Introduction
The NEEWER PA069 Phone Cooler Fan is designed to provide efficient and rapid cooling for your smartphone, preventing overheating during intensive tasks such as mobile gaming, 4K video recording, and live streaming. Featuring advanced semiconductor cooling technology, magnetic attachment, vibrant RGB lighting, and smart temperature control, this device ensures optimal phone performance and extends battery life. Its silent operation allows for an immersive user experience without distracting noise.
Overview of the NEEWER PA069 Phone Cooler Fan.
Product Contents
Please check the package contents to ensure all items are present:
- Mobile Phone Cooler x 1
- Magnetic Sheet x 1 (for non-MagSafe devices)
- Quick-Release Back Clip x 1
- Power cord x 1 (Type-C)
Contents included in the NEEWER PA069 package.
Setup Guide
Attaching the Cooler
- For iPhone 12 and newer (MagSafe compatible): Simply align the NEEWER PA069 cooler with the MagSafe area on the back of your iPhone. The strong magnetic attraction will securely attach the cooler.
- For other non-magnetic devices (Android phones, older iPhones):
- Peel off the protective film from the adhesive magnetic sheet.
- Carefully attach the magnetic sheet to the center of the back of your phone or phone case. Ensure it is clean and dry for optimal adhesion.
- Once the magnetic sheet is applied, you can magnetically attach the NEEWER PA069 cooler to it.
- For added security, especially during active use, install the quick-release back clip onto the radiator and then attach it to your phone. This provides a firm grip and prevents accidental detachment.
Magnetic attachment method for the phone cooler.
Magnetic attraction design for secure and comfortable use.
Quick-release back clip for enhanced stability.
Power Connection
Connect the provided Type-C power cord to the cooler's Type-C interface and plug the other end into a suitable USB power source (e.g., wall adapter, power bank, computer USB port).
Type-C interface for power supply.
Operating Instructions
The NEEWER PA069 features two operating modes and adjustable RGB lighting.
Control buttons for mode and lighting.
Power On/Off and Mode Switching
- Power On/Off: Long press the power button (usually indicated by a circle with a vertical line) to turn the cooler on or off.
- Switch Mode (Short Press): A short press of the mode button (often labeled 'AI' or similar) will cycle between High Speed Mode (HI) and Intelligent Mode (AI). The digital display will show the current mode.
- High Speed Mode (HI): Provides rapid cooling, quickly reducing the phone's surface temperature within 30 seconds. Ideal for intense gaming or high-performance activities.
- Intelligent Mode (AI): The fan speed automatically adjusts to the environment, balancing cooling efficiency with minimal noise and protecting the phone's battery.
Two speed settings for optimal cooling.
Detailed descriptions of High-speed and Smart modes.
RGB Lighting Effects
- Lighting Mode (Short Press): A short press of the lighting button (often indicated by a light icon) will cycle through seven-color cycle, monochrome cycle, or turn off the lights. This function is typically operable only in High Speed Mode (HI).
Vibrant RGB lighting effects.
Maintenance
To ensure the longevity and optimal performance of your NEEWER PA069 Phone Cooler Fan, follow these simple maintenance guidelines:
- Cleaning: Regularly wipe the exterior of the cooler with a soft, dry cloth to remove dust and fingerprints. Avoid using abrasive cleaners or solvents.
- Fan Vents: Ensure the fan vents are free from obstructions (dust, lint, etc.) to maintain efficient airflow. You can use a soft brush or compressed air to gently clean the vents if necessary.
- Magnetic Surface/Thermal Pad: Keep the magnetic contact surface and the thermal pad clean. If using the adhesive magnetic ring, ensure it remains securely attached and free from debris.
- Storage: When not in use, store the cooler in a cool, dry place away from direct sunlight and extreme temperatures.
Non-slip silicone mat for phone protection.
Troubleshooting
If you encounter any issues with your NEEWER PA069 Phone Cooler Fan, please refer to the following common troubleshooting steps:
- Cooler not turning on:
- Ensure the Type-C power cable is securely connected to both the cooler and a working power source.
- Verify that the power source (e.g., wall adapter) is functioning correctly.
- Try using a different Type-C cable or power adapter.
- Cooling effect is weak:
- Check if the cooler is properly attached to the phone's back, ensuring good contact with the thermal pad.
- Make sure the fan vents are not blocked by hands, phone cases, or debris.
- Ensure the cooler is operating in High Speed Mode (HI) for maximum cooling performance.
- Fan is noisy:
- While designed for ultra-low noise, ensure no foreign objects are obstructing the fan blades.
- If the noise is excessive, switch to Intelligent Mode (AI) for quieter operation, as it adjusts fan speed based on temperature.
- RGB lights not working:
- Ensure the cooler is powered on.
- Press the lighting mode button to cycle through the lighting options. Note that RGB lighting may only be active in High Speed Mode (HI).
If the problem persists after trying these steps, please contact customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model | PA069 |
| Dimensions | 62 × 62 × 25mm |
| Weight | 82g (with magnets) |
| Material | ABS, Metal, Magnet |
| Cooling Technology | Advanced Semiconductor Cooling |
| Fan Type | Seven blade hydraulic bearing fan |
| Noise Output | Ultra low noise |
| Cooling Modes | High Speed (HI), Intelligent (AI) |
| Cooling Effect | 8-12℃ reduction (Lab tested), 40×40mm coverage |
| Lighting | Vibrant RGB Lighting Effects |
| Interface | Type-C |
| Compatibility | iPhone 12+ (MagSafe), Android (with magnetic ring) |
*All data is tested by Newell Laboratory under specific conditions and may have slight errors due to actual usage.
Detailed product parameters.
Product parameters and features.
Heat dissipation performance test results.
User Tips
- Optimal Cooling: For the most effective cooling, ensure the cooler is directly attached to the phone's back, avoiding thick cases that might impede heat transfer.
- Gaming Performance: Activate High Speed Mode (HI) during intense gaming sessions to maintain peak phone performance and prevent thermal throttling.
- Battery Health: Use Intelligent Mode (AI) for general use or lighter tasks to balance cooling with battery protection, as it gradually cools to safeguard your device.
- Magnetic Ring Placement: When using the magnetic ring for non-MagSafe phones, ensure it is centered on the phone's back for the best magnetic grip and cooling coverage.
- Cable Management: Keep the Type-C power cable tidy to avoid accidental disconnections or interference during use.
Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller or NEEWER customer service directly. Keep your purchase receipt as proof of purchase.