Introduction
Thank you for choosing the HMG Android Auto Radio. This manual provides comprehensive instructions for the installation, operation, and maintenance of your new car multimedia system. Please read this manual thoroughly before use to ensure proper functionality and to familiarize yourself with all features.
This device is designed for Nissan Qashqai J11 and X-Trail T32 models manufactured between 2013 and 2017. Please note that vehicles equipped with BOSE audio systems cannot be installed with this unit. Additionally, the provided cable only supports original car models without a factory screen. If your vehicle has a factory screen or requires different cabling, please consult with customer service for compatible options.

Setup and Installation
This section outlines the steps for installing your HMG Android Auto Radio. Professional installation is recommended.
Package Contents
Before beginning installation, verify that all components are present:

Wiring Diagram and Connections
Ensure all connections are made correctly according to the wiring diagram. The unit features a powerful cooling fan on the rear to prevent overheating during long-term use.


Interface Annotation
Refer to the following diagram for detailed pin assignments and interface descriptions:

Key Connections:
- GND: Ground
- ACC: Accessory power (Red positive power cable)
- BACK: Reverse signal transmission cable
- KEY1/KEY2: Steering wheel control inputs
- FR+/FR-: Front Right speaker outputs
- FL+/FL-: Front Left speaker outputs
- RL+/RL-: Rear Left speaker outputs
- RR+/RR-: Rear Right speaker outputs
- ILL: Headlight detection cable
- ANT-12V: 12V antenna radio
- GPS Antenna: Connect the GPS antenna for navigation functionality.
- USB Ports: 6Pin and 4Pin USB connectors for external devices.
- 8-PIN Connector (for Canbus): For vehicles with CAN protocol.
Rear Camera Connection
There are two methods to connect a rear view camera:
Method 1: Direct Connection
- Connect the camera's power cable to the reversing camera's power cable.
- Connect the positive pole of the reverse light of the original car to the positive pole of the camera.
- Connect the negative pole of the reverse light of the original car to the negative pole of the camera.
Method 2: Using the Reversing Signal Cable
- Connect the pink or brown reversing signal transmission cable (labeled 'BACK' in the power harness definition diagram) from the harness to the power cable of the reversing camera.
- Connect the positive pole of the reverse light of the original car to the positive pole of the camera.
- Connect the negative pole of the reverse light of the original car to the negative pole of the camera.

Initial Power On and Shutdown
- Boot: Insert the car key, turn on the ACC power. The device will automatically boot and display the boot LOGO animation.
- Shutdown: After removing the car key and turning off the ACC power, the device will automatically shut down.
Operating Instructions
This section details the various functions and how to operate your HMG Android Auto Radio.
Basic Controls and Interface
The main interface is multi-page; swipe left or right to switch between screens. Click the application icon on the main interface to access the application interface.

Physical Buttons:
- Power: Long press for system off screen, short press for mute.
- Main Interface: Press to return to the main interface.
- Return: Press to return to the previous interface and exit the current source.
- Volume Up/Down: Adjusts the volume.
Navigation Function
The unit supports high-precision GPS with precise positioning, voice navigation in multiple languages, offline map support, and online 3D map navigation.

To use navigation:
- Click the navigation icon on the main interface or application interface.
- Map Installation: If no map is pre-installed, copy the map package and APK to an SD card or USB flash drive. Use the File Manager to install the map APK.
- Navigation Path Selection: Go to Settings > Car Settings > General > Set the associated navigation program.
- Navigation Startup: To display the map interface after booting, go to Settings > Car Settings > Factory (password: 000000) > Startup Navigator.
Radio Function
Indulge in radio music, stay updated with news, experience high-quality playback, and enhance your driving experience.

Click the radio function on the main interface or application interface to enter the radio interface. You can search for stations, switch between FM1/FM2, and save stations by long-pressing the frequency.
Bluetooth Function
Enable Bluetooth connectivity for hands-free calls, music streaming, phone book downloads, and access to call records.

