1. Product Overview
The NEWBOLER Adjustable Aluminum Alloy Bicycle Luggage Carrier is designed to provide a robust and lightweight solution for transporting goods on your bicycle. Made from durable aluminum alloy, it is corrosion-resistant and built for stability across various terrains.
Key Features
- Durable Material: Constructed from high-quality aluminum alloy, ensuring it is lightweight, corrosion-resistant, and not prone to rust, unlike iron materials.
- Strong Load Capacity: Capable of bearing over 30 kilograms (66 lbs) of weight, suitable for various travel needs.
- Adjustable Design: The bracket is adjustable to fit a wide range of bicycle sizes, covering approximately 85% of vehicle models (120-157mm).
- Wide Compatibility: Suitable for mountain bikes, road bikes, electric assisted bicycles, and other types of bikes.
- Non-Perforated Installation: Features a 4-point fixed installation system that requires no drilling or welding, simplifying the setup process.
- Stable & Quiet Ride: Designed for stable installation that prevents shaking, swaying, or noise during riding, protecting your luggage and bike.
- Paint Protection: Equipped with silicone gaskets at the bottom of the bracket to prevent scratching the bicycle's paint.
- Versatile Bag Attachment: Can be equipped with multiple types of bicycle bags, including tail bags, front fork bags, and large-capacity panniers.
2. Package Contents
Please check the package carefully to ensure all components are present and undamaged.
- Bicycle Rear Rack x 1
- Fixed Straps x 4
- Nut Wrench x 1
- Screw Wrench (Allen Key) x 1
3. Specifications
| Attribute | Value |
|---|---|
| Product Name | Bicycle Rear Rack |
| Product Weight | 625.5g |
| Product Material | Aluminum alloy |
| Load Bearing Capacity | Over 30KG |
| Applicable Bicycle Types | Mountain bikes, road bikes, electric assisted bicycles, etc. |
| Color | Black |
| Size (Approximate) | 35.5 * 15.5 * 9 * 7.5 cm (13.98 * 6.1 * 3.54 * 2.95 inches) |
Note: The width of the bracket can be adjusted. Installation is possible as long as your bicycle does not have a rear seat frame.
4. Safety Information
- Always ensure all screws and straps are securely tightened before riding.
- Do not exceed the maximum load capacity of 30KG to prevent damage to the carrier or your bicycle.
- Regularly check the carrier for any signs of wear, damage, or loose components.
- Distribute weight evenly on the carrier to maintain bicycle balance and stability.
- Be aware that adding weight to your bicycle can affect its handling and braking performance.
5. Installation Guide
Follow these steps carefully to install your NEWBOLER Bicycle Luggage Carrier. A visual guide is also available in the video below.
Step-by-Step Installation:
- Align the Bracket: Align the bracket with the lower fork position at the rear of the vehicle and ensure proper spacing.
- Adjust if Necessary: If the bracket does not align with the position of the rear fork, you can adjust it by gently bending it by hand and pressing it until it fits.
- Attach First Fixing Strap: First, attach a fixing strap to one side of the bracket and then tighten the screws to secure it. Note: Do not fix two straps on the same side simultaneously at this stage.
- Loosen Middle Screws (Optional): To facilitate the tightening of the fixing strap screws, you can first loosen the middle screws on the bracket.
- Adjust the Bracket: Make any final adjustments to the bracket's position.
- Tighten First Fixing Strap: Securely tighten the screws of the first fixing strap.
- Attach Second Fixing Strap: Place the fixing strap on the other side and fix it with screws. Note: First fix one fixing tape on each side, do not fix two on the same side.
- Tighten Second Fixing Strap: On the other side, follow the same steps and tighten the screws of the fixing band.
- Tighten All Four-Sided Fixing Straps: Ensure all four fixing straps are securely tightened.
- Adjust Rear Seat Lever: Adjust the rear seat lever back to the required position if applicable.
- Final Tightening: The installation is complete once the middle screws are fixed and not shaking.
- Verify Installation: Check the overall stability and ensure the car package (if attached) is securely mounted.
6. Operating Instructions
Once installed, the NEWBOLER Bicycle Luggage Carrier is ready to support your bikepacking and travel needs.
- Attaching Bags: The carrier is designed to work with various bicycle bags, including tail bags, front fork bags, and large-capacity panniers. Use the integrated attachment points and your bag's straps to secure them firmly.
- Weight Distribution: For optimal stability and handling, distribute the weight of your luggage as evenly as possible across the carrier.
- Pre-Ride Check: Before each ride, especially with a loaded carrier, perform a quick check to ensure all bags are securely attached and the carrier itself is firmly mounted to the bicycle.
7. Maintenance
To ensure the longevity and optimal performance of your bicycle luggage carrier, follow these simple maintenance guidelines:
- Cleaning: Wipe down the carrier with a damp cloth after use, especially after riding in wet or muddy conditions. Avoid harsh chemicals that could damage the aluminum alloy finish.
- Inspection: Periodically inspect all screws, bolts, and straps for tightness. Tighten any loose fasteners. Check the aluminum frame for any cracks, bends, or signs of fatigue.
- Silicone Gaskets: Ensure the silicone gaskets remain in place and are not worn out to continue protecting your bike's paint. Replace if necessary.
- Storage: When not in use, store the carrier in a dry place to prevent any potential corrosion, although the aluminum alloy is highly resistant.
8. Troubleshooting
- Carrier feels unstable: Double-check all four fixing straps and the middle screws to ensure they are tightened securely. Ensure the bracket is properly aligned with the bicycle's rear fork.
- Bags are rubbing against the wheel: Re-adjust the bracket and ensure it is positioned correctly to provide adequate clearance between the bags and the wheel/spokes. Ensure bags are securely fastened and not sagging.
- Difficulty in installation: Refer to the detailed step-by-step guide and the installation video. Ensure the bracket is adjusted to the correct width for your bicycle's rear fork. Loosening the middle screws first can help with strap tightening.
- Scratches on bike frame: Verify that the silicone gaskets are correctly positioned at the contact points between the carrier and the bike frame. If missing or damaged, replace them.
9. User Tips
- This carrier is highly recommended for bikepacking trips due to its sturdy construction and ease of installation.
- It fits road bike frames very well, providing a good overall experience.
- The installation process is straightforward and the carrier feels sturdy once mounted.
- The ingenious design makes it a high-quality and easy-to-use system.
- Can be used as a reliable support for various types of bags, including Deuter bags.
10. Frequently Asked Questions (FAQ)
- Q: Is it suitable for a dual suspension bicycle?
- A: The product description indicates compatibility with most bicycle frames, including mountain bikes, road bikes, and electric assisted bicycles. However, specific compatibility with dual suspension systems may vary depending on the frame design. Please check the clearance and attachment points on your specific dual suspension bike before purchase.
- Q: How is the aluminum alloy attached to the rear fork of the bike? Will Velcro straps be enough to hold the alloy during a long ride on uneven paths?
- A: The carrier uses a 4-point fixed, non-perforated installation system with fixed straps and screws, as detailed in the installation guide. These straps are designed to securely hold the carrier. The product description emphasizes 'stable installation riding without shaking' and 'no sway or noise while riding,' suggesting it is robust enough for uneven paths when properly installed and tightened.