-ion battery.
- Advanced Power Cut-Off (APC) technology for an ultra-low standby power consumption (365-day ready experience).
- Highly efficient constant current circuit provides a stable output up to 55 hours.
- Dual tail buttons enable intuitive operations.
- Intelligent Li-ion battery charging circuit with a USB-C charging port.
- Intelligent brightness level memory function.
- 2 lockout modes available (Half Lockout Mode and Full Lockout Mode).
- Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6).
- Constructed of aluminum alloy with HA III military grade hard-anodized finish.
- Waterproof and dustproof rating in accordance with IP54.
- Impact resistant to 1 meter.









4. Specifications
4.1 General Specifications
- Length: 136.3mm (5.37")
- Width: 31.4mm (1.24")
- Height: 21.4mm (0.84")
- Weight: 104g (3.67 oz)
4.2 Performance Data (FL1 Standard)
| Mode | Lumens | Runtime | Beam Distance | Peak Intensity |
|---|---|---|---|---|
| TURBO | 3,000 Lumens | — | 300m | 22,500cd |
| HIGH | 1,000 Lumens | 1h 30min | 180m | 8,100cd |
| MID | 200 Lumens | 4h 15min | 90m | 2,000cd |
| LOW | 65 Lumens | 14h | 50m | 680cd |
| ULTRALOW | 15 Lumens | 55h | 24m | 145cd |
| STROBE | 3,000 Lumens | — | — | — |
Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, using the built-in Li-ion battery (1,700mAh) under laboratory conditions. The data may vary in real-world use due to different environmental conditions.
- Impact Resistance: 1m
- IP Rating: IP54

5. Setup
5.1 Charging Function
The EDC25 is equipped with an intelligent charging system. Please charge the battery before the first use.
- Use the USB-C cable to connect an external power supply (e.g., a USB adapter, a power bank, or other USB charging devices) to the charging port on the flashlight.
- During the charging process, the green power indicators will gradually transition from flashing to a steady light to display the battery level.
- When the battery is fully charged, the EDC25 will cease the charging process, and the power indicators will become steadily turned on to inform the user.
- The lighting function is available during the charging process (TURBO and STROBE excluded).
- The charging time is approximately 1 hour 15 minutes (when charged via a 5V/2A adapter).
Note: The product will be automatically unlocked when charging in the Lockout Mode.

6. Operating Instructions
6.1 On / Off
- On: When the light is off, full press the Power Button until a click sound is heard to turn it on.
- Off: When the light is on, full press the Power Button until a click sound is heard to turn it off.
Note: Each time the light is turned on, the Level Indicators and the Power Indicators will illuminate to indicate the current brightness level and the remaining battery power. They will automatically turn off after 5 seconds. Half press the Power Button to reactivate them.
6.2 Brightness Levels
- When the light is on, half press the Power Button to cycle through the following brightness levels: ULTRALOW-LOW-MID-HIGH.
- The flashlight will directly access the previously memorized brightness level when reactivated.
Note: When the indicators turn off, half press the Power Button once to turn on the indicators. Half press the Power Button again to adjust the brightness level.
6.3 ULTRALOW Activation
- When the light is off, half press and hold the Power Button to access ULTRALOW. Release to turn it off.
6.4 Customizable Function (TURBO/STROBE)
- When the light is on/off, press and hold the Customizable Button to access TURBO/STROBE. The Level Indicators will turn off one by one, indicating the remaining time for TURBO/STROBE. Release to return to the previous status.
- To alternate between TURBO and STROBE: Press and hold the Customizable Button without releasing it, then full press the Power Button each time to alternate and select between TURBO and STROBE. After selecting your preference, the flashlight will enable quick access to TURBO / STROBE.
Note: When TURBO / STROBE is activated, the flashlight will automatically adjust the brightness to prevent overheating and prolong the lifespan of the flashlight. To restore the previous brightness, simply reactivate TURBO / STROBE.

