REEIIO Wireless Carplay Android Auto Decoder

Contents

REEIIO Wireless Carplay & Android Auto Decoder User Manual

For Land Rover Jaguar Bosch Discovery4 Evoque Freelander2 XE XF XJL

1. Introduction

Thank you for choosing this intelligent vehicle information system. It is a comprehensive navigation and entertainment system that is convenient for users to use, also known as the car infotainment system. Car owners can use their cars to connect their phones for navigation and voice recognition. When parking, you can plug in a USB to listen to music or watch videos. Or when driving, directly connect to your phone and use the mobile app navigation. No longer need to make phone calls with your phone, safe and convenient. The images in this manual are for reference only and are intended as functional instructions. Please refer to the actual onboard system for details. If the manual content does not match the actual product due to functional upgrades or other reasons, no further notice will be given.

2. Safety Precautions

Drivers are not allowed to operate the machine during driving to avoid affecting safe driving and violating traffic regulations. This machine is an electronic product; please follow the safety precautions of ordinary electronic machines. This machine is powered by a 12V-24V5A onboard power supply. Please do not install the machine on a power supply that does not meet the standards to avoid damaging the machine. Please do not disassemble or assemble without authorization. Professional maintenance personnel should be responsible for this. Please do not modify system software or upgrade without authorization. Do not use sharp or hard materials to come into contact with the surface of the host. Do not use in extreme environments; normal operating temperature is -40 to 70°C. Do not pour liquids or chemicals (such as water) onto this machine. Our company does not assume any responsibility for the loss or damage of personal information caused by user's incorrect operation, product maintenance, replacement, or other unexpected situations, nor is it responsible for any other indirect losses caused by this. Our company has the ownership and final interpretation rights of relevant materials such as functional manuals, warranty certificates, and warranty cards.

3. System Composition

The main interface of the in-car system displays various functions. Below are the main pages and a description of each icon.

System main interface showing icons for CarPlay, Android Auto, Mirroring, Media, Settings, Music, Video, Bluetooth, and Video In.
Figure 3.1: System Main Interface Home Pages

Icon Descriptions:

IconFunction Description
CarPlaySupports wired and wireless connections.
Android AutoSupports wired and wireless connections.
MirroringSupports wired and wireless connections for Apple and Android phones.
MediaMedia Options.
SettingsSystem entry points for various functions.
MusicPlays local USB music, supports FAT32 USB format.
VideoPlay local USB drive video, supporting FAT32 USB drive format.
BluetoothiPhone & Android phone Bluetooth connection.
Video InVideo input (function currently not open).
ReturnReturn to the main system interface from the media interface.

4. System Settings - Instructions for Use

The main interface has a "Settings" button, which can be directly clicked to enter the settings main interface.

4.1 General Settings (Adjusting Volume)

System Settings General Settings page showing volume controls and auto-start phone link app option.
Figure 4.1: General Settings Interface
  • Volume: Adjust the overall system volume.
  • Navigation Volume: Adjust the volume specifically for navigation prompts.
  • Auto start phone link app: Check this option to automatically enter the mobile internet mode after entering the system.

4.2 Original Car Settings

Set the reverse image type, reverse trajectory switch, front view camera switch, duration, and microphone type.

Original car settings interface showing options for backup camera, parking sensor, guideline, backup detection, front camera, parking sensor view, and microphone type.
Figure 4.2: Original Car Settings Interface

4.2.1 Setting the Reverse Image Type

  • Select Backup Camera to choose between "After Market Camera", "OEM Camera", or "OEM Panoramic Camera" based on your installed camera type.

4.2.2 Setting the Front View Switch and Duration

Settings for front camera duration, showing options for OFF, 5 Seconds, and 10 Seconds.
Figure 4.3: Front View Camera Settings
  • Set Front Camera to ON/OFF.
  • Set the duration for the forward view image (5 or 10 seconds).

4.2.3 Set Microphone Type

  • Select Microphone to choose between "AfterMarket Microphone" (to add a microphone) or "OEM Microphone" (for the original car microphone).

