1. Product Information
This manual provides essential information for the safe and efficient use of your ZODOLAMP Industrial LED Machine Tool Work Light. Please read it thoroughly before installation and operation.
Product Name: Industrial lighting
Model: I-1123
Batch/Serial Number: A251120-01
2. Safety Warnings and Usage Restrictions
WARNING! Failure to follow these safety instructions may result in fire, electric shock, serious injury, or property damage.
2.1 General Safety Precautions
- Risk of Electric Shock: Before any installation, maintenance, or cleaning, ensure the main power supply is disconnected. Non-professionals are strictly prohibited from disassembling internal components.
- Fire and Explosion Warning: Do not place flammable or explosive materials within 50cm of the lamp. Non-explosion-proof products are strictly prohibited in oil, gas, or dust explosion environments.
- Installation Safety: Ensure the installation foundation can support at least 5 times the weight of the lamp. For suspension installations, verify the firmness of hanging chains/rods to prevent falling.
- Prohibition of Modification: Unauthorized modification or disassembly of lighting fixtures will void the warranty and may cause safety hazards.
- Operating Standards: In industrial environments, avoid contact with sharp objects, strong acidic, and alkaline corrosive agents to prevent damage to the lamp's outer shell.
- Grid Adaptation: Do not connect the lighting fixture to power sources outside its rated voltage range to prevent damage to the drive or light source.
2.2 Usage Restrictions
- This lamp is designed for industrial use. Do not use non-explosion-proof lamps in explosion-proof areas. Do not dismantle the explosion-proof structure.
- Do not modify the internal circuits, replace non-original LED light sources, or alter drive power supplies.
- Avoid using high-pressure water guns to directly flush the lighting fixtures, even if rated IP66. Direct high-pressure exposure to the sealed area should be avoided.
- Dimmable models (if applicable) must only be paired with compatible dimmers to prevent damage to the power supply.
- Do not stack items on the lamp's surface or cover heat dissipation holes, as this can affect heat dissipation.
3. Setup and Installation
3.1 Prerequisites
- Before installation, disconnect the main power supply and confirm there is no power.
- Installation must be performed by professional electricians or certified installers.
- The installation location must be able to bear at least 5 times the weight of the lamp.
- Avoid installation in flammable, explosive, or highly corrosive environments, unless using a specific explosion-proof model.
3.2 Installation Steps
- Mounting Base Installation: Use expansion screws to firmly install the hanging code fixing seat at the predetermined position on the ceiling or load-bearing beam. The mounting base is flexibly adjustable. For example, a 405mm total length light can have its base adjusted from a minimum of 75mm to a maximum of 420mm.
- Suspension (if applicable): Connect both ends of the suspension chain to the suspension code fixing seat and the top lifting ear of the lamp. Tighten them with nuts to ensure stable suspension. The stainless steel bracket allows for sliding installation, offering flexibility.
- Wiring:

Image: Close-up of the light's wiring, showing the exposed red and black wires for connection.
Open the wiring port on the side of the lamp (for outdoor models, install a waterproof junction box first). Connect the power supply wires to the internal wires of the lamp as follows:
- Fire wire (Brown/Black) → Lamp L end
- Neutral wire (Blue/White) → Lamp N end
- Ground wire (Green/Yellow) → PE end of lighting fixture
- Finalizing: Organize and store excess power cords. Close the wiring port or waterproof junction box, ensuring a tight seal.
- Testing: After verifying installation firmness and correct wiring, restore the main power supply and test the lamp's lighting status.
3.3 Adjustable Lighting Direction
The lamp features a 120° large-angle adjustment for lighting direction. Loosen the screws on the bracket to adjust its position forward or backward, allowing you to direct light precisely where needed.