6.5 Lockout / Unlock
The EDC25 has two lockout modes: Half Lockout Mode and Full Lockout Mode.
- Half Lockout Mode: When the light is on, half/full press and hold the Power Button until the red Lockout Indicator flashes once to access Half Lockout Mode. In this mode, the Power Button is unavailable to activate the flashlight, and the red Lockout Indicator will flash once to indicate this status when pressing the Power Button. Pressing and holding the Customizable Button will still access TURBO/STROBE; release to turn it off.
- Full Lockout Mode (Default Setting): When the light is on, half/full press and hold the Power Button until the red Lockout Indicator flashes once followed by 2 flashes to access Full Lockout Mode. In this mode, both buttons are unavailable to activate the flashlight, and the red Lockout Indicator will flash twice to indicate this status when pressing either button.
- Unlock: In any lockout mode, short press and then long press the Power Button until all level indicators light up one by one to exit Lockout Mode. The flashlight will access ULTRALOW to indicate this.
7. Maintenance
- Regular maintenance (cleaning) should be performed by the user or specialized service points at the user's expense.
- If no specific maintenance information is provided, assess the physical condition of the product at least once a week.
- If any deviation from the new product's physical condition is detected, urgent maintenance (cleaning) or service steps should be taken.
- Lack of proper maintenance (cleaning) and timely reaction to detected deviations can lead to permanent damage to the product.
- The manufacturer is not responsible for damages resulting from neglect of maintenance.
- Keep the front lens clean to ensure the built-in sensor functions properly.
8. Troubleshooting
8.1 Power Indication
When the light is on/off, half press the Power Button and the Power Indicators will be on to indicate the remaining battery power (lockout modes excluded).
| Status of Indicators | Power Level |
|---|---|
| 4 Constant-on | 75%-100% |
| 3 Constant-on | 50%-75% |
| 2 Constant-on | 25%-50% |
| 1 Constant-on | 0%-25% (Please charge the product as soon as possible) |
Note: The battery should be recharged when the output appears to be dim or the flashlight becomes unresponsive due to low power.
8.2 Sensor Protection Function (ATR)
The integrated ATR technology regulates the output of the EDC25 according to the working condition and ambient environment to maintain optimal performance.
- When there is an obstruction near the light outlet, and the flashlight accidentally accesses HIGH, TURBO, or STROBE, the flashlight brightness will automatically decrease to 500 lumens to prevent overheating and prolong the lifespan of the flashlight.
- The sensitivity of the sensor may differ due to variations in the color and material of obstructions.
- Once the obstruction is removed, the flashlight will return to its previous brightness level and turn off the protection function.
Note: When HIGH, TURBO, or STROBE is on, covering the light outlet will not activate the sensor protection function, and the brightness remains unchanged.
9. User Tips
- The built-in battery is 1700mAh. Ensure it's fully charged for maximum runtime.
- Utilize the customizable tactical button to quickly switch between STROBE and TURBO modes for emergencies or specific needs.
- Remember to activate Full Lockout Mode when storing the flashlight in a bag or pocket to prevent accidental activation and potential overheating.
10. Frequently Asked Questions (FAQ)
Q: What is the battery size?
A: The NITECORE EDC25 has a built-in 1700mAh Li-ion battery.
Q: How long is the warranty?
A: All NITECORE products are warranted for quality. Any DOA/defective product can be exchanged within 15 days of purchase. After that, all defective/malfunctioning NITECORE products can be repaired free of charge within 24 months from the date of purchase. Beyond 24 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
11. Warranty and Support
11.1 Warranty Details
- Any DOA/defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase.
- After 15 days, all defective/malfunctioning NITECORE products can be repaired free of charge within 24 months from the date of purchase.
- Beyond 24 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
11.2 Warranty Exclusions
The warranty will be nullified if:
- The product(s) is/are broken down, reconstructed, and/or modified by unauthorized parties.
- The product(s) is/are damaged due to improper use.
11.3 Contact and Support
For the latest information on NITECORE products and services, please contact a local NITECORE distributor or send an email to service@nitecore.com.
All images, texts, and statements specified herein this user manual are for reference purposes only. Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.
12. Environmental Protection
The crossed-out waste bin symbol indicates that electronic equipment, according to the European Union directive, must not be disposed of with unsorted municipal waste. It is subject to selective collection and recycling at designated points. By ensuring its correct disposal, you prevent potential negative consequences for the natural environment and human health. The collection system for used equipment complies with locally applicable environmental regulations regarding waste disposal. Detailed information on this topic can be obtained from the municipal office, waste disposal company, or the store where the product was purchased.