4.3 Display Settings

Adjust the backlight, contrast, and saturation of the system interface.

Display settings interface showing sliders for Brightness, Contrast, and Saturation.
Figure 4.4: Display Settings Interface
  • Brightness: Adjust the screen brightness.
  • Contrast: Adjust the screen contrast.
  • Saturation: Adjust the screen saturation.
  • Default: Restore display settings to default.

4.4 Sound Effect Settings

You can adjust the sound effects according to your preferences.

Sound effect settings interface showing sliders for Bass, Mid, Treble and preset options like Flat, Classical, Jazz, Pop, Vocal, Rock, Concert, User.
Figure 4.5: Sound Effect Settings Interface
  • Bass, Mid, Treble: Adjust these levels using the sliders.
  • Presets: Select from existing sound effects like Flat, Classical, Jazz, Pop, Vocal, Rock, Concert, or User-defined.

4.5 Language Settings

Set the system language, supporting multiple language choices.

Language settings interface showing a list of available languages including English, Simplified Chinese, Traditional Chinese, Portuguese, Korean, and Spanish.
Figure 4.6: Language Settings Interface
  • Select your preferred language from the list.

4.6 System Settings (Version Information & Factory Mode)

View system version information and enter system factory mode on this page.

System settings interface showing software, hardware, system, Bluetooth, and MCU version information, along with options for Factory reset and Factory mode.
Figure 4.7: System Information and Factory Mode
  • View details such as Software, Hardware, System, Bluetooth, and MCU versions.
  • Options for Factory reset and Factory mode are available.

5. AUX Connection Methods

5.1 Connecting the Original Vehicle AUX Audio

If your original car has an AUX input, select "AUX" on your original car's media interface to enable audio output from the decoder.

Car interior showing the car's media interface with 'Select AUX Audio' highlighted.
Figure 5.1: Selecting AUX Audio

6. CarPlay - Instructions for Use

This section guides you through connecting your iPhone to the system via CarPlay.

Video 6.1: CarPlay Connection Settings and Bluetooth Audio Setup
  1. Enter AUTOABC System: Press "Navigation/NAV" on your car's display to enter the AUTOABC system.
  2. Access CarPlay: From the AUTOABC system interface, select the "CarPlay" icon. The system will prompt you to connect your iPhone via Bluetooth or USB cable.
  3. Connect via Bluetooth:
    • On your iPhone, go to Settings > Bluetooth.
    • On the car's display, select the Bluetooth icon, then choose "Land Rover Carplay_62c1" (or similar device name) from the list.
    • Confirm pairing on both your iPhone and the car's display. Allow contacts and favorites to sync if prompted.
    • Once connected, CarPlay will start.
  4. Wired Connection: Alternatively, simply connect your iPhone to the system's USB port with a data cable. CarPlay will start automatically.

7. Android Auto Connection Method

This section guides you through connecting your Android phone to the system via Android Auto.

  1. Enter AUTOABC System: Press "Navigation/NAV" on your car's display to enter the AUTOABC system.
  2. Access Android Auto: From the AUTOABC system interface, select the "Android Auto" icon. The system will prompt you to connect your Android phone via Bluetooth or USB cable.
  3. Connect via Bluetooth:
    • On your Android phone, go to Settings > Bluetooth.
    • On the car's display, select the Bluetooth icon, then choose "AUTOABC" (or similar device name) from the list.
    • Confirm pairing on both your Android phone and the car's display.
    • Once connected, Android Auto will start.
  4. Wired Connection: Alternatively, simply connect your Android phone to the system's USB port with a data cable. Android Auto will start automatically.

8. Mirroring - Instructions for Use

This feature allows you to mirror your phone's screen onto the car's display.

Video 8.1: AirPlay Connection Settings

8.1 iPhone Screen Mirroring (AirPlay)

  1. Disconnect CarPlay: If your iPhone is already connected to CarPlay, disconnect it first.
  2. Access Mirroring: On the car's system interface, click the "Mirroring" icon. Select "iPhone" from the mirroring options.
  3. Connect to WiFi:
    • On your iPhone, go to Settings > WLAN (Wi-Fi).
    • Connect to the wireless network named "SSID:Land Rover Carplay_62c1_air" (or similar). The default WiFi password is "88888888".
  4. Start Screen Mirroring:
    • On your iPhone, open the Control Center (swipe down from the top-right corner on newer iPhones, or up from the bottom on older models).
    • Tap "Screen Mirroring" and select "Land Rover Carplay_62c1" (or similar).
  5. Your iPhone screen should now be mirrored on the car's display.

8.2 Android Phone Screen Mirroring

To use Android wireless image projection, you need to download the 'MLink' software and obtain the 'Android wireless APK software' from the dealer.

  1. Access Mirroring: On the car's system interface, click the "Mirroring" icon. Select "Android" from the mirroring options.
  2. Connect Bluetooth: Turn on your phone's Bluetooth, search for the device, and connect to it. Confirm pairing.
  3. Set up Personal Hotspot:
    • On your Android phone, go to phone settings and find "Personal Hotspot".
    • Set the hotspot name and password to match the name and password prompted on the "Mirroring" interface.
  4. Open MLink: Return to the main interface of your phone, open the 'MLink' app to use wireless mirroring. For wired connection, simply plug and play.

9. Installation Diagram

Refer to the following diagram for proper installation of the decoder unit.

Detailed wiring diagram for the Land Rover Jaguar Bosch Wireless Carplay Android Auto Decoder, showing connections for power, CAN, microphone, LVDS, and DIP switch settings.
Figure 9.1: LR/JAG BOSCH Installation Diagram

Notes for Installation:

  • NAV: Entry to Module System.
  • HOME MENU: Return to OEM.
  • PHONE: Answer or Hand up.
  • Prev: Previous.
  • Next: Next.
  • MODE: OK Knob (some as OEM).

DIP Switch Settings:

Check DIP settings before installation. Reconnect the white connector after DIP changes.

ModelDIP 1DIP 2DIP 3DIP 4DIP 5DIP 6
RR/F-TYPEONOFFOFFOFFOFFOFF
RR/F-TYPE (NO NAVI)ONOFFOFFOFFOFFOFF
Discovery4 / Evoque / XJONOFFOFFOFFOFFOFF
Discovery4 / Evoque / XJ (NO NAVI)ONOFFOFFOFFOFFOFF
XFONOFFOFFOFFOFFOFF
XF (NO NAVI)ONOFFOFFOFFOFFOFF

10. Troubleshooting

10.1 CarPlay Silent

CarPlay uses the original AUX audio. You need to select AUX on the original car's media interface to have sound available. Some car models, such as Mercedes Benz NTG4.0/NTG4.5 system models, have two types of AUX: AUDIO AUX and Video AUX. Ensure that the AUDIO AUX remains open in the original engineering mode to make any sound.

Mobile phones cannot connect to vehicle Bluetooth or other external devices, otherwise it will occupy CarPlay audio and cause no sound.

Some vehicles have fiber optic multimedia hosts, which are all audio sources for the vehicle. The fiber optic cable needs to be unplugged and inserted into the 48PIN power cord fiber optic port, and then into the multimedia host.

10.2 Rearview Camera Black Screen After Installing CarPlay Module

Because the car module has a rear view interface function, the black screen enters the car reverse screen. The original factory rearview camera needs to enter the in-car system settings interface, find camera settings, rearview camera settings, and select the original camera. If it is a rear view camera and connected to a module, please select the rear camera in the rear camera settings. Please also check if the camera circuit is powered on. If it is a manual transmission car, a 12V line needs to be connected to the module back line at the rear reverse light.

10.3 Incomplete Display or Flashing Screen After Installation

This is because the side dial of the module is incorrect, and different screen sizes have different dial switches. Please adjust the corresponding screen dial according to the dial table on the front of the module.

