1. Introduction
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your new Dynamic LED Side Marker lights. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Figure 1: Dynamic LED Side Marker lights on a MINI Cooper R60.
2. Safety & Warnings
Important Safety Information
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- This product must comply with all applicable safety and regulatory requirements in the market where it is sold.
3. Product Overview and Specifications
The Dynamic LED Side Marker lights are designed to provide enhanced visibility and a modern aesthetic for your MINI Cooper. They feature a sequential amber light effect for turn signals.
Key Features:
- Dynamic (flowing) amber turn signal light.
- Available in Glossy Smoked Black or Crystal (clear) lens.
- Direct replacement for OEM side marker lights.
- DOT SAE certified.
Specifications:
| Attribute | Value |
|---|---|
| Item Type | Turn Signal |
| For Vehicle Brands/Model | BMW (MINI Cooper) |
| Fitment 1 | For MINI Cooper R60 COUNTRYMAN (2010 - 2017) |
| Fitment 2 | For MINI Cooper R61 PACEMAN (2010 - 2017) |
| Voltage | 12 V |
| Interface Type | T10 (W5W/194) |
| Lumens | 2400LM |
| Item Weight | 0.19kg (per pair) |
| Model Name (OEM Cross-reference) | 63139802570/63139802569, 63132221503, 9802570, 9802569 |
| Wattage | LED Dynamic Turn Signal Side Mirror Blinker Light |
| Origin | Mainland China |
| Certifications | DOT SAE |
| Quantity | One Pair (right and left) |
| Lens Color Options | Glossy Smoked Black / Crystal |
| Light Color | Yellow/Amber light |

Figure 2: OEM cross-reference and compatible models.

Figure 3: Product dimensions.
Dynamic Light Effect Demonstration:
Video 1: Demonstration of the dynamic sequential amber light effect for both clear and smoked lens versions.
4. Installation (Setup)
The Dynamic LED Side Marker lights are designed for easy installation as a direct replacement for your vehicle's original side markers.
Installation Steps:
- Prepare the Vehicle: Ensure the vehicle is turned off and cool. It is recommended to disconnect the car battery's negative terminal before starting any electrical work.
- Locate Original Side Markers: Identify the original side marker lights on your MINI Cooper's fenders.
- Remove Original Parts: Carefully remove the original car parts (side markers) to access the internal screws/clips. This typically involves prying them out gently with a plastic trim removal tool to avoid scratching the paint.
- Disconnect Wiring: Once the original side marker is loose, disconnect the electrical connector.
- Install New LED Side Marker: Connect the wiring of the new Dynamic LED Side Marker to the vehicle's harness. Ensure a secure connection.
- Secure the New Unit: Insert the new LED side marker into the fender opening, ensuring the clips align and snap into place for a tight fit.
- Test Functionality: Reconnect the car battery (if disconnected) and test the turn signals to ensure the new LED side markers are functioning correctly.

Figure 4: Location of the side marker light on the vehicle fender.

Figure 5: Original side marker removed, showing mounting clips.

Figure 6: Wiring connector for the side marker light.
Note: Some users have reported that the connector may not be perfectly compatible or that the fit might be slightly loose. Modifications to the connector or securing the unit more firmly may be required in such cases. Always ensure a secure and proper electrical connection.

Figure 7: Rear view of the LED side marker, showing clips and wiring.
5. Operation
The Dynamic LED Side Marker lights operate automatically in conjunction with your vehicle's turn signal system. When the turn signal is activated, the LEDs will illuminate in a sequential, flowing amber pattern, indicating your intended direction to other drivers.
- Turn Signal Activation: Activate your vehicle's turn signal lever as you normally would.
- Dynamic Illumination: The LED side markers will light up sequentially from front to back in an amber color, providing a clear and modern indication.
- Hazard Lights: When hazard lights are activated, both left and right side markers will flash dynamically.
6. Maintenance
These LED side markers are designed to be low-maintenance. Follow these guidelines to ensure their longevity and optimal performance:
- Cleaning: Clean the lens with a soft, damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals that could damage the lens material.
- Inspection: Periodically inspect the lights for any signs of damage, cracks, or loose connections. Ensure they are securely seated in the fender.
- Electrical Connections: If you experience intermittent operation, check the electrical connections to ensure they are clean, tight, and free from corrosion.
- Avoid High-Pressure Washing: While the units are designed to be weather-resistant, avoid directing high-pressure water jets directly at the lights for extended periods, as this could potentially compromise seals.
7. Troubleshooting
If you encounter issues with your Dynamic LED Side Marker lights, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not illuminate | Loose or incorrect wiring connection. Faulty unit. | Check all electrical connections. Ensure correct polarity. If still not working, test with a multimeter or contact support. |
| Lights flicker or operate intermittently | Loose connection. Corrosion on terminals. | Secure all connections. Clean terminals if corrosion is present. |
| "Faulty light bulb" error on dashboard | Vehicle's CAN bus system detects lower power draw from LEDs. | This may occur on some vehicles. A CAN bus error canceller/resistor might be needed (not included). Consult a professional auto electrician. |
| Unit is loose or rattles after installation | Imperfect fitment or clips not fully engaged. | Ensure all clips are fully engaged. If necessary, apply a small amount of automotive-grade adhesive or foam tape to secure the unit and prevent rattling. |
| Connector is not compatible with vehicle wiring | Variations in vehicle wiring harnesses. | Some modifications to the wiring may be necessary. This could involve splicing wires or using adapter harnesses. It is recommended to seek professional installation if uncomfortable with wiring modifications. |
8. User Tips
Based on feedback from other users, here are some helpful tips:
- Connector Compatibility: While generally plug-and-play, some users have found that the connector may require minor modifications to be fully compatible with their vehicle's wiring harness. If you encounter this, careful modification or professional assistance may be needed.
- Secure Fitment: Ensure the units are seated tightly. If they feel loose, consider adding a thin strip of automotive-grade foam tape around the edges before snapping them into place to prevent rattling and ensure a snug fit.
- Installation Ease: Many users report the installation process is straightforward and quick, often described as a "breeze."
- Product Quantity: The product is sold as a pair, suitable for both the left and right sides of your vehicle.
9. Warranty & Support
For any product-related inquiries or support, please contact the manufacturer directly. A user manual in PDF format is also available for download, which may contain additional detailed information.
Manufacturer Information:
- Company Name: Guangzhou yangchi auto parts co.LTD
- Address: CN-2 # 1003 min jie ke chuang, minying ke ji yuan, tai he zhen, baiyun district, Guangzhou
- E-Mail: ouyan99@dingtalk.com
- Telephone: 86-18102513142
EU Authorized Representative:
Please note that the EU Authorized Representative acts solely for cross-border sellers and is not involved in the manufacture, import, or sale of the product. They are not responsible for after-sales services related to the product. In case of any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.
- Company Name: CET PRODUCT SERVICE LTD
- Address: Osterholzallee 144, 71636 Ludwigsburg Germany
- E-Mail: info.cetservice@gmail.com
- Telephone: +4971416432236