1. Product Overview
This product is an auxiliary accessory designed to replace and upgrade the original side mirror turn signal lights on compatible vehicles. It provides enhanced visibility and meets relevant automotive lighting industry standards.
2. Safety & Warnings
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- This product is for normal replacement and upgrade of original lights, not for illegal modification or illegal use.
3. Package Contents
The package typically includes:
- 1x Left Side Mirror Turn Signal Lamp (or 1x Right Side, or 1 Pair depending on selection)
4. Specifications
| Feature | Detail |
|---|---|
| Condition | New |
| Case Color | Clear Lens |
| Light Color | Amber |
| Material | ABS & LED |
| OEM NO. | 87613-3J000, 87623-3J000 |
| Compatible With 1 | Hyundai Santa Fe 2007-2012 |
| Compatible With 2 | Veracruz IX55 2007-2012 |
| Item Type | Side Mirror Signal Blinker / Turn Signal Indicator Light |
| Product Dimensions (Approx.) | Length: 215mm, Width: 43mm, Height: 44mm, Depth: 100mm |
| Package Weight (Approx.) | 0.24 kg |
| Package Dimensions (Approx.) | 24cm (L) x 6cm (W) x 5cm (H) |
5. Installation Instructions
Please follow these steps carefully for proper installation:
- Remove the rearview mirror cover or housing: Carefully detach the existing mirror cover or housing to access the turn signal light assembly.
- Take out the original mirror side light: Disconnect any wiring and remove the old turn signal light from its housing.
- Connect the new light's wiring plug: Attach the wiring plug of the new RACBOX turn signal lamp to the vehicle's electrical connector.
- Install and fix the new side light firmly: Securely place the new turn signal light into the mirror housing. Ensure it is properly seated and fastened.
- Turn on the light to test normal function: Before reassembling the mirror cover, test the new light by activating your vehicle's turn signals.
Note: If the light does not turn on, please reverse the plug polarity and test again.
6. Operating Instructions
The RACBOX LED Side Mirror Turn Signal Lamp operates automatically in conjunction with your vehicle's existing turn signal system. When the turn signal lever is engaged, the LED lamp will illuminate in an amber color to indicate your intended direction.
7. Maintenance
- Keep the lens clean using a soft cloth and mild automotive cleaner. Avoid abrasive materials that could scratch the lens.
- Periodically check the light for any signs of damage or loose connections.
- No user-serviceable parts inside. Do not attempt to disassemble the unit.
8. Troubleshooting
- Light does not illuminate:
- Ensure the wiring plug is securely connected.
- If the light still does not turn on, reverse the plug polarity and test again.
- Check vehicle's fuse for the turn signal circuit.
- Flickering or intermittent operation:
- Check for loose wiring connections.
- Ensure the light is firmly installed and not vibrating.
9. User Tips
- Before purchasing, always verify the OEM part numbers (87613-3J000, 87623-3J000) and vehicle compatibility (Hyundai Santa Fe 2007-2012, Veracruz IX55 2007-2012) to ensure a correct fit.
- When removing and installing, work carefully to avoid scratching your vehicle's paint or damaging the mirror assembly.
10. Warranty & Support
Standard Warranty
RACBOX represents and warrants to the first end-user ("End-User") of the Product that the Product shall materially conform to Racbox's published specifications in the user manual, subject to the terms and conditions below.
Warranty Period
The Warranty Period for a new Product is One Year (12 Months) from the date a new product is first delivered to the End-User after being purchased.
What is Covered
The Standard Warranty provides support from Racbox ("Support") as well as replacement parts and shipping costs during the Warranty Period. Customers will be covered for replacement parts, partial refund, or full refund in the Warranty Period on any product due to manufacturing defects of components or workmanship.
What is Not Covered
The Warranty does not cover any damage due to abuse, wrong installation, neglect or misuse, extreme environment, unusual physical or electrical stress or interference, exposure to flooding, fire, or electrical problems associated with incoming power or other acts not the fault of Racbox. The Warranty does not cover accessory parts. Racbox is not responsible for damage arising from end-user error and failure to follow instructions relating to Product's use.
How to Get Warranty Service
If you have any questions or need to request a replacement part, please feel free to contact our customer support, either by phone, email, or through our Live Support system.
Manufacturer & EU Representative Information
- Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou, tdlaccount@126.com
- EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND, info@apex-ce.com