1. Product Overview
The ANLEON S3D digital wireless in-ear monitor system is designed specifically for stage performances or live broadcasts, aiming to provide comfortable high fidelity feedback signals. This receiver supports frequency adjustment, high boost, and left and right channel balance settings, offering excellent sound quality and professional monitoring capabilities for various performers.
2. Setup Instructions
- Charging the Receiver: The S3D Receiver features a built-in 2000mAh lithium battery and supports Type-C charging. Connect a compatible Type-C charger to the receiver. A full charge typically takes approximately 3 hours and provides about 17 hours of operation.
- Connecting Earphones: Plug your 3.5mm earphones into the earphone output interface located on the receiver.
- Pairing with Transmitter: Ensure you are using a compatible ANLEON S3D transmitter (transmitter is not included with the receiver). Follow the transmitter's instructions to set it to the desired frequency.
- Power On: Press and hold the power button on the receiver until the color TFT LCD screen illuminates.
3. Operating Instructions
The receiver features a user-friendly menu design and a clear color TFT LCD screen for intuitive information display.
3.1 Frequency Adjustment
Use the navigation controls on the receiver to access the frequency settings. The receiver bandwidth is 36MHz, with a frequency adjustment step of 25kHz for precise tuning. Select a frequency that matches your S3D transmitter within the supported ranges:
- 560-596MHz
- 640-676MHz
- 863-865MHz
- 902-928MHz
3.2 Audio Settings
The receiver allows for adjustment of audio parameters:
- High Boost: Adjust this setting to enhance high-frequency audio response according to your preference.
- Left and Right Channel Balance: Fine-tune the balance between the left and right audio channels for optimal stereo imaging.
4. Maintenance
- Cleaning: The receiver's aluminum shell is designed to be scratch and wear-resistant. Clean the device with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Battery Care: To prolong battery life, avoid fully discharging the receiver frequently. Recharge the battery when the low battery indicator appears. If storing the device for an extended period, ensure it is partially charged (around 50%) and recharge every few months.
- Storage: Store the receiver in a cool, dry place away from direct sunlight and extreme temperatures.
5. Troubleshooting
- No Sound/Intermittent Audio:
- Ensure the receiver is powered on and fully charged.
- Verify that your earphones are securely plugged into the 3.5mm output.
- Check that the receiver's frequency matches the transmitter's frequency.
- Confirm that the transmitter is powered on and sending a signal.
- Ensure the S3D receiver is not being used with an ANLEON S2/S3 wireless in-ear monitor system, as they are not compatible.
- Short Working Range:
- The typical indoor working range is about 50 meters. Obstacles like walls or large metal objects can reduce this range.
- Ensure the receiver's antenna is unobstructed and properly positioned.
- Check for potential interference from other wireless devices operating on similar frequencies.
- Receiver Not Charging:
- Verify that the Type-C charging cable and power adapter are functioning correctly.
- Ensure the charging port on the receiver is clean and free of debris.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | S3D Receiver |
| Brand Name | TZT |
| Frequency Range | 560-596MHz / 640-676MHz / 863-865MHz / 902-928MHz |
| Earphone Output | 3.5mm interface |
| Receiver Duration (Battery) | About 17 hours |
| Working Range | About 50 meters indoor |
| SNR (Signal-to-Noise Ratio) | 80dB (A) |
| THD+N (Total Harmonic Distortion + Noise) | < 0.2% (1kHz, +4dBu input) |
| Frequency Response | 10Hz - 18kHz |
| Transmitter Power Supply (for compatible transmitter) | 12V DC/300mA |
| Transmitter Output Power (for compatible transmitter) | 10mW |
| Package | Yes (1 x Receiver) |
7. User Tips
- Optimal Performance: For the best audio quality and range, ensure a clear line of sight between the transmitter and receiver whenever possible.
- Frequency Selection: In environments with multiple wireless devices, experiment with different frequency bands to find the clearest channel and avoid interference.
- Earphone Quality: The overall sound experience is significantly influenced by the quality of your earphones. Using high-fidelity earphones will maximize the performance of the S3D Receiver.
- Battery Management: Keep an eye on the battery indicator on the TFT LCD screen to avoid unexpected power loss during performances.
8. Warranty and Support
For warranty information and technical support, please contact the seller or the manufacturer, TZT, directly. Keep your purchase receipt as proof of purchase.
