Malcayang 6Q0959858

Contents

User Manual: Electric Window Master Control Switch

Model: 6Q0959858 / 6Q0959858A

Brand: Malcayang

1. Product Overview

This manual provides instructions for the installation, operation, and maintenance of your Malcayang Electric Window Master Control Switch. This switch is designed for specific Volkswagen and Seat models to control the electric windows.

Front view of the dual window control switch

Figure 1: Front view of the dual window control switch

The switch is available with different base colors (brown or black) for the connector, as shown in the figures below.

Rear view of the switch showing the brown connector base

Figure 2: Rear view with brown connector base

Rear view of the switch showing the black connector base

Figure 3: Rear view with black connector base

2. Safety & Warnings

Important Safety Information:

  • Read all instructions thoroughly before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Always disconnect the negative battery terminal before working on the switch to prevent short circuits.

3. Installation (Replacing a Faulty Window Switch)

Follow these steps to replace your window control switch:

  1. Preparation: Disconnect the negative battery terminal of your vehicle to prevent short circuits. Carefully unclip any surrounding handles or trim using a screwdriver.
  2. Accessing the Housing: If you prefer not to remove the entire door casing or door handle, gently slide a flat-head screwdriver under the switch bezel and pry it until it loosens to access the housing.
  3. Disconnecting the Old Switch: Once the faulty switch pops out of the bezel, disconnect it from the wire harness and detach it from its outlet.
  4. Preparing the New Switch: Remove the rocker buttons from the old switch (if applicable) before inserting them into the new switch's harness holes.
  5. Final Assembly: Assemble the rockers into the new switch and carefully snap the device into the bezel until it is securely in place. Reconnect the negative battery terminal.

4. Operating Instructions

The window control switch operates intuitively:

  • To lower a window: Press down on the corresponding button.
  • To raise a window: Pull up on the corresponding button.

Ensure the vehicle's ignition is on for the electric windows to function.

5. Maintenance

To ensure the longevity and proper function of your window control switch:

  • Keep the switch clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Avoid spilling liquids on the switch.
  • Do not use harsh chemicals or abrasive cleaners, as these can damage the plastic and electronic components.

6. Troubleshooting

If you experience issues with your window control switch, consider the following:

  • Window not responding: Check the vehicle's fuse box for any blown fuses related to the power windows. Ensure all connections to the switch are secure.
  • Intermittent operation: This could indicate a loose connection or a faulty switch. Re-check the wiring harness connection.
  • Physical damage: If the switch is visibly damaged, it should be replaced immediately to prevent further issues or safety hazards.

7. Specifications

Feature Detail
Brand Name Malcayang
Item Type Window Control Switch
Special Features Power Window Control Switch Button
Model Name Electric Window Double Switch Button
OEM NO. 6Q0959858, 6Q0959858A
Material ABS
External Testing Certification CCC
Origin Mainland China
Fitment 1 For VW Polo 9N (2001-2009)
Fitment 2 For Seat Ibiza/Cordoba (2002-2009)
Item Weight 0.07 kg
Item Dimensions (L x W x H) 5cm x 5cm x 4cm (approx.)
Dimensions diagram of the switch showing 4cm height, 3.6cm/1.4in depth, 3.2cm/1.3in width

Figure 4: Approximate dimensions of the switch

8. User Tips

  • Verify Compatibility: Before purchasing or installing, always double-check the OEM part number (6Q0959858 or 6Q0959858A) and vehicle fitment (VW Polo 9N, Seat Ibiza/Cordoba) to ensure it matches your specific car model and year.
  • Confirm Switch Type: This product is a single unit with two control buttons. Ensure this is the correct configuration for your vehicle's needs (e.g., driver's side master switch).
  • Professional Installation: If you are unsure about the installation process, it is recommended to seek assistance from a qualified automotive technician to avoid damage to your vehicle or the product.

9. Warranty & Support

For product support, warranty claims, or further inquiries, please contact the manufacturer or their authorized representative:

Manufacturer Information:

  • Company Name: Guangzhou yangchi auto parts co.LTD
  • Address: CN-2 # 1003 min jie ke chuang, minying ke ji yuan, tai he zhen, baiyun district, Guangzhou, China
  • E-Mail: ouyan99@dingtalk.com
  • Telephone: 86-18102513142

EU Authorized Representative:

  • Company Name: CET PRODUCT SERVICE LTD
  • Address: Osterholzallee 144, 71636 Ludwigsburg Germany
  • E-Mail: info.cetservice@gmail.com
  • Telephone: +4971416432236

A detailed user manual in PDF format is also available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.