To use Bluetooth:
- Click the Bluetooth function icon to enter the Bluetooth interface.
- Pairing Devices: Click the search icon to find nearby devices. Select the device to pair, enter the PIN code if prompted. A successful connection will be indicated by an icon.
- Bluetooth Music: Click the music player icon to stream music from your paired device.
- Bluetooth Address Book: Enter the address book interface, download your phone's contacts, and search for contacts.
Wireless CarPlay & Android Auto
The unit supports both wireless and wired CarPlay/Android Auto without needing additional accessories.

Wireless CarPlay:
- Connect your iPhone to the car radio via Bluetooth.
- Open the 'ZLINK5' app on the radio.
Wired CarPlay:
- Connect your iPhone to the car radio using the original iPhone USB cable (use the 4-pin cable if two are provided).
- Open the 'ZLINK5' app on the radio.
Wireless Android Auto:
- Install the 'Android Auto' app on your cell phone.
- Connect your cell phone to the car radio via Bluetooth.
- Open the 'ZLINK5' app on the radio.
Wired Android Auto:
- Install the 'Android Auto' app on your cell phone.
- Connect your cell phone to the car radio using the original Android USB cable (use the 4-pin cable if two are provided).
- Open the 'ZLINK5' app on the radio.
Mirror Link Function
The Mirror Link function allows you to mirror your smartphone screen onto the radio display.

Wireless Mirror Link (for iPhone):
- Turn on the hotspot on your iPhone.
- Connect the car radio to your iPhone's hotspot.
- Select screen mirroring and then 'Z-mirror'.
Wired Mirror Link (for iPhone):
- Connect your iPhone to the car radio using the original iPhone USB cable.
Wireless Mirror Link (for Android):
- Scan the QR code to install the 'Zplus' app on your phone.
- Connect your phone to the car radio via Bluetooth.
- Turn on the hotspot on your phone.
- Connect the car radio to your phone's hotspot.
- Open the 'Zplus' app on your phone and press 'Start Mirroring'.
Wired Mirror Link (for Android):
- Scan the QR code to install the 'Zplus' app on your phone.
- Connect your phone to the car radio using the original Android USB cable.
- Follow the prompts on your phone.
Sound Settings (Equalizer - EQ)
The unit features an Equalizer (EQ) with 8 sound effects and sound field settings to customize your audio experience. You can adjust bass, loudness, and volume for front left, front right, rear left, and rear right speakers.

To access EQ settings:
- From the application interface, click the EQ icon.
- From the radio or music interface, click the EQ icon.
Reversing Mute: When enabled, the car will have no sound output when reversing. When disabled, sound will be output.
Navigation Channel:
- Front Left and Front Right: Navigation audio outputs only from the front left and right speakers, while rear speakers maintain current audio source.
- All: Navigation audio outputs from all four channels.
Navigation Volume: Adjust the navigation volume using the progress bar. You can also adjust background music volume relative to navigation prompts.
Device Ringtone: Music played when the car receives a call.
Other Functions
- AUX IN: Connect external audio/video sources.
- Video Playback: Supports MP4, AVI, WMV, MOV, MKV, MPEG, RMVB formats.
- Split Screen: Click the split screen icon to display multiple pages simultaneously. Drag pages to the left or right to divide the screen.
- Steering Wheel Learning: Go to Settings > Car Settings > General > SWC setting interface to configure steering wheel controls. Follow the on-screen instructions to map buttons.
- Button Light Settings: Adjust the illumination color of the buttons via Settings > Car Settings > Display > Illumination Color. Choose between automatic color change or manual selection.
- Date and Time: The device automatically calibrates time via network/GPS. Manual adjustment for time zone and format is also available.
- WiFi Connection: The built-in WiFi module allows connection to the internet via mobile hotspot or router for app downloads, streaming, and browsing.

