1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new RACBOX Rearview LED Turn Signal Light. Please read this manual thoroughly before installation and use to ensure proper function and safety.
This product is an auxiliary accessory for automotive lighting, designed for the normal replacement and upgrade of original car lights. It is not intended for illegal modification or use. The product meets relevant national automotive lighting industry standards and has undergone quality testing.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
3. Product Overview
Specifications
| Feature | Detail |
|---|---|
| Product Name | Side Mirror Turn Signal Blinker |
| Item Type | Side Mirror Signal Blinker |
| Model Name | Rearview Mirror Side Turn Signal Light |
| OEM Numbers | 87614-1W000 (Left), 87624-1W000 (Right) |
| Light Color | Amber |
| Case Color | Clear Lens |
| Material | ABS & LED Chips |
| Voltage | 12 V |
| Condition | 100% Brand New (Aftermarket Replacement) |
Dimensions
Compatibility
- Only fit for KIA Rio 2012-2017 European Version.
- Not fit for KIA Rio Russian version.
Package Contents
The package includes 1pc or 2pcs LED Turn Signal Light, depending on your order.
4. Setup & Installation
Before beginning installation, ensure you have the correct tools and understand the steps. Professional installation is recommended if you are unsure.
- Turn off the vehicle engine and disconnect the power to prevent short circuit.
- Carefully remove the cover or lens of the original mirror light.
- Take out the old bulb or light assembly from the mirror housing.
- Disconnect the power plug of the original mirror light.
- Install the new mirror light into the mirror housing correctly.
- Connect the power plug properly. If the light does not work, reverse the plug polarity.
- Fix the light firmly and reinstall the mirror cover or lens.
- Test the turn signal function and light brightness to ensure normal operation.
- Check all connections to make sure they are stable and reliable.
5. Operating Instructions
Once installed, the LED turn signal lights operate automatically with your vehicle's existing turn signal system. When the turn signal is activated, the amber LEDs will flash to indicate your intended direction.
6. Maintenance
These LED turn signal lights are designed for long-lasting performance with minimal maintenance. Periodically check the lights for any signs of damage or dimming. Clean the clear lens with a soft, damp cloth as needed to maintain optimal light output.
7. Troubleshooting
- Light does not work after installation: Ensure the power plug is connected properly. If it still doesn't work, try reversing the plug polarity.
- Dim or inconsistent light: Check all connections for stability. Ensure there is no moisture or damage to the unit.
- Compatibility issues: This product is specifically designed for the European Version of KIA Rio 2012-2017. It is not compatible with the Russian version. Verify your vehicle's model and region before installation.
8. User Tips
- Some users have found that removing a small amount of rubber on the tip of the light can help achieve a perfect fit during installation.
- Upon receiving your order, verify that all expected components (e.g., both left and right lights if ordered as a pair) are included and in good condition.
9. Warranty & Support
For any issues or questions regarding your product, please contact the seller or manufacturer for support. Keep your purchase records for warranty claims.
10. Compliance Information
Manufacturer & EU Authorized Representative
- Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou, tdlaccount@126.com
- EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND, info@apex-ce.com
This product is designed to meet relevant national automotive lighting industry standards.
A user manual in PDF format may be available for download. Please refer to the product page or contact support for access.