Product Overview
Read this manual carefully before use, and retain it for future reference.
This is a rechargeable blending product featuring high performance and easy portability. This product uses a high-speed motor and a long-lasting battery, which can squeeze juice and make drinks quickly and easily, making light food life simpler and happier.

Components

- Lid Part: Contains the power plug, blade assembly, and charging port.
- Charging Port: For connecting the charging cable.
- Power Plug: Connects to the charging cable.
- Blade Assembly: Houses the blending blades.
- Charging Cable: USB Type-C cable for power.
- Power Adapter: For connecting the charging cable to a power source.
- Sealing Ring: Ensures a leak-proof seal.
- Blades: Stainless steel blades for blending.
- Cup Body Part: The main container for ingredients.
- Cup Protective Sleeve: Provides grip and protection.
- Cup: The blending and drinking container.
- Indicator: LED light showing battery status and blending activity.
- On/Off Button:
- Press once to check battery level.
- Double press to start blending.
- Press once during blending to stop.
Key Features
- High-Capacity Battery: 1300mAh battery, capable of making approximately 12 cups of juice on a full charge.
- Smooth Blending: High-performance lithium battery and 45W power blend finely, resulting in less than 10% residue.
- Versatile Charging: Convenient Type-C port charging, compatible with power banks, in-vehicle chargers, standard adapters, and laptop USB ports.
- Powerful Performance: Equipped with a 19,500rpm DC motor for quick and efficient blending, making fresh drinks in approximately 40 seconds.




Safety Instructions
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- This product is not a toy and it contains small parts; please keep it out of reach of children to prevent choking or other hazardous situations caused by accidental swallowing of small parts.
- This product is for personal and household use only. Do not use it for any commercial purposes.
- The product works for 40 seconds each time. After working three times continuously, it needs to cool down for five minutes before being used again.
- Do not open the cup while using the product, so as to prevent from being scratched by the rotating blades.
- Do not use the blender in abnormal environments, including but not limited to dangerous environments, such as strong magnetic interferences, high temperatures, flammable or explosive gases, to avoid explosion or fire.
- Do not start the product when the blade assembly and the cup are not tightened to prevent the cup from falling off and the blades working exposed, causing personal injury.
- Idling is prohibited, otherwise the product may be damaged.
- Only charge with a power adapter that meets the input parameters of this product. Insert the power plug promptly after charging, to avoid damage to the product due to water intrusion.
- Do not disassemble or repair the product by yourself. If this product works abnormally, please contact the after-sales service team.
- It is strictly prohibited to operate this product in an abnormal way, including disassembling, squeezing, puncturing, short-circuiting this product, and throwing it into fire or exposing it to an environment with temperatures above 50°C.
- Do not operate this product unattended, to avoid it falling from the work surface and causing damage.
- Disconnect the charging cable when using and cleaning the product. Do not touch the blades directly with your hands to avoid being cut. Operate with care when installing the cup sealing ring, to avoid cutting the sealing ring.
- When the product produces smoke, unusual noise or gives off an odor, press the on/off button immediately to stop working and contact the after-sales service team.
- If the blender is not started and there is no indicator light displayed after double pressing the on/off button, please connect it to the power adapter for 1 minute to activate its built-in hardware security protection.
- Before discarding the product, the battery must be removed first. Before removing the battery, power off the product and separate it from the charging cable to ensure that the product is not charging. Then carefully remove the cup and the blades, and saw out a groove with a depth of about 3 mm from the on/off button panel, which is about 3 mm away from the charging port. Use a flat-head screwdriver to pry open the button panel, take out the battery from the blade assembly, and then the battery should be safely disposed of.
- Children shall be supervised not to play with the appliance.
- Be careful when handling the sharp cutting blades, emptying the cup and during cleaning.
- Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to a sudden steaming.
- Always disconnect the blender from the adapter if it is left unattended and before assembling, disassembling or cleaning.
- Do not allow children to use the blender without supervision.
