Important Safety Information
The laser engraving machine must be used only in a horizontal position and firmly fixed to prevent fire hazards when accidentally moved during work or falling from the workbench. Do not point the laser at people and animals. Always wear protective glasses when operating the laser engraver. Please use this device correctly. We are not responsible for any damage or destruction caused by improper use.
Product Overview
The ELIDOR Z6 Laser Engraver is a versatile tool designed for precise engraving and cutting on various materials. It features a 32-bit MCU motherboard, an ultrafine laser point of 0.01mm, and a working area of 300x300mm. Available in 6W and 12W laser power options, it offers high precision and efficiency for creative projects.
Unboxing and Package Contents
Upon receiving your ELIDOR Z6 Laser Engraver, carefully unbox all components and verify that all items are present according to the packing list.
Package Contents:
- Short Profile (x2)
- Long Profile (x2)
- Cantilever (x1)
- Motherboard box (x1)
- Quick Assembly Guide Instruction Manual (x1)
- Goggles (x1)
- 2mm/4mm measuring block (x1)
- Legs (x4)
- USB Cable (x1)
- Kraft Paper (x1)
- Basswood (x1)
- Aluminum sheet (x2)
Setup and Assembly
The ELIDOR Z6 Laser Engraver requires DIY assembly. Refer to the included "Quick Assembly Guide Instruction Manual" for detailed step-by-step instructions. Ensure all components are securely fastened before operation.
Key Assembly Points:
- Assemble the frame using the short and long profiles.
- Attach the cantilever and laser module.
- Connect the motherboard box and USB cable.
- Ensure the machine is placed on a stable, horizontal surface.
Operating Instructions
Software Compatibility:
The ELIDOR Z6 Laser Engraver supports a wide range of operating systems and software.
- Operating Systems: macOS, Windows, Linux
- Supported Software: LightBurn, LaserGRBL
- File Formats: NC, DXF, BMP, JPG, PNG, etc.
Adjusting Laser Height and Focus:
The laser module's height can be rotated and adjusted to achieve optimal focus for different material thicknesses. The Z6 features 0.01mm high-precision carving. Use the included 2mm/4mm measuring block to assist with focusing.
Engraving and Cutting Parameters:
The ELIDOR Z6 utilizes new compressed spot technology for finer details. The 6W model has a focus spot of 0.04*0.14mm, significantly smaller than typical laser engravers (0.25*0.35mm). Refer to the tables below for recommended parameters for various materials.
6W Output Laser Common Materials and Recommended Engraving Parameters:
Maximum Cutting Depth and One-Pass Cut Depth:
Applicable Materials:
The ELIDOR Z6 can engrave and cut a wide variety of materials, including:
- Wood
- Bamboo
- Paper
- Plastic
- Leather
- PCB board
- Aluminum oxide
- Non-reflective coating
- Lacquered metal
- Ceramic
Maintenance
Laser Module Cooling:
The integrated cooling exhaust fan is crucial for maintaining the laser head's lifespan, which is rated for ≥10000 hours. Regularly check the fan for dust buildup and ensure it operates freely to prevent overheating.
General Cleaning:
Keep the engraving area and machine components clean from debris and dust. Use a soft, dry cloth for cleaning. Avoid using abrasive cleaners or solvents that could damage the machine.
Troubleshooting
Machine Stops Unexpectedly:
The ELIDOR Z6 features a tilt protection function. If the device tilts during operation, this safety feature will automatically stop the machine from working. Ensure the machine is on a stable, level surface.
Poor Engraving/Cutting Quality:
- Check laser focus: Ensure the laser module height is correctly adjusted for the material.
- Verify material parameters: Adjust power and speed settings according to the material type and desired outcome (refer to the parameter tables).
- Clean laser lens: A dirty lens can reduce laser power and precision.
Connection Issues:
- Ensure the USB cable is securely connected to both the engraver and your computer.
- Verify that the correct drivers are installed for your operating system.
- Try a different USB port or cable.
Specifications
| Feature | Detail |
|---|---|
| Model Number | ELIDOR Z6 |
| Engraving Area | 300x300 mm |
| Product Dimension | 442x425x151mm |
| Package Dimension | 485x218x125mm |
| Input Voltage | 100-240V AC |
| Frequency | AC50/60Hz |
| Power Spec | 6W/12W (Spot compression) |
| Ultrafine Laser Point | 0.01mm |
| Motherboard | 32-bit MCU |
| Controller | CNC USB |
| Data Transmission | USB interface, Offline Engraving |
| Operating Systems | macOS, Windows, Linux |
| Supported Software | LightBurn, LaserGRBL |
| Certification | CE |
| Is Smart Device | No |
User Tips
- Always perform small test engravings on scrap material to fine-tune settings before working on your final project.
- For intricate designs, consider using lower speeds and multiple passes for cleaner cuts and engravings.
- Ensure proper ventilation in your workspace when operating the laser engraver, as some materials can produce fumes.
- Keep the laser lens clean to maintain optimal performance and extend its lifespan.
Warranty and Support
The ELIDOR Z6 Laser Engraver comes with a 1-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly.
Certifications:
The product is certified by US & EU Authorities, ensuring quality and safety standards. It holds CE certification.
