ShangDeLi Car Power Radar Volume Anti-slip Spotlight Switch Button

Contents

ShangDeLi Car Switch Button User Manual

For Ford Focus 2 2004-2010 MK2 Transit and compatible vehicles

1. Product Overview

This manual provides instructions for the installation, operation, and maintenance of your ShangDeLi Car Switch Button. Please read this manual carefully before installation and use to ensure proper function and safety.

1.1. Product Identification

  • Product Name: Car Switch
  • Batch/Serial Number: Button Switch
  • Item Type: SWITCHES
  • Brand Name: ShangDeLi
  • Origin: Mainland China

1.2. Basic Specifications

Feature Specification
Input Voltage DC 12V
Rated Current 1.5A
Rated Power (Max) 18W
Material Flame-retardant ABS
Working Temperature -10°C ~ 60°C
Dimensions (approx.) 3.6cm (width) x 2.8cm (height) x 4cm (depth)

Note: Do not exceed the rated current. For high-power devices, a relay must be used.

Dimensions of the car switch button
Figure 1: Approximate dimensions of the car switch button (3.6cm width, 2.8cm height, 4cm depth).

1.3. Compliance Information

  • CE Marking: This product complies with EU safety standards (LVD – Low Voltage Directive, EMC – Electromagnetic Compatibility Directive, RoHS – Restriction of Hazardous Substances Directive).
  • RoHS Compliance: The product is free of lead, mercury, cadmium, hexavalent chromium, and other hazardous substances, meeting environmental protection standards.

2. Safety Instructions (WARNING!)

Failure to follow these safety instructions may result in electric shock, fire, damage to the product, or personal injury.

  1. Disconnect Power: Always disconnect the negative terminal of the car battery before installation. Do not operate with power on to avoid short circuits, sparks, or damage to the vehicle circuit.
  2. Voltage Compatibility: This product is only suitable for 12V DC vehicle power supply. DO NOT connect to 220V AC household power, otherwise it may cause burning, fire, or electric shock.
  3. Current Limits: The switch has a rated current limit. High-power devices (e.g., lights, air pumps, light bars) must be used with a relay. Do not directly drive heavy loads to avoid overheating and burning the switch.
  4. Secure Wiring: All wiring must be firm and well-insulated. Use heat-shrink tubing or electrical tape to cover all connectors. Exposed metal is strictly prohibited to prevent short circuits and fire.
  5. Waterproofing: Ensure the waterproof gasket is correctly installed and compressed during installation. Keep the switch away from high temperature, oil, and water areas for good waterproofing and heat dissipation.
  6. No Disassembly: Do not disassemble or modify the internal structure of the switch by yourself, as this may compromise its waterproof and insulation performance, leading to failure or danger.
  7. Professional Installation: Non-professionals should install this product under the guidance of qualified automotive electricians. Incorrect wiring can damage vehicle electrical appliances, cause malfunctions, or create safety hazards.
  8. Monitor Performance: If the switch becomes loose, hot, smelly, noisy, or abnormal, stop using it immediately and check or replace it.
  9. Modification Accessory: This product is a car modification accessory. Installation and use must comply with local traffic laws and vehicle safety standards.

3. Setup and Installation

3.1. Preparation

  1. Disconnect the negative terminal of the car battery to cut off power and prevent short circuits or electric shock.
  2. Gather necessary tools: screwdriver, wire stripper, heat-shrink tubing or electrical tape, and a hole punch (if drilling is required).
  3. Verify that all components and accessories are complete and intact.

3.2. Installation Steps

  1. Mounting: Replace the blank reserved switch directly. Insert the new switch from the front of the panel.
  2. Securing: Install the waterproof gasket (ensure no deviation), then install the washer and mounting nut on the back in sequence. Tighten moderately with a screwdriver to ensure the switch is stable and the gasket is fully compressed. If drilling is required, select a suitable position and drill accurately.
  3. Wiring: This product is an on-off switch without voltage conversion. The input voltage is the same as the output voltage (12V-24V DC). Distinguish positive and negative poles to avoid reverse connection. Refer to the wiring diagram below for detailed steps. Wrap all connectors with heat-shrink tubing or electrical tape to prevent exposed metal and short circuits.
Wiring Diagram for the car switch button
Figure 2: Wiring Diagram. Ensure correct connections for proper function and safety.

Wiring Diagram Details:

  • 1# Yellow wire: Positive input wire
  • 2# Black Wire: Backlight negative wire
  • 5# Black Wire: Indicator negative wire
  • 6# Blue Wire: Positive output wire / Positive indicator wire
  • 7# Red wire: Icon backlight positive wire
Back view of the car switch showing the connector
Figure 3: Rear view of the switch, showing the connector for wiring.

3.3. Post-Installation Check

  1. Power-on Test: After wiring, check that all connections are firm, no wires are exposed, and there is no reverse polarity. Reconnect the negative terminal of the battery. Toggle the switch to test whether the LED indicator and the connected electrical device work normally. Check for overheating, abnormal noise, or other abnormalities.
  2. Finishing: After a successful test, organize the wires and fix the excess harness with cable ties to prevent winding and wear. Apply function labels for easy identification. Double-check that the switch is securely installed and the waterproof gasket is properly sealed.

