1. Important Safety Instructions
READ ALL INSTRUCTIONS BEFORE USING YOUR HAND VAC.
When using an electrical appliance, basic precautions should be observed, including the following:
WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
- Do not use outdoors or on wet surfaces.
- Do not allow to be used as a toy. Close attention is necessary when used by or near children.
- Do not use for any purpose other than described in this user guide. Use only manufacturer's recommended attachments.
- Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, please contact service center.
- Do not put any object into opening.
- Do not use with any opening blocked.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- Do not handle charger, including charger plug and charger terminal, with wet hands.
- Do not charge the machine outdoors.
- Use only the charger supplied by the manufacturer to recharge.
- Do not incinerate the appliance even if it is severely damaged. The batteries can explode in a fire.
- Keep openings free of dust, lint, hair and anything that may reduce airflow.
- Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.
- Use extra care when cleaning stairs.
- Do not use without Dirt Bin or filters in place.
- Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.
- Do not use vacuum cleaner in an enclosed space filled with vapors given off by oil-based paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
- Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
- Use only on dry, indoor surfaces.
- Do not pull or carry charger by the cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord.
- Prevent unintentional starting. Ensure the power is OFF before picking up or carrying the appliance. Carrying the appliance with your finger on the power button or energizing appliance that have the power on invites accidents.
- Keep the temperature range between 40-104°F when charging battery, storing machine or during use.
- Do not use appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not expose appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C/265°F may cause explosion.
- Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
2. Package Contents & Product Overview
2.1 Package List
The INSE H1 Handheld Cordless Vacuum Cleaner comes with the following components:
- Base Machine (1x)
- Storage Stand (1x)
- Dust Brush and Crevice Tool (1x)
- Charger (1x)
- HEPA Filter (1x)
- Cleaning Brush (1x)

Image: The INSE H1 vacuum cleaner with its charging base, crevice tool, brush tool, and filter.
2.2 Product Overview
Familiarize yourself with the parts of your INSE H1 vacuum cleaner:
- Handle
- Power Button
- Power Light
- Dust Bin
- Storage Stand
- Charging Port
- HEPA Filter
- Mesh Filter
- Mouthpiece

Image: Main product view highlighting its cordless design, 10000Pa strong suction, and 30-minute long runtime.
3. Technical Specifications
| Feature | Specification |
|---|---|
| Product Category | Handheld Vacuum |
| Product Model | H1 |
| Dust Bin Capacity | 500 ml |
| Product Weight | 2.86 lb (approx. 1.3 kg) |
| Operating Voltage | DC 11.1 V |
| Operating Power | 95W |
| Input Voltage (Charger) | DC 14V (100-240V AC input) |
| Input Current (Charger) | DC 500mA |
| Suction Power | 10000Pa |
| Battery Type | 3-cell 2600mAh |
| Runtime | Up to 30 minutes |
| Charging Time | Approx. 4 hours |
| Filtration System | 4-Layer (Primary, Large Particles, Fine Dust, 0.2-micron Dust) |

Image: Details of the 3-cell 2600mAh battery, providing 30 minutes runtime and 4 hours quick charging.

Image: Diagram illustrating the 4-layer filtration system, effectively removing 99.99% of dust as small as 0.2 microns.
4. Setup & Operating Instructions
4.1 Charging the Battery
Before first use, ensure the vacuum is fully charged.
- Insert the charging cord into the charging port on the back of the machine.
- Connect the charger to a wall outlet.
- Charge the machine completely for about 4-5 hours prior to first use.
Note: Only use the ORIGINAL charger provided. For safety and battery protection, do not overcharge the product. When charging, the power light will blink red. Upon full charge, the light will turn solid green. If charge is required, the light will blink red.
Battery power is closely connected with suction power. Only 35% is charged when it leaves the factory. To experience super suction, it is recommended to charge it fully before use.
4.2 Using Your Handheld Vacuum
- Unplug the machine from the charger.
- Remove the vacuum from its base stand.
- Press the Power Button to turn on.
Note: Before use, make sure that all parts of the product have been installed in place and have sufficient power. It cannot be turned on during charging.
4.3 Combining Accessories
The INSE H1 comes with a 2-in-1 Dust Brush and Crevice Tool. This tool can be used as a crevice tool for hard-to-reach areas or with the brush extended for uneven surfaces like keyboards or car vents.
Video: Demonstration of the INSE H1's powerful suction on various debris, use of the crevice tool for tight spaces, and the dust brush for uneven surfaces and car interiors.