Maintenance
To ensure the longevity and optimal performance of your HMG Android Auto Radio, follow these general maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the screen and exterior surfaces. Avoid abrasive cleaners or solvents that could damage the finish.
- Software Updates: Periodically check for software updates to ensure you have the latest features and bug fixes. Updates can typically be performed via the device's settings menu when connected to Wi-Fi.
- Temperature: Avoid exposing the unit to extreme temperatures. The built-in cooling fan helps manage internal temperatures, but prolonged exposure to direct sunlight or very cold conditions can affect performance.
- Power Management: Ensure the car's electrical system is stable. Sudden power fluctuations can potentially harm the device.
Troubleshooting
If you encounter issues with your HMG Android Auto Radio, refer to the following common problems and solutions:
- Device does not power on:
- Check all power connections (GND, ACC).
- Ensure the car key is in the ACC or ON position.
- No sound output:
- Check speaker wiring connections.
- Verify that the volume is not muted or set too low.
- Ensure 'Reversing Mute' is not active if you expect sound while reversing.
- Check EQ settings for any misconfigurations.
- GPS signal not found or inaccurate:
- Ensure the GPS antenna is properly connected and placed in an area with a clear view of the sky.
- Verify that map data is correctly installed and updated.
- Bluetooth connection issues:
- Ensure Bluetooth is enabled on both the radio and your smartphone.
- Delete previous pairings and try re-pairing the devices.
- Restart both the radio and your smartphone.
- CarPlay/Android Auto not connecting:
- For wired connections, ensure you are using a compatible USB cable (preferably the original one) and the correct USB port (4-pin).
- For wireless connections, verify Bluetooth and Wi-Fi connections are stable.
- Ensure the 'ZLINK5' or 'Android Auto' app is correctly installed and running on your phone and the radio.
- Steering wheel controls not working:
- Ensure the KEY1/KEY2 wires are correctly connected.
- Perform the 'Steering Wheel Learning' procedure in the settings.
- For vehicles with CAN protocol, ensure the correct car type is selected in Factory Settings.
- Rear camera not displaying:
- Check the camera's power and video signal connections.
- Ensure the 'BACK' wire is correctly connected to the reverse light signal.
If problems persist after attempting these solutions, please contact customer service for further assistance.
Specifications
The HMG Android Auto Radio is equipped with advanced features and robust hardware for a superior in-car experience.

| Feature | Specification |
|---|---|
| Operating System | Android |
| RAM | 8G (available in variants) |
| ROM | 128G (available in variants) |
| Display Size | 8 inches |
| Resolution | 1280*720 |
| Touch Screen | Yes |
| Built-in Screen | Yes |
| Din Size | One Din |
| Out Power | 45*4 W |
| Voltage | 12 V |
| Interface | PIN TO PIN |
| Special Features | WiFi function, Support 3G/4G Network, Support Can-Bus, Built-in GPS, Charger, Mobile Phone, MP3 players, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support including English, Italian, German, French, Spanish, etc. |
| Certifications | CE, RoHS, WEEE |


User Tips
Based on common user inquiries and experiences, here are some helpful tips:
- Compatibility Check: Always confirm compatibility with your specific Nissan Qashqai J11 or X-Trail T32 model year (2013-2017) before installation. Pay close attention to whether your car has a factory screen or a BOSE audio system, as these may affect compatibility.
- 360-Degree Cameras & DAB Radio: If your vehicle is equipped with 360-degree cameras or you wish to use DAB radio, verify that the specific radio configuration you purchased supports these features. Some models may require additional adapters or specific software versions.
- Steering Wheel Controls: The unit supports original steering wheel controls. If they are not functioning after installation, ensure the CAN-Bus connection is correct and perform the 'Steering Wheel Learning' procedure in the settings.
- Rear Camera Integration: If you only have a rear camera, ensure it is properly wired according to the provided diagrams. The unit is designed to integrate with existing rear cameras.
- Climate Control Display: For models like the Qashqai J11 2015 with a 7-inch stereo connect series and climate control with a display, confirm that the radio's frame and software are designed to integrate seamlessly with your specific climate control display layout.
Warranty and Support
Your HMG Android Auto Radio comes with a commitment to quality and customer satisfaction.
User Manual (PDF)
A detailed user manual in PDF format is available for download. This document provides additional in-depth information and diagrams.
Customer Service
If you have any questions, require technical assistance, or believe we can improve our service, please contact our customer service team. We are dedicated to providing a satisfying answer and support.