4. Operating Instructions

The ShangDeLi Car Switch Button functions as a simple on/off switch for various automotive accessories. Each switch type (e.g., Power, Radar, Volume, Anti-slip, Spotlight, Seat Heated) is designed to control a specific function.

Car switch button showing 'Turn On' and 'Turn Off' states with LED indicators
Figure 4: The switch illuminates when turned on and turns off when deactivated, indicating its status.

4.1. Basic Operation

  • Activation: Press the switch button to activate the connected device. The switch's indicator light will illuminate (e.g., yellow or blue) to show it is active.
  • Deactivation: Press the switch button again to deactivate the connected device. The indicator light will turn off.

4.2. Indicator Lights

The switch features LED indicators to provide visual feedback on its status:

  • Main Icon Backlight: The primary icon on the switch (e.g., power symbol, radar symbol) is typically backlit (e.g., red wire connection) for visibility in low light conditions.
  • Status Indicator: A separate indicator light (e.g., connected to blue wire for positive indicator) illuminates when the switch is in the 'ON' position, confirming the device is active.

5. Maintenance

To ensure the longevity and reliable performance of your car switch button, follow these maintenance guidelines:

  • Environmental Protection: Keep the switch away from areas of high temperature, excessive oil, and standing water to maintain its waterproofing and heat dissipation capabilities.
  • Regular Inspection: Periodically check the switch for any signs of looseness, physical damage, or wear. Ensure all wiring connections remain firm and insulated.
  • Avoid Disassembly: Do not attempt to disassemble or modify the internal structure of the switch. Unauthorized alterations can compromise its protective features and lead to malfunction or safety hazards.

6. Troubleshooting

If you encounter issues with your car switch button, refer to the following troubleshooting tips:

6.1. Switch Not Functioning / Device Not Activating

  • Check Power: Ensure the car battery is properly connected and has sufficient charge.
  • Wiring Inspection: Verify all wiring connections are secure and correctly matched according to the wiring diagram (Figure 2). Look for any loose wires, exposed metal, or incorrect polarity.
  • Fuse Check: Check the fuse for the circuit the switch is connected to. A blown fuse will prevent power from reaching the switch or device.
  • Rated Current: Confirm that the connected device's power consumption does not exceed the switch's rated current (1.5A / 18W). If it does, a relay is required.

6.2. Indicator Light Not Working

  • Wiring: Check the connections for the backlight negative wire (2# Black), indicator negative wire (5# Black), positive indicator wire (6# Blue), and icon backlight positive wire (7# Red).
  • Switch Status: Ensure the switch is in the 'ON' position for the status indicator to illuminate.

6.3. Overheating, Abnormal Noise, or Smell

  • Immediate Discontinuation: If you notice any of these symptoms, immediately stop using the switch and disconnect power.
  • Load Check: Verify that the connected device is not drawing excessive current, leading to overheating. Ensure a relay is used for high-power devices.
  • Wiring Integrity: Inspect all wiring for short circuits or poor connections that could cause resistance and heat buildup.
  • Internal Damage: If the issue persists after checking external factors, the switch may have internal damage and should be replaced.

6.4. Physical Fit Issues

  • Compatibility: Ensure the switch is compatible with your vehicle's dashboard opening. Some users have noted that while the switch fits Ford Focus 2 2004-2010 MK2 Transit, specific original connectors might vary.
  • Gasket Placement: Recheck the waterproof gasket's position and compression to ensure a snug fit and proper sealing.

7. User Tips

  • Check Compatibility: Before purchasing or installing, verify the switch dimensions and connector type against your vehicle's existing setup to ensure a perfect fit.
  • Easy Installation: Many users find this switch easy to install, often fitting perfectly into existing dashboard slots.
  • Quality Assurance: Users have reported good quality and functionality, with everything working as expected after installation.

8. Frequently Asked Questions (FAQ)

Q: What color do the button lights turn on when connected and activated?

A: The main icon on the button typically has a backlight (e.g., red wire connection) for constant visibility. When the switch is activated (turned 'ON'), a separate status indicator light (e.g., connected to the blue wire for positive indicator) will illuminate, often in a distinct color like blue or green, to show the active state.

Q: Can I place my own vector graphics on the button?

A: The switch buttons come with pre-printed icons (e.g., Power, Radar, Volume, Anti-slip, Spotlight, Seat Heated) and are not designed for user customization of graphics. Attempting to modify the button's surface may damage the switch or its backlighting.

9. Support and Additional Resources

For further assistance or detailed documentation, please refer to the official product guides and documents.

A comprehensive user manual in PDF format is available for download:

View User Manual (PDF)

If you have any questions or require technical support, please contact the ShangDeLi Official Store directly through the platform where you purchased the product.

© 2024 ShangDeLi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.