wecus V-W-102

Contents

User Manual: WabiSabi Travertine Ceiling Light

Model: V-W-102

1. Product Overview

The wecus WabiSabi Travertine Ceiling Light is a unique, retro-designed fixture suitable for various indoor spaces. This manual provides essential information for the safe installation, operation, and maintenance of your new ceiling light.

WabiSabi Travertine Ceiling Light

Figure 1: WabiSabi Travertine Ceiling Light (Red Travertine variant)

2. Safety Instructions

WARNING: To prevent electric shock, fire, or personal injury, always follow these safety precautions.

  • Always cut off the power supply at the main circuit breaker before installation, maintenance, or repair.
  • This light fixture is designed for indoor use only. Do not use it in humid locations or where it may come into contact with water, liquids, or flammable materials.
  • During installation, handle the lamp carefully to avoid scratching the lamp surface or damaging the electrical cable.
  • Installation must be performed by a qualified professional electrician.
  • Ensure the voltage supply matches the fixture's requirements (90-260V).

3. Setup and Installation

3.1. Packing List

  • LED Lamp Fixture
  • Mounting Bracket & Screw Pack
  • English Manual (this document)

3.2. Pre-Installation Check

  • Unpack all components and verify they are present and undamaged.
  • Test the light fixture with a compatible E27 bulb before mounting it permanently on the ceiling.
  • Note: Different models may have slight variations in lamp shape, but the general installation method remains similar.

3.3. Installation Guide

Installation Diagram for Ceiling Light

Figure 2: Installation Manual Diagram

This diagram illustrates the steps for mounting the bracket, connecting wires, and attaching the lamp body.

  1. Cut off the Power Supply: Ensure the main power to the installation area is switched off at the circuit breaker.
  2. Install Mounting Bracket: Securely attach the mounting bracket to the ceiling using the provided screws. Ensure it is firmly fixed to a joist or suitable ceiling support.
  3. Wire Connection: Connect the household electrical wires to the fixture's wires. Typically, this involves connecting live to live, neutral to neutral, and ground to ground (if applicable). Use appropriate wire connectors and ensure all connections are secure.
  4. Install Lamp Body: Carefully attach the lamp body to the mounted bracket. Ensure it is securely fastened and properly aligned.
  5. Finish and Power On: Once the lamp body is securely installed, restore power at the circuit breaker and test the light.

4. Operating Instructions

This ceiling light operates via a standard wall switch. Ensure a compatible E27 LED bulb is installed (not included). The fixture supports a voltage range of 90-260V.

Video 1: Product demonstration showing the light turning on and off, and changing color temperatures.

To operate, simply toggle your wall switch. The light will illuminate at the last setting if your bulb has memory function, or at its default setting.

5. Maintenance

  • Cleaning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
  • Bulb Replacement: Ensure power is off before replacing the bulb. Allow the bulb to cool completely before touching it. Unscrew the old E27 bulb and screw in a new, compatible E27 LED bulb.
  • Inspection: Periodically check the fixture for any signs of damage, loose connections, or wear. If any issues are found, consult a qualified electrