aolon RM670

Contents

KHwatch RM670 HiFi Wired Earphone Headset User Manual

Model: RM670 | Brand: aolon

1. Introduction

This manual provides detailed instructions for the use and maintenance of your KHwatch RM670 HiFi Wired Earphone Headset. Designed for high-fidelity audio, clear calls, and comfortable wear, these earphones are compatible with both 3.5mm and Type-C devices. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

KHwatch RM670 Wired Earphones with 3.5mm & Type-C connectors, Hi-Fi Lossless Sound Quality, Noise Reduction, Comfortable In The Ear.
Figure 1: KHwatch RM670 Wired Earphones, highlighting Hi-Fi Lossless Sound Quality, Noise Reduction, and comfortable in-ear design.

2. Package Contents

Please check the box for the following items:

  • 1 x KHwatch RM670 Wired Earphone Headset
  • 1 x User Manual
  • 2 x Pairs of Replacement Silicone Ear Tips (various sizes)

3. Setup and Connection

3.1 Choosing Ear Tips

Select the ear tips that best fit your ears. Proper fitting ear tips are crucial for comfort, sound quality, and effective noise isolation. Gently insert the earphones into your ear canal, ensuring a snug and comfortable seal.

3.2 Connecting to Your Device

The RM670 earphones come with either a 3.5mm jack or a Type-C connector, depending on the model purchased. Connect the appropriate plug to your device's audio port.

White Type-C variant of the KHwatch RM670 Wired Earphones.
Figure 2: KHwatch RM670 Earphones with Type-C connector.

4. Operating Instructions

The earphones feature an in-line control button for easy management of music playback and calls.

  • Play/Pause Music: Press the control button once.
  • Answer/Hang Up Calls: Press the control button once.
  • Next Track: Press the control button twice.
  • Previous Track: Press the control button three times.
Video 1: Demonstration of in-line control button functions for music and calls.

5. Specifications

Parameter Value
Product Model RM-670
Frequency Response 20Hz-20KHz
Output Sensitivity 105±3dB
Microphone Sensitivity (-42)±3dB
Impedance 16Ω
Rated Power 3mW
Driver Unit 10mm
Pin Type 3.5mm / Type-C
Cable Length 1.2m
Net Weight Approx. 13-13.5g
Material Silica Gel
Features With microphone, Active Noise Cancelling, Sound Isolating, Volume Control, Control Button
Style Wired in-ear headphones
Certification CE, FCC

6. Maintenance and Care

  • Clean the ear tips regularly with a soft, dry cloth to prevent wax buildup and maintain hygiene.
  • Store the earphones in a clean, dry place away from direct sunlight, high temperatures, excessive dust, and humidity. These conditions can damage the product's wiring and components.
  • Avoid tangling the cable to prevent damage.

7. Troubleshooting

If you experience issues with your earphones, consider the following:

  • No Sound: Ensure the earphone plug is fully inserted into your device's audio port. Check your device's volume settings.
  • Poor Sound Quality: Verify that the ear tips are properly seated in your ears to create a good seal. Try different sized ear tips. Ensure the audio source is of good quality.
  • Microphone Not Working: Check if the microphone is obstructed. Ensure your device's settings are configured to use the earphone's microphone.

8. User Tips

8.1 Earphone Burn-in

To achieve optimal sound performance, it is recommended to "burn-in" your earphones. This process helps the speaker diaphragms to loosen up and perform at their best. Follow these steps:

  1. Play high-quality music at 30% of normal volume for 12 hours.
  2. Continue playing at 60% of normal volume for another 12 hours.
  3. Use the earphones at normal volume for 72 hours.
  4. Finally, use at 80% of normal volume for 24 hours.

After these steps, the earphones should achieve approximately 90% of their potential performance.

8.2 General Usage Advice

  • Always select the most comfortable and noise-isolating ear tips for your listening environment.
  • Avoid pulling the cable forcefully when disconnecting from your device.

9. Important Safety Information

Responsible for Your Hearing:

  • Hearing Protection: Prolonged continuous use at high volumes can cause hearing damage. It is recommended to use the earphones for no more than 1 hour at a time, with breaks in between.
  • Driving/Riding Safety: Do not use earphones while driving or riding a bicycle, as this can impair your awareness of surroundings and lead to accidents.
  • Environmental Hazards: Avoid using earphones in situations where you need to be aware of your surroundings, such as near traffic or heavy machinery.
Sound Source Noise Level (dB) Effect
Whisper 30 Very quiet
Quiet Office / Normal Conversation 50-60 Comfortable listening range
Vacuum Cleaner / Hair Dryer 70 Intrusive, but generally safe
Food Blender / Garbage Truck / Cement Mixer 85-90 85dB is the level at which hearing damage begins with prolonged exposure (e.g., 8 hours).
Power Saw / Jackhammer 100 Risk of hearing damage after 15 minutes.
Rock Concerts (varies) 110-140 Exposure over 1 minute may cause permanent damage. Threshold of pain begins around 125dB.

10. Warranty and Support

For warranty information or technical support, please refer to the seller's policy or contact the point of purchase. Keep your proof of purchase for any warranty claims.

A comprehensive user manual in PDF format may be available for download. You can access it via this link: KHwatch RM670 User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.