QIDEWIN Flush Mount Driving Spotlight Headlight Kit

Contents

QIDEWIN Flush Mount Driving Spotlight Headlight Kit User Manual

Model: Flush Mount Driving Spotlight Headlight Kit (3-inch / 4-inch variants)

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your QIDEWIN Flush Mount Driving Spotlight Headlight Kit. Designed for enhanced visibility and durability, these LED lights are suitable for a variety of vehicles including Jeep Wrangler, off-road 4x4 trucks, and motorcycles, serving as fog lights or DRL (Daytime Running Lights).

The kit features a new design with high-quality materials, including a back shell made of high thermal conductivity aluminum for extended service life. The lights are equipped with powerful LED chips and a high-definition convex lens to provide a concentrated and wide beam, improving driving vision in various conditions.

2. Safety & Warnings

  • This product is only suitable for DC 9-30V motorcycle and vehicle circuits. It is strictly prohibited to connect to a 220V household power supply.
  • Always power off the vehicle's electrical system during installation to avoid short-circuiting, burning out original vehicle electrical appliances, or electric shock.
  • Do not adjust the lens angle or wiring without authorization to prevent glare. Use the lights according to local traffic regulations.
  • For EU sales, this product complies with CE, RoHS 3.0, and LVD/EMC directives. For North America, it can supplement DOT/FCC.
  • Avoid prolonged direct exposure to the human eye to prevent visual impairment.

3. Product Features

  • New High/Low Beam Design: Features a switchable high/low beam. The spot high beam provides brightest and furthest light, while the low beam offers a flat, wide spread close to the ground.
  • Excellent Brightness: Equipped with powerful LEDs, these flush mount light pods emit a bright 3500LM light, significantly improving visibility.
  • User-friendly Mounting: Designed for easy flush mounting with 4 M5 bolts. Installation involves marking, cutting/drilling holes, and securing the light.
  • High Efficient Performance & Durability: Boasts an IP68 waterproof rating, making it resilient against harsh environments. The aluminum profile with grooved fins ensures efficient heat dissipation for long-lasting performance.
  • Multi-Purpose Use: Can be perfectly mounted on rear bumpers or grills to function as backup/reverse lights, fog lights, or DRLs on various vehicles.
  • Advanced LED Chips: Utilizes a new LED chip matrix arrangement for ultra-high brightness and ultra-long range, increasing safety during driving. Features a high-quality lamp circuit board with a unique anti-aging circuit, built-in EMC, and anti-interference capabilities.
  • Robust Construction: Made with die-cast aluminum 6063 profile, offering shock and vibration proofing. The high-quality surface treatment allows it to work in harsh environments.

4. Specifications

Feature Details
Product Name Motorcycle LED Headlight Kit
Model Compatibility Universal/special car models (H4/BA20D/H6 interfaces)
Light Beam Pattern High/Low Beam, Spot
Operating Voltage DC 10V-30V
Power 60W/pair
Size Options 3-inch (68mm x 70mm), 4-inch (68mm x 81mm)
Light Source 2 pieces XBD50 & 1 piece ETI1860 LEDs
Color Temperature 6000K White
Lens Material HD Glass (PC Protective Cover)
Installation Flush Mount with 4 M5 Bolts
Luminous Flux 7000LM/pair
IP Rating IP68 (Waterproof)
Lifespan 50,000 Hours
External Testing Certification CE

Note: Product size is measured by hand, there may be a 1~3mm error.

3-inch light dimensions: 68mm width, 70mm height

Figure 1: 3-inch Light Dimensions (68mm x 70mm)

4-inch light dimensions: 68mm width, 81mm height

Figure 2: 4-inch Light Dimensions (68mm x 81mm)

5. Setup & Installation

The following steps outline the general installation process for the LED Headlight Kit. Professional installation is recommended if you are unfamiliar with vehicle electrical systems.

  1. Preparation: Turn off the vehicle's engine, unplug the original headlight plug, and disconnect the negative terminal of the battery to prevent short circuits.
  2. Remove Existing Components: Carefully remove the original car lampshade/old light bulb and the original car reflector bowl.
  3. Install New Headlight: Align the interface to install the new lens headlight. Connect the power cord according to your vehicle's wiring diagram. Secure the light using the provided bracket/buckle and 4 M5 bolts.
  4. Initial Test & Adjustment: Reconnect the battery temporarily and switch on the power to test the light. Ensure the brightness is normal. Adjust the height and angle of the lights to achieve optimal illumination without causing glare to other drivers.
  5. Final Assembly: Reinstall the lampshade and restore the battery connection. Conduct a road test to confirm that there is no flickering or other abnormalities during operation.
Components of the headlight kit including the light, mounting bracket, bolts, and wrench

Figure 3: Kit Components (Light, Mounting Bracket, Bolts, Wrench)

Diagram showing the high quality material and easy installation of the light

Figure 4: High Quality Material and Easy Installation

6. Operation

Once properly installed and wired, the QIDEWIN Flush Mount Driving Spotlight Headlight Kit operates in conjunction with your vehicle's existing lighting controls.

  • Turning On/Off: The lights will activate and deactivate with your vehicle's headlight or fog light switch, depending on how they are wired.
  • Beam Selection: If wired for high/low beam functionality, use your vehicle's high beam switch to toggle between the spot high beam and the flat low beam.
Comparison of low beam and high beam illumination on a road

Figure 5: Low Beam vs. High Beam Driving Vision

Lighting effect showing outstanding light coverage and high brightness

Figure 6: Lighting Effect and Coverage

7. Maintenance & Storage

  • Cleaning: Turn off the device before cleaning. Use a soft, lint-free cloth to wipe the lens and housing. Avoid abrasive cleaners or solvents that could damage the finish or lens.
  • Storage: If the lights are removed or stored for an extended period, keep them in a dry place at room temperature (15°C - 35°C).
Image showing the IP68 waterproof rating of the light

Figure 7: IP68 Waterproof Feature

Image showing the cooling system with aluminum alloy fins for heat dissipation

Figure 8: Efficient Cooling System

8. Troubleshooting

  • Lights not turning on: Check all wiring connections for proper contact and ensure the vehicle's power supply is active. Verify fuses related to the lighting circuit.
  • Flickering lights: Ensure all connections are secure and free from corrosion. Check for proper voltage supply (DC 9-30V).
  • Dim lights: Confirm the operating voltage is within the specified range. Clean the lens surface if dirty.
  • Excessive glare: Re-check the light's angle and height adjustment. Ensure it complies with local traffic regulations.

9. User Tips

No specific user tips were available from reviews or Q&A for this product at this time.

10. Disposal & Recycling

This symbol indicates that this product should not be treated as household waste. According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health. Please contact your local authorities for information on proper disposal and recycling facilities.

11. Warranty & Support

This product comes with a 2-year warranty from the date of purchase. For warranty claims or technical support, please contact the manufacturer directly.

Manufacturer Information:

Guangzhou QIDEWIN Electronic Technology Co., Ltd

  • Address: China Guangdong Province GuangzhouBaiyun DistrictYongping SubdistrictGuan Ting Xi Jie No:32

EU Authorized Representative:

SUCCESS COURIER SL

  • Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain

For additional support or inquiries, please refer to the official seller's store or contact their customer service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.