amagi Dual Port Mini USB Car Charger

Contents

User Manual

amagi 100W/200W Dual Port Mini USB Car Charger

1. Introduction

Thank you for choosing the amagi Dual Port Mini USB Car Charger. This device is designed to provide ultra-fast and efficient charging for your mobile phones, tablets, and other USB-powered devices directly from your vehicle's cigarette lighter socket. Its compact, stealth design ensures it blends seamlessly into your car's interior.

Key Features:

  • Dual USB-A and USB-C ports for simultaneous charging
  • High power output (up to 100W per port, 200W total for compatible models)
  • Supports multiple fast charging protocols (PD, QC3.0, SCP, VOOC, AFC)
  • Ultra-compact and flush-fitting 'stealth' design
  • Durable aluminum alloy construction for efficient heat dissipation
  • Built-in smart chip for over-temperature protection

2. Safety Information

Please read all safety instructions before using this product.

  • Do not overload the charger or your vehicle's electrical system.
  • Observe safe operating procedures.
  • Ensure your vehicle's power outlet is within the specified input voltage (DC 12V-24V).
  • Avoid dropping the device.
  • Keep out of reach of children.
  • Do not disassemble, modify, or attempt to repair the charger.
  • Do not expose the charger to water, moisture, or extreme temperatures.
  • If the charger appears damaged or malfunctions, discontinue use immediately.

3. Setup

  1. Ensure your vehicle's engine is off or in accessory mode.
  2. Locate your vehicle's cigarette lighter or 12V accessory power socket.
  3. Insert the amagi car charger firmly into the socket until it is fully seated and flush with the outlet. The charger's compact design is intended to sit discreetly.
Stealth Design Car Charger Installation
Figure 1: Stealth design showing the charger inserted flush into the cigarette lighter socket.

To remove the charger, gently pull on the small metal handle/tab provided on the top of the charger.

Small Handle for Easy Removal
Figure 2: The small handle allows for easy plugging and unplugging.

4. Operating Instructions

  1. Once the charger is securely plugged into your vehicle's power socket, connect your device's USB charging cable to one of the available ports on the charger (USB-A or USB-C).
  2. Connect the other end of the charging cable to your mobile device.
  3. The charger will automatically detect your device and begin charging. For fast charging, ensure your device and cable support the respective fast charging protocols (PD, QC3.0, etc.).
  4. You can charge two devices simultaneously using both ports.
Dual USB Simultaneous Fast Charging
Figure 3: Dual USB ports allow for simultaneous fast charging of two devices.
Fast Charging Comparison
Figure 4: Experience significantly faster charging speeds compared to ordinary chargers.

5. Maintenance

  • To clean the charger, gently wipe it with a dry, soft cloth.
  • Do not use liquid cleaners, abrasive cleaners, or solvents.
  • Keep the USB ports free from dust, lint, and debris to ensure optimal connection and performance.
  • Store the charger in a cool, dry place when not in use.

6. Troubleshooting

Charger is not working / Device is not charging:
  • Ensure the charger is fully and securely inserted into the vehicle's cigarette lighter socket.
  • Check if your vehicle's power socket is active (some vehicles require the ignition to be on).
  • Try a different USB cable. Faulty cables are a common cause of charging issues.
  • Test with a different device to rule out a device-specific problem.
  • Ensure the input voltage of your vehicle (12V-24V) is compatible.
Device is charging slowly:
  • Ensure your USB cable is of high quality and supports fast charging.
  • Verify that your device supports the fast charging protocols (PD, QC3.0, etc.) offered by the charger.
  • If charging two devices simultaneously, the total power output is shared, which might slightly reduce individual charging speeds depending on the devices' power requirements.
Charger or device is getting hot:
  • The charger is designed with an aluminum alloy body for efficient heat dissipation and a smart chip for over-temperature protection. Some warmth during fast charging is normal.
  • If the charger or device becomes excessively hot, disconnect it immediately and allow it to cool down. Check for any obstructions around the charger or device that might impede airflow.

If the tool is not functioning after troubleshooting, please contact after-sales service for assistance.

7. Specifications

Product Nameamagi Dual Port Mini USB Car Charger
ModelPD04 (as per image)
InputDC 12V-24V
USB-A QC Output5V/3A, 9V/2A, 12V/1.5A (Max 30W)
Type-C PD Output5V/3A, 9V/2A, 12V/2.5A, 15V/2A, 20V/5A (Max 100W)
Total Output20V/4.8A (Max 100W) or 200W Max (depending on model variant)
Number of Output Interfaces2 (USB-A, USB-C)
Dimensions (Approx.)2 cm (Diameter) x 4 cm (Length)
MaterialAluminum Alloy
CertificationsCE, FC, RoHS
OriginMainland China
Product Size Diagram
Figure 5: Product dimensions.

8. User Tips

No specific user tips were available from customer reviews or Q&A for this product at the time of manual creation. However, general tips for car chargers include:

  • Always use high-quality, certified charging cables to ensure optimal performance and safety.
  • For best fast charging results, ensure your device and cable are compatible with the charger's fast charging protocols.
  • Keep the charger's ports clean to prevent connection issues.

9. Warranty and Support

This product comes with a manufacturer's warranty. For specific warranty terms, duration, and support, please refer to the official product page or contact your seller directly. Please retain your proof of purchase for warranty claims.

A detailed user manual in PDF format may also be available for download from the product's official listing or seller's website.

© 2023 amagi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.