10.4 Cannot Listen to Original Car Radio When Using CarPlay/Android Auto

Because the sound of CarPlay uses the original car AUX audio and is not the same audio as the radio, it cannot be used simultaneously. For example, you cannot listen to the radio while playing Bluetooth music. If you want to listen to the radio while using the CarPlay function, we suggest downloading a Radio app on your phone and then using it on the CarPlay/Android Auto interface.

10.5 Phone Cannot Connect and Keeps Scrolling Through Connection Interface

For Apple phones, the phone needs to automatically recognize the CarPlay wireless network. If the phone turns off WiFi on the shortcut interface, it will prompt "Unable to automatically recognize the wireless network before tomorrow", resulting in inability to connect. So please do not turn off WiFi in the mobile shortcut interface unless it is necessary. To turn off, please turn off WiFi in the phone settings.

If there is a connection issue, please keep your phone's WiFi and Bluetooth on and restart your phone once. Alternatively, you can restore the network settings on your phone.

11. About Network Usage

The network and traffic used by the car system come from the mobile phone. When connecting the car system to wireless CarPlay, the first time it is necessary to manually connect the car Bluetooth to the phone Bluetooth and keep the phone Bluetooth on. After a successful CarPlay connection, the Bluetooth connection between the phone and the system will automatically disconnect, and then enter the WiFi authentication channel. The in-car system will actively identify dedicated hotspots and transmit pop-up windows to the in-car display screen. To install an iPhone wired connection, simply plug in your phone's data cable to complete the connection.

12. Regarding Driving Safety

Drivers should not operate the machine during driving to avoid affecting safe driving and causing traffic accidents. Safety first, smart entertainment second, please strictly abide by national traffic regulations!

13. User Tips

  • Compatibility Check: Before purchasing or installing, verify compatibility with your specific car model and year. For example, a user inquired about compatibility with a Range Rover Vogue L 405 year 2013. Always confirm your vehicle's infotainment system type (e.g., Bosch, Harman) to ensure proper function.
  • Initial Setup: For the first-time wireless connection, ensure both your phone's Bluetooth and Wi-Fi are enabled. The system often uses Bluetooth for initial pairing and then switches to Wi-Fi for the main CarPlay/Android Auto connection.
  • Audio Source: Remember that CarPlay/Android Auto audio typically routes through the car's AUX input. Ensure your car's media system is set to AUX to hear audio from the connected phone.
  • Software Updates: Due to continuous software upgrades, the screenshots and instructions in this manual may differ slightly from the version you are actually using. Refer to the on-screen prompts for the most accurate guidance.

14. Specifications

Product Information:

  • Car Model: For Jaguar Land Rover BOSCH
  • Product Size: 150*98*25mm
  • Phone OS System Suitable: iOS & Android
  • Car OS System Suitable: Original car's with built-in Wired & Wireless Carplay

Technical Parameters:

ParameterValue
Supported Voltage9-16V, 14.4V (rated)
Storage Temperature-30 to +85 degrees Celsius
Working Temperature-30 to +75 degrees Celsius
Pixel1024*600 high-definition pixels
Wireless Transmission5G
Power Current1A (rated), 3A (Max)
Power Outage Current300mA (Clock is on)
Static CurrentLess than 3mA
Charging VoltageLess than 1.5A (If USB charging current > 3A, the host activates electrical protection to control current within 1.5A to prevent burning).

Package Contents:

  • Power cable
  • LVDS cable
  • Microphones
  • WiFi Antenna
Product information diagram showing the decoder dimensions (150x98x25mm) and included accessories: Power cable, LVDS cable, microphones, and WiFi Antenna.
Figure 14.1: Product Dimensions and Included Components

15. Warranty and Support

This product comes with a 1-year warranty.

For detailed instructions and further assistance, please refer to the comprehensive user manual available in PDF format: View User Manual (PDF).

If you encounter any issues, please get help from us. We are more professional than an auto repair shop. Please do not finalize installation until you have tested every function on your car.

Due to continuous software upgrades, screenshots of this manual may differ from the version you are actually using, without prior notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.