KKMOON CO2

Contents

CO2 Detector Air Quality Monitor User Manual

Model: CO2 (also known as 10212201498 / H8 Plus)

1. Introduction

This manual provides instructions for the safe and effective use of your CO2 Detector Air Quality Monitor. This device is designed to detect carbon dioxide (CO2) levels, temperature, and humidity in real-time, helping you maintain a healthy indoor environment. Its compact and portable design makes it suitable for various settings including homes, schools, offices, hospitals, restaurants, shopping malls, factories, hotels, and laboratories.

Front view of the CO2 detector display showing CO2, temperature, and humidity readings.
Front view of the CO2 detector display, showing CO2, temperature, and humidity readings. The device refreshes readings in one second.

2. Safety Information

  • WARNING: DO NOT IMMERSE IN WATER!
  • Keep the device away from extreme temperatures and direct sunlight.
  • Do not attempt to disassemble or modify the device.
  • Use only the provided or a compatible DC 5V USB charging cable.

3. Package Contents

Ensure all items are present in the package:

  • 1 x CO2 Detector
  • 1 x USB Charging Cable (Color may vary)
  • 1 x User Manual
The CO2 detector unit alongside its USB charging cable.
The CO2 detector unit and its USB charging cable.

4. Specifications

Feature Detail
Product Material ABS
CO2 Detection Range 400-5000 ppm
CO2 Accuracy 1 ppm
Temperature Measurement Range 0-50 ℃
Temperature Accuracy ± 1 ℃
Humidity Measurement Range 0% - 99% RH
Humidity Accuracy ± 2% RH
Battery Built-in 1200mAh Lithium-ion (Model 18650)
Charging Voltage DC 5V (Type-C interface)
Charging Time Approximately 2.5 hours
Normal Use Time Approximately 6 hours (Standby time: 240-360 minutes)
Dimensions (H x W x D) 90mm x 70mm x 35mm (3.54in x 2.76in x 1.38in)
Batch/Serial Number ALI9377343261
Diagram showing the dimensions of the CO2 detector.
Dimensions of the CO2 detector.
Back view of the CO2 detector with a label detailing its specifications.
Back view of the CO2 detector showing model and battery specifications.

5. Initial Setup

  1. Charging the Device: Connect the provided USB charging cable to the Type-C port on the device and a compatible DC 5V USB power source. USB charging is strongly recommended for optimal performance.
  2. Power On: Press the power button located on the side of the device to turn it on.
  3. Warm-up Period: The device requires a warm-up time of approximately 120 seconds before it can provide accurate readings. Please wait for this period to complete before relying on the displayed values.
Hand pressing the side button of the CO2 detector.
One-button switch for full control.

6. Operating Instructions

6.1 Real-Time Monitoring

  • The device continuously detects the concentration of carbon dioxide (CO2), temperature, and humidity in the air.
  • Readings are displayed on the intelligent full-color LCD screen with clear numbers for intuitive understanding.
CO2 detector held in hand, showing full-color large screen for intuitive reading.
Full-color large screen for intuitive reading.

6.2 CO2 Warning System

  • When the CO2 concentration is between 1600-1999 ppm, a red warning light will flash, and an alarm will sound.
  • If the CO2 concentration exceeds 1999 ppm, four warning lights will flash simultaneously.
CO2 detector held in hand, emphasizing accurate detection.
The device uses infrared detection technology for accurate air quality assessment.

7. Maintenance

  • Cleaning: Wipe the device gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: When not in use for extended periods, store the device in a cool, dry place.
  • Battery Care: To prolong battery life, avoid fully discharging the device frequently. Charge it when the battery indicator is low.
CO2 detector on a table, highlighting long battery life.
The device features a large-capacity 1200mAh battery for extended use.

8. Troubleshooting

8.1 Inaccurate Readings / Calibration

If you suspect the readings are inaccurate after the initial warm-up, the device may need calibration:

  1. Turn on the device.
  2. Take the device to a well-ventilated outdoor area with clean air.
  3. Keep it in this environment for 120 seconds or more.
  4. Double-click the power button. You will hear a 'drip' sound, indicating that the correction process is complete.

9. User Tips

  • For consistent and reliable readings, ensure the device is placed in an area with good air circulation, away from direct drafts or stagnant air pockets.
  • Regularly perform the calibration procedure in fresh outdoor air to maintain accuracy, especially if you notice inconsistent readings.

10. Manufacturer & Support Information

Manufacturer:

Company Name: Baihuashu Handicraft Factory

Full Address: Zhaomiao Village, Fenghuang Industrial Park, Dongchangfu District, Liaocheng City, Shandong Province

Email: a210sumaitn2919@163.com

Telephone: 86-17276659319

EU Authorized Representative:

AR Company Name: SOLID AUTHORITY LIMITED

Full Address: IE-IE-51 Bracken Road, Sandyford, Dublin 18, D18 CV48, Ireland

Email: phoebe8706@gmail.com

Telephone: 33-761441379

For further assistance or inquiries, please contact the manufacturer or their authorized representative using the details provided above.

A PDF version of this user manual is available for download here.

© 2024 KKMOON. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.