Image: Visual representation of the high-speed motor and powerful suction effectively cleaning beans, food residues, hair, and dust.

Image: The INSE H1 vacuum cleaner being used to clean various parts of a car interior, including seats, air vents, and storage compartments.
5. Cleaning and Maintenance
To maintain the suction power and longevity of your INSE H1 handheld vacuum, regular cleaning and maintenance are essential. Ensure the product is turned off before cleaning.
5.1 Disassembly and Assembly of Dust Bin
To empty the dust bin:
- Rotate the dust bin counterclockwise to unlock it.
- Carefully remove the dust bin from the main unit.
To reassemble the dust bin:
- Align the convex point on the fuselage with the notch in the dust bin.
- Rotate the dust bin clockwise until it clicks into place.
5.2 Emptying Dust Bin
- Remove the dust bin as described above.
- Dump the collected dirt and debris into a waste bin.
- If necessary, the dust bin can be washed with clean water. Ensure it is completely dried before being reinstalled.
5.3 Cleaning Filter Components
The INSE H1 features a multi-layer filtration system that requires periodic cleaning.
- Remove the dust bin.
- Rotate the mesh filter counterclockwise to remove it.
- Carefully take out the HEPA filter.
- Tap the mesh filter to dislodge dust or wash it with water.
- Clean the HEPA filter using the provided cleaning brush.
Note:
- All filter components must be completely dried before being reinstalled.
- The HEPA filter cannot be washed with water; replace it in time when necessary (typically every 3-6 months depending on usage).
- Ensure all filter components are correctly in place when assembling to maintain optimal performance.
6. Troubleshooting
If your INSE H1 handheld vacuum is working abnormally, please turn it off and refer to the table below for common issues and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Doesn't work | Low battery | Fully charge the vacuum |
| Power button not pressed | Press the power button | |
| Charger still plugged in | Unplug the charger | |
| Weak suction | Suction port blocked | Clean the suction port |
| Dust bin is full | Empty the dust bin | |
| Filter component dirty/clogged | Clean the filter component | |
| Short runtime | Operating temperature too high/low | Use in a suitable environment |
| Low battery | Fully charge the vacuum |
7. User Tips
- Regular Filter Cleaning: To maintain optimal suction power, clean the mesh and HEPA filters frequently, especially after vacuuming fine dust or pet hair.
- Full Charge for Best Performance: Always ensure the vacuum is fully charged before use to experience its maximum suction capabilities and runtime.
- Proper Storage: Store the vacuum in its charging stand in a dry place, away from direct sunlight, to prolong battery life and keep it ready for use.
- Versatile Use: Don't limit its use to just cars; it's also great for quick clean-ups in the home, such as crumbs on countertops, pet hair on furniture, or dust in drawers.
8. Warranty & Support
NOTE: THIS WARRANTY TERM GIVES YOU SPECIFIC LEGAL RIGHTS. AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
8.1 12-month Warranty & Lifetime Customer Support
This warranty applies to eligible purchases made directly from INSE authorized distributors. Warranty coverage applies to the original owner and to the original product only and is not transferable.
8.2 How to Initiate a Warranty Claim
If your appliance operates improperly while in use under normal household conditions within the warranty period, please visit the official website www.umlohome.com (or the manufacturer's official support page if different) to fill out the warranty form to initiate a warranty claim, or contact customer support via support@umlohome.com.
All rights are reserved by INSE.