- Switch off the appliance and disconnect from adapter before changing accessories or approaching parts that move in use.
- WARNING - Always operate the blender with the lid or the guard in position as indicated in the instructions.
- This appliance contains batteries that are only replaceable by skilled persons.
- WARNING: For the purposes of recharging the battery, only use the detachable supply unit <A520-050100U-EU2> provided with this appliance.
- There is a potential injury from misuse.
- WARNING! Never use the product close to a water source.
- WARNING! Stop using the product when damaged.
Setup and Operation
Charging the Blender
- Fully charge the product before using it for the first time.
- When charging, the indicator will continue to breathe white.
- Once fully charged, the indicator will stay on for 30 seconds and then turn off.
Checking Battery Level
Press the on/off button once to show the current battery level:
| Indicator Status | Current Battery Level |
|---|---|
| Stays white for two seconds and then turns off | 20-100% |
| Breathes orange two times and then turns off | 2-19% |
| Blinks orange rapidly (error blinks) two times and then turns off | Less than 1% |
Note: The product can be used for 12 times (taking apple juice as an example) after being fully charged.
Blending Instructions
- Prepare Ingredients: Wash fruits, peel, shell, and core them. Cut them into small pieces with a volume of approximately 1 cm³.
- Add Ingredients to Cup: Pour the cut fruits into the cup and add an appropriate amount of water. Be careful not to exceed the 300 mL maximum water level marked on the inner wall of the cup.
- Close and Tighten Lid: Close the cup lid and tighten it clockwise so that the cup lid is aligned with the positioning mark on the cup.
- Start Blending: Double press the on/off button on the top to start juicing. For optimal blending, hold the cup upside down in your hand and shake it up and down during the process.




Recipe Suggestions
| Recipe Name | Ingredients |
|---|---|
| Apple juice | Apples: 120 g (small cubes of 1 cm³), water: 180 mL |
| Orange juice | Oranges: 120 g (peeled, small cubes of 1 cm³), water: 180 mL |
| Banana milk | Bananas: 120 g (peeled, small cubes of 1 cm³), milk: 180 mL |
| Mango yogurt | Mangos: 50 g (peeled, small cubes of 1 cm³), yogurt: 180 mL |
| Blueberry yogurt smoothie | Blueberries: 100 g, yogurt: 100 mL, ice cubes: 50 g (small cubes of 1.5 cm³) |
Notes:
- Double press the on/off button to start. During the process of blending ingredients, shake the product up and down for better smashing effect.
- It is prohibited to add ingredients or liquids over 40°C for blending.
- The total amount of ingredients and liquids in the cup should not exceed 300 mL, and the ratio of ingredients to liquids is 2:3.
Care & Maintenance
- It is necessary to clean the cup, the blade assembly, and the cup sealing ring in time after usage to avoid solidifying and deteriorating of residues, making it difficult to clean or producing odor.
- When the product is not used for a long time, charge it at least once every two months and store it after fully charged to avoid damage to the battery.
- After repeated use, the cup and silicone parts may become stained as the pigments from fruits and vegetables condense on the inner wall of the cup, which is normal.
- Do not put the product into a high-temperature or high-voltage environment such as a dishwasher or disinfection cabinet for cleaning.
- When cleaning the product, do not immerse it in any liquid. This product can be rinsed with water.
- When cleaning the blades, wipe them with a brush or cloth. Do not touch it directly with your hands to avoid cuts.
- Ensure that the power plug is installed in place and there are no foreign objects or liquids around the charging port before cleaning the blade assembly.
- The cup sealing ring can be removed for cleaning. When reinstalling, be careful to avoid the blades to prevent the cup sealing ring from being cut by the blades.
- Dry the parts thoroughly and install them in place after rinsing with water.
- Frequent use will help keep the product in good working order.
