Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Yeelight Lightstrip PRO LED Ambilight Strip. Please read this manual thoroughly before use to ensure proper functionality and safety.
Product Description
The Yeelight Lightstrip PRO is an LED ambient lighting solution designed for smart home integration. It features RGB lighting, Wi-Fi connectivity, and compatibility with various smart home platforms.
Components
- Lightstrip (80in, 2m)
- Controller
- Connector
- Data cable
- Power cable
- Adapter (plug will be subject to sales territory standard)
- Lightstrip Plus Extension (40in, 1m each, needs to be purchased separately)
Setup Instructions
-
Assemble the Power Adapter: Plug the appropriate regional adapter into the LED power driver. Rotate by 45 degrees clockwise and snap into place.
Video 1: Unboxing and initial assembly of the Yeelight Lightstrip PRO, demonstrating how to attach the power adapter plug. -
Connect the Lightstrip: Insert the end of the lightstrip with 4 pins into the corresponding socket on the controller, and fasten the buckle to secure the connection.
-
Prepare Installation Surface: Clean the surface where you intend to install the lightstrip. Ensure it is dry and free of dust or debris for optimal adhesion.
-
Install the Lightstrip: Carefully paste and fix the lightstrip to the cleaned surface.
-
Extend the Lightstrip (Optional): If extending the lightstrip, purchase a Yeelight Lightstrip Pro Extension. Open the tail end buckle of the main lightstrip, remove the tail plug, connect the 4-pin end of the extension strip to the tail end of the original strip, and tighten the buckle. Install the tail plug at the new tail end of the extended part and fasten the buckle to complete the connection.
Figure 3: Instructions for trimming and extending the lightstrip. Ensure to trim only at designated 'scissor cut' marks and securely fasten buckles when extending. -
Connect to Power: Connect the assembled lightstrip to the power supply.
Important Setup Notes:
- After connecting an extension strip, ensure the tail plug is correctly plugged into the new tail end of the lightstrip.
- If you cut the lightstrip, set the new length in the app (refer to the Mijia app QR code for details).
Operating Instructions
Manual Control:
- Turn On/Off: Tap the "O" button on the controller to turn the lightstrip on or off.
- Change Color: Tap and hold the "O" button to cycle through favorite colors.
- Dream Color Mode: Double tap the "O" button to activate Dream Color mode.
Intelligent Control:
The Yeelight Lightstrip PRO supports smart control via the Mi Home / Xiaomi Home app, Apple HomeKit, Alexa, and Google Assistant, providing an immersive gaming experience and smart home integration.
Mi Home / Xiaomi Home App:
- Scan the QR code provided in the manual (or search "Mi Home / Xiaomi Home" in your app store) to download and install the app.
- Open the app, tap "+" on the upper right, and follow the prompts to add your device.
- Note: The app version may update; follow current in-app instructions.
Apple HomeKit Smart Control:
- Open the Home App on your iPhone or iPad.
- Click the "+" button and add accessory as per the prompts. Scan the QR code on the product base or input the 8-digit code.
- Ensure your Wi-Fi network is available and has internet access. This product is not compatible with 5G networks.
- For proper HomeKit compatibility, iOS 9 or above is recommended.
- HomeKit codes are required for every reset.
- Apple is not responsible for the operation or compliance of this device.
- To control this HomeKit-enabled accessory, the latest version of iOS or iPadOS is recommended.
- A Home hub (Apple TV 4th gen or later with tvOS 10+, iPad with iOS 10+, or HomePod) allows control away from home and automation.
Maintenance
- Regularly check the lightstrip, power supply, and cables for any damage. Discontinue use if any part is damaged.
- Clean the lightstrip with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Do not disassemble the product.
- Keep the lightstrip away from children under 3 years old.
Troubleshooting
How to Reset:
- Disconnect the power supply from the lightstrip.
- Press and hold the power button on the controller.
- While holding the button, reconnect the power supply.
- Continue holding the button for five seconds until the lightstrip cycles through red, green, and blue, then turns yellow.
- Release the button. The reset is complete.
* Always reset the lightstrip before using it in a new network environment.
Specifications
| Parameter | Value |
|---|---|
| Model Number | YLDD005 |
| Luminous Flux | 200 lm |
| Operating Temperature | -10°C to 40°C |
| Frequency Bands (Wi-Fi) | 2412MHz-2472MHz |
| Frequency Bands (Bluetooth) | 2402MHz-2480MHz |
| Rated Input (Lightstrip) | 24 VDC, 0.21A, 5.1W (80in, 2m) 24 VDC, 0.88A, 21W (400in, 10m) |
| Rated Input (Adapter) | 100-240V~50/60Hz, 0.06A, 5.5W (80in, 2m) 100-240V~50/60Hz, 0.25A, 24W (400in, 10m) |
| Maximum Output Power (Wi-Fi) | 18 dBm |
| Maximum Output Power (Bluetooth) | 6 dBm |
| Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Bluetooth 4.2 BLE |
| System Requirements | Android 4.4 & iOS 10.0 or above |
| Is Bulbs Included | No |
| Is Smart Device | Yes |
| Is Dimmable | No |
| Power Generation | Switch |
| Power Source | AC |
| Installation Method | Self-Contained |
| Certification | CE |
| Origin | Mainland China |
User Tips
- Users have noted the high quality of this LED strip, suggesting a durable and vibrant lighting experience.
Compliance and Support
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
EU Declaration of Conformity:
Qingdao Yeelink Information Technology Co.,Ltd. declares that the radio equipment type YLDD005 is in compliance with Directive 2014/53/EU.
WEEE Disposal and Recycling:
Correct Disposal of this product: This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
For a complete user manual in PDF format, please refer to the official document: Yeelight Lightstrip Pro User Manual (PDF).
Warnings and Safety Information
- Check the voltage before using the product. Improper voltage may damage the product and cause potential safety hazards.
- For indoor use only.
- To prevent early product failure, the lightstrip should only be installed in operating environments ranging between -10°C to 40°C.
- The lightstrip is not waterproof.
- Regularly check the cable, the power supply, and all other parts. Do not use this luminaire if any part is damaged.
- The external flexible cable or cord of this luminaire cannot be replaced. Do not use the luminaire when the cable or cord is damaged.
- The lightstrip is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
- Do not disassemble the product privately.
- Keep the lightstrip away from kids under 3 years old.
- Maximum interconnected length is 400in (10m).
- Do not bend the LED inside the lightstrip in more than 90 degrees to avoid any possible damage.
- Do not connect the lightstrip to the power supply when it is in the package.
- Interconnection shall be made only by the use of the supplied connectors. Any open end must be sealed-off before use.
- Do not use the lightstrip when covered or recessed into a surface.
- Do not open or cut the lightstrip.
- Under normal use conditions, this equipment should be kept at a separation distance of at least 20cm between the antenna and the body of the user.