Liitokala 32700 LiFePO4 Battery

Contents

Liitokala 3.2V 32700 7000mAh LiFePO4 Battery User Manual

Model: Lii-70A

1. Product Overview

This manual provides essential information for the safe and effective use of your Liitokala 3.2V 32700 7000mAh LiFePO4 battery. Please read it thoroughly before use and retain it for future reference.

Front view of the Liitokala 32700 7000mAh LiFePO4 battery, highlighting its model and capacity.

Figure 1: Front view of the Liitokala 32700 7000mAh LiFePO4 battery, highlighting its model and capacity.

Video 1: A short video showcasing the Liitokala 32700 LiFePO4 battery from various angles, highlighting its size and appearance.

2. Safety Warnings and Precautions

Failure to follow these safety instructions may result in fire, personal injury, or property damage.

  • Fire Risk: Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
  • Disassembly: Do not disassemble, puncture, or squeeze the battery.
  • Short Circuit: Avoid short-circuiting the battery (direct contact between positive and negative terminals).
  • Charging: Use only a dedicated LiFePO4 charger. Do NOT use ternary lithium or lead-acid battery chargers, as this can lead to overcharging and fire.
  • Heat Exposure: Do not throw the battery into fire or expose it to high temperatures (>60°C), as this may release toxic gases.
  • Mixing Batteries: Do not mix batteries of different brands, capacities, or aging levels.
  • Children: Keep out of reach of children.
  • Electrolyte Leakage: If electrolyte leaks and comes into contact with skin or eyes, immediately flush with large amounts of clean water for 15 minutes and seek medical attention.
  • Storage & Transport: Use insulating packaging during transport and storage to prevent positive and negative terminals from contacting conductive materials.
Close-up view of the battery label, showing warnings: 'Do not disassemble, short circuit or heat. Do not mix fresh batteries with used lithium batteries or other battery types. Environmental friendly. CE mark. Made in China.'

Figure 2: Close-up view of the battery label with important warnings.

3. Setup and Application

This LiFePO4 battery is designed for high-power applications. Ensure proper polarity when connecting to devices.

3.1. Typical Applications:

  • Electric Tools: Electric drills, angle grinders, impact drills.
  • Personal Mobility Devices: Electric scooters, balance bikes, electric wheelchairs.
  • Garden Equipment: Lawn mowers, trimmers.
  • Energy Storage: Solar street lights, emergency power supplies, UPS uninterruptible power supplies.
  • Other: High-power flashlights, medical instruments, RC models (ensure voltage matches device requirements).

4. Operating Instructions

4.1. Charging Operation:

  • Charging Mode: Use a 3-stage charging method: Constant Current (0.2C-0.8C, recommended 1A-5.6A) → Constant Voltage (3.65V) → Trickle Charge.
  • Disconnection: Disconnect the charger promptly after charging is complete to avoid prolonged float charging.
  • Temperature: Do not charge the battery in low (<0°C) or high (>45°C) temperature environments.

4.2. Discharging Operation:

  • Continuous Current: The operating current should not exceed the continuous discharge rate (2C = 14A).
  • Peak Current: Instantaneous peak current should not exceed 5C (35A) and should last for no more than 3 seconds.
  • Low Power: Recharge the battery promptly when the device indicates low power (voltage < 2.5V) to prevent over-discharge.

5. Maintenance and Storage

5.1. Storage Maintenance:

  • Long-Term Storage: For storage longer than 1 month, maintain a charge level of 40%-60% and store in a cool, dry place (20°C-25°C is optimal).
  • Recharge Cycle: Recharge the battery once every 3 months to prevent capacity degradation.
  • Charge State: Avoid storing the battery fully charged or completely discharged for extended periods.

6. Troubleshooting

If you encounter issues with your battery, consider the following:

  • Battery Not Charging: Ensure you are using a dedicated LiFePO4 charger and that it is properly connected. Check the charging temperature is within the specified range (0°C-45°C).
  • Battery Not Holding Charge: This could indicate the end of the battery's life cycle or improper charging/storage. Ensure you follow maintenance guidelines.
  • Overheating: If the battery becomes excessively hot during charging or discharging, immediately disconnect it and cease use. This may indicate an internal fault or improper use. Refer to safety warnings.
  • Reduced Performance: Over time, all batteries experience capacity degradation. Ensure the battery is used within its specified operating parameters.

For persistent issues, contact your vendor for support.

7. Specifications

Diagram showing the physical dimensions of the Liitokala 32700 battery: 32mm diameter and 70mm length.

Figure 3: Physical dimensions of the Liitokala 32700 battery.

Parameter Value
Brand Model Liitokala 32700 (Lii-70A)
Battery Type Lithium Iron Phosphate (LiFePO4)
Nominal Voltage 3.2V
Nominal Capacity 7000mAh (0.2C discharge standard)
Dimensions Diameter 32mm × Length 70mm
Weight Approximately 140g
Cycle Life ≥2000 cycles (capacity retention ≥80%)
Charging Termination Voltage 3.65V/cell
Discharge Cut-off Voltage 2.5V/cell
Continuous Discharging Current 2C (14A)
Pulse Discharging Current 5C (35A)
Charging Temperature 0°C ~ 45°C
Discharging Temperature -20°C ~ 60°C
Storage Temperature -20°C ~ 45°C
Internal Resistance ≤8mΩ
Multiple Liitokala 32700 batteries displayed, showing both positive and negative terminals.

Figure 4: Multiple Liitokala 32700 batteries.

8. User Tips

No specific user tips were available from buyer reviews or Q&A content. However, general best practices for LiFePO4 batteries include:

  • Always use a Battery Management System (BMS) when assembling battery packs to ensure cell balancing and protection against overcharge/discharge.
  • Regularly inspect battery terminals for corrosion or damage.
  • Avoid physical shock or dropping the battery.

9. Compliance and Certifications

This product complies with the following standards:

  • Certifications: CE, RoHS, UN38.3 (Dangerous Goods Transport Certification).
  • Execution Standard: GB/T 31484-2015 (Safety requirements for power batteries).

10. Warranty and Support

10.1. Product Warranty:

  • Warranty Period: 12 months from the date of receipt.
  • Warranty Scope: Covers non-human damage, including manufacturing defects and natural aging.
  • Exclusions: The warranty does not cover human-induced damage such as puncture, overcharge, short circuit, or other misuse. Normal capacity degradation (up to 20%) under normal use within the warranty period is expected and not covered as a defect.

For support or warranty claims, please contact your original point of purchase.

© 2024 Liitokala. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.