Troubleshooting
| Errors | Possible Causes | Solutions |
|---|---|---|
| The blender is not working or the indicator blinks orange. |
|
|
| The blender leaks. |
|
|
| The blender does not work smoothly. | The ingredients are too big and too many in total. | Reduce the ingredients added or cut them into smaller pieces. |
| The blender suddenly stops working. |
|
|
Specifications
| Attribute | Value |
|---|---|
| Name | Xiaomi Portable Blender |
| Model | XMZZB01PL (MJZZB02PL) |
| Capacity | 300 mL |
| Item Dimensions (L x W x H) | 82 x 82 x 197 mm |
| Net Weight | Approx. 531 g |
| Input | 5 V=1 A |
| Rated Power | 45 W |
| Battery Rated Capacity | 1300 mAh |
| Operating Voltage | 7.4 V= |
| Operating Temperature | 0°C to 40°C |
| Single Working Duration | 40 seconds |
| IP Rating | IPX6 |
| Power Adapter Input Voltage | 100-240 V a.c. |
| Power Adapter Rated Power | 5.0 W |
| Power Adapter Rated Output | 5 V=1 A |
| Power Adapter Rated Frequency | 50/60 Hz |
Materials
| Component | Food Contact Material | Usage |
|---|---|---|
| Plastic | PCTG | Cup |
| ABS | Blade Assembly | |
| Metal | 304 Austenitic Stainless Steel (06Cr19Ni10) | Motor Shaft, Blades |
| 303 Austenitic Stainless Steel (Y12Cr18Ni9) | Blade Shaft | |
| Rubber | Fluororubber | Sealing Ring |
| Silicone | Silicone Rubber | Cup Sealing Ring |
User Tips
- Ease of Use: Many users find this blender easy to use and clean, making it convenient for daily routines.
- Portability & Power: Despite its compact size, the blender is noted for its ability to grind fruit effectively.
- Ingredient Size: For optimal performance, ensure ingredients are cut into small pieces to prevent the blades from getting stuck and to achieve a smoother blend.
- Capacity Consideration: The 300ml capacity is suitable for single servings. If you frequently need larger quantities, you might consider a blender with a greater capacity.
Frequently Asked Questions
- Q: Is the cup made of glass?
- A: Yes, the cup body material is Glass (PCTG).
Warranty and Support
Warranty Notice
As a Xiaomi consumer, you benefit under certain conditions from additional warranties. Xiaomi offers specific consumer warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi's official website https://www.mi.com/global/support/warranty. Except as prohibited by laws or otherwise promised by Xiaomi, the after-sales services shall be limited to the country or region of the original purchase. Under the consumer warranty, to the fullest extent permitted by law, Xiaomi will, at its discretion, repair, replace or refund your product. Normal wear and tear, force majeure, abuse or damage caused by the user's negligence or fault are not warranted. The contact person for the after-sale service may be any person in Xiaomi's authorized service network, Xiaomi's authorized distributors or the final vendor who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify.
The present warranties do not apply in Hong Kong and Taiwan. Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi's official seller are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
EU Declaration of Conformity
We, Shenzhen Pinlo Innovation Industrial Co., Ltd., hereby, declares that this equipment Type Blender XMZZB01PL is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address: https://www.mi.com/global/service/support/declaration.html
For detailed e-manual, please go to https://www.mi.com/global/support/user-guide
Manufacturer and Importer Information
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Shenzhen Pinlo Innovation Industrial Co., Ltd. (a Mi Ecosystem company)
Address: Suite 408-03B, Building 2, Block M-10, Ma Que Ling Industrial Zone, Ma Ling Community, Yue Hai Street, Nanshan District, Shenzhen, China
EU Representative: Xiaomi Technology Netherlands B.V., Prinses Beatrixlaan 582, 2595BM, The Hague, The Netherlands. Contact: contact@support.mi.com
Importer: Beryko s.r.o., Pod Vinicemi 931/2, 301 00 Plzeň, Czech Republic. Website: www.beryko.cz
For further information, please go to www.mi.com
Made in China
User Manual Version: V1.0
A PDF version of the user manual is available for download: Download User Manual (PDF)