1. Product Overview
This manual provides instructions for the proper installation and maintenance of your AUTOXBERT Front Left Door Handle Lock Key Hole Cap, designed as a direct replacement part for specified Infiniti models. This cap covers the keyhole area on the front left (driver's side) door handle.
Figure 1: AUTOXBERT Door Handle Lock Key Hole Cap
2. Safety and Warnings
- Color Difference: Due to variations in monitor brightness and ambient lighting, the actual color of the product may vary slightly from the images shown.
- Size Tolerance: This product is manually measured. A dimensional tolerance of ±1-2mm is normal and will not affect installation.
- Installation Safety: If you encounter resistance during installation, do not force the cap. Re-check the alignment and try again. Forcing the cap may cause damage to the product or your vehicle.
3. Setup and Installation
No special tools are required for the installation of this door handle cap.
- Preparation: Ensure the area around the door handle lock cylinder is clean and free of dust or debris. Wipe the surface with a soft, clean cloth.
- Positioning: Locate the keyhole (lock cylinder) area on the front left (driver's side) door exterior.
- Alignment: Carefully match the clips on the back of the new cover with the corresponding slots or contours around the door lock cylinder on your vehicle.
- Press: Apply even pressure around the edges of the cap. You should hear a distinct