Image: A detailed view of the light's bracket, illustrating its 120-degree rotational capability for adjusting the illumination angle.
3.4 Additional Wiring for Dimming Models (if applicable)
If you have a 0-10V/DALI dimming model, connect the dimming signal line from your dimming controller to the corresponding DIM+/DIM- terminals on the lamp. Complete debugging according to your dimmer's manual.
4. Operating Instructions
Once properly installed and wired, the ZODOLAMP Industrial LED Machine Tool Work Light operates by simply supplying power to it via your external control switch. The light will illuminate instantly. Adjust the lamp's angle as needed using the rotatable bracket to optimize illumination for your workspace.
5. Maintenance
- Cleaning: Always disconnect power before cleaning. Use a soft, damp cloth to wipe the lamp's surface. Avoid abrasive cleaners or solvents.
- Protection: The lamp is IP66 rated, making it waterproof and oil-proof. It also features an internal sealing ring to protect against rain damage. However, avoid direct high-pressure water jets on the sealed areas.
- General Care: To maintain the lamp's integrity and performance, avoid contact with sharp objects, strong acidic, or alkaline corrosive agents.

Image: Water is shown splashing over the LED work light, highlighting its IP66 waterproof and oil-proof capabilities, ensuring durability in harsh industrial environments.
6. Troubleshooting
- Light Not Turning On: Check the main power supply, ensure all wiring connections are secure and correct (Live, Neutral, Ground), and verify the external switch is in the 'on' position.
- Flickering Light: This could indicate an unstable power supply or loose connections. Check all wiring and ensure the power source is stable.
- Dimming Issues (for dimmable models): Ensure the dimmer is compatible with the lamp (0-10V/DALI) and that the dimming signal wires (DIM+/DIM-) are correctly connected. Refer to your dimmer's manual for specific instructions.
- Reduced Brightness: Ensure the lamp's heat dissipation holes are not covered and that there are no obstructions affecting its performance.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ZODOLAMP |
| Model | I-1123 |
| Product Name | Industrial lighting |
| Voltage Options | DC 24-36V, AC 100-230V (220V) |
| Power Source | AC |
| Light Source | LED bulbs (High-quality, double-row design) |
| Luminous Flux | 249-2000 Lumens |
| Body Material | Thickened Aerospace Aluminum (Anodized surface) |
| Protection Rating | IP66 (Waterproof, Oil-proof, Explosion-proof) |
| Features | Explosion-proof glass, Rotatable metal base, Stainless steel bracket, Constant current drive, Soft light |
| Is Bulbs Included | Yes |
| Is Batteries Included | No |
| Is Dimmable | No (Some models may support 0-10V/DALI dimming) |
| Use | Industrial |
| Origin | Mainland China |
| Certification | CE, UKCA, RoHS, VDE, UL, SAA, pse, LVD, GS, FCC, EMC, CQC, CCC |

Image: Two ZODOLAMP LED work lights are displayed, highlighting their robust design and indicating available voltage options: 24V~36V and 220V.

Image: A detailed view of the LED work light, with labels pointing to its key components: Aluminum alloy body, High quality LED chip, Explosion-proof glass, and Rotatable metal base.
8. User Tips
- Verify Dimensions: Some users have reported slight discrepancies in dimensions. Always measure your installation space and compare it with the product specifications before final mounting.
- Check Connections: Before permanently mounting the light, perform a quick power-on test to ensure all connections are correct and the light functions as expected.
- Color Temperature: The primary light color is white. If you require a specific color temperature like warm white, please verify available options with the seller.
9. Frequently Asked Questions (FAQ)
- Q: Are the dimensions of this lamp accurate as listed?
- A: While specifications are provided, some users have noted minor variations. It is always recommended to verify the actual product dimensions against your specific installation requirements before proceeding.
- Q: Is a warm white version of this lamp available?
- A: The standard light color for this product is white light. Please check the product options or contact the seller directly to inquire about the availability of other color temperatures, such as warm white.
- Q: What certifications does this lamp hold?
- A: The ZODOLAMP Industrial LED Machine Tool Work Light is certified with CE, UKCA, RoHS, VDE, UL, SAA, pse, LVD, GS, FCC, EMC, CQC, and CCC, ensuring compliance with various safety and quality standards.
10. Warranty and Support
This product comes with a three-year warranty, ensuring quality and reliability. For any warranty claims, technical support, or inquiries, please contact your original point of purchase or the manufacturer directly.
Product Demonstration Video
Video: A comprehensive demonstration of the ZODOLAMP LED Machine Tool Work Light, showcasing its features including explosion-proof certification, high-brightness LED chips, constant current drive for stable illumination, IP66 waterproof and oil-proof rating, fully sealed design, durable stainless steel bracket, and adjustable angle for versatile use.