WESA CCB-02-HUI-D

Contents

WESA Modular Wall Switches and Sockets User Manual

Model: CCB-02-HUI-D

1. Product Overview

The WESA CCB-02-HUI-D series offers a range of modular, wall-embedded switches and power sockets designed for residential and general-purpose applications. These units feature a skin-feel paint finish and allow for DIY combination to create integrated panels tailored to your needs. The product is made from high-temperature flame-retardant plastic, ensuring safety and durability.

Grey single socket with ground

Image: A single grey wall-embedded socket with ground, showcasing the product's design.

Video: A demonstration of the modular design, showing various color combinations and the assembly process of a socket and frame.

2. Safety & Warnings

▲ Important Safety Information

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

3. Installation and Setup

Proper installation is crucial for the safe and effective operation of your WESA modular wall switches and sockets. If you are unsure about any steps, please consult a qualified electrician.

3.1 Pre-Installation Checklist

  • Ensure the main power switch to the circuit is turned OFF before beginning any installation work. This is critical to prevent electrical shock.
  • Verify that the product is suitable for your electrical system (e.g., 220V socket type).
  • Inspect all components for any signs of damage. Do not install damaged parts.

3.2 Wiring Instructions

The wiring for these devices typically involves three types of wires: N (zero wire), L (live wire), and E (ground wire). Connect the wires according to the specific diagram for your module type. Refer to the detailed wiring diagrams in the official user manual PDF for precise connections.

For detailed wiring diagrams, please refer to the User Manual (PDF).

3.3 Assembly of Modular Components

The WESA system allows for flexible combination of switches and sockets within multi-gang frames. Modules snap into place within the chosen frame.

Various modular panel configurations and individual components

Image: Illustrates different panel sizes (Two, Three, Four, Five panel) and individual switch/socket modules, demonstrating the modularity.

  1. Ensure the electrical box is properly installed and secured in the wall.
  2. Connect the wiring to the back of each switch or socket module as per the wiring diagrams.
  3. Carefully insert the wired modules into the desired positions within the chosen multi-gang frame. They should click securely into place.
  4. Mount the assembled frame with modules onto the electrical box, securing it with screws.
  5. Attach the decorative faceplate to the frame.
  6. Once all components are securely installed, restore power to the circuit from the main switch.

4. Operation

Operating your WESA switches and sockets is straightforward:

  • Switches: Press the switch button to toggle the connected light or appliance ON/OFF.
  • Sockets: Insert a compatible plug into the socket to power your devices. Ensure the plug is fully inserted.
Multi-position switch, mix and match freely

Image: A modular setup showing a socket and a blank panel, highlighting the "mix and match" capability.

5. Maintenance

  • Cleaning: To clean the surface of the switches and sockets, gently wipe with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
  • Inspection: Periodically check the units for any signs of wear, damage, or loose connections. If any issues are found, discontinue use and consult a qualified electrician.
  • Storage: If removing the device for an extended period, turn off the main power, carefully uninstall, and store it in a dry place away from children.
High temperature flame retardant material

Image: Illustrates the product's high-temperature flame-retardant material, emphasizing safety features.

Layer by layer protection, safe and reassuring

Image: Depicts the product's protective features, ensuring safety and reliability.

6. Troubleshooting

  • No Power to Socket/Switch:
    • Check if the main circuit breaker for the area is tripped.
    • Ensure the device is correctly wired and all connections are secure (refer to Section 3.2).
    • Verify that the power supply to the circuit is active.
  • Switch Not Responding:
    • Confirm the connected light or appliance is functional.
    • Ensure the switch mechanism is properly seated within the frame.
  • Physical Damage: If any part of the product appears cracked, broken, or burnt, immediately turn off power to the circuit and replace the damaged component. Do not attempt to repair it yourself.

7. Specifications

FeatureDetail
Product NameEuropean Standard Panel
Model NumberCCB-02-HUI-D
BrandWESA
MaterialPlastic
Installation TypeWall Embedded
Socket TypeSocket 220V
Rated Current16A
GroundingNon-Grounding (Variations with ground available)
ShapeRectangular
CertificationsCE, RoHS, WEEE
EU LVD VoltageBelow 50Vac or 75Vdc
Backlight/IndicationNot present
ApplicationResidential / General-Purpose
Package Weight0.11 kg
Package Dimensions19 cm (L) x 14 cm (W) x 3 cm (H)

7.1 Product Dimensions (Approximate)

Detailed dimensions for various switch and socket types

Image: Provides detailed measurements for different panel configurations (Two, Three, Four, Five panel) and individual switch/socket modules, including depth.

Panel TypeDimensions (L x W)
Two Panel142.5mm (5.61in) x 85.5mm (3.37in)
Three Panel213mm (8.39in) x 85.5mm (3.37in)
Four Panel285mm (11.22in) x 85.5mm (3.37in)
Five Panel356mm (14.02in) x 85.5mm (3.37in)

Individual module depths vary: Switches are approximately 45mm (1.77in) deep, and sockets are approximately 48mm (1.89in) deep from the front surface.

8. User Tips

  • Plan Your Layout: The modular system offers flexibility, but note that frames are typically for multiple horizontal units. Plan your desired combination of switches and sockets carefully before purchasing to ensure compatibility and avoid unexpected costs.
  • Custom Combinations: If you require specific combinations of frames, sockets, or colors not immediately apparent, consider contacting the seller directly for guidance on available options or custom orders.

9. Warranty and Support

For product support, warranty inquiries, or to access the full item guides and documents, please contact the manufacturer or authorized representative:

Manufacturer Information:

  • Company Name: Wenzhou Junyuan Technology Co., Ltd
  • Address: No. 1, Yantai Village, Shacheng Street, Wenzhou Economic and Technological Development Zone, Zhejiang Province
  • Email: 714637372@qq.com
  • Phone: 13587405319

EU Authorized Representative:

  • Company Name: MJCM SARL
  • Address: 78 Avenue des Champs-Elysees, Bureau 326
  • Email: mjcm190928@gmail.com
  • Phone: +33 767213611 or 780753377

Additional documentation, including the full user manual, can be found here: Item Guides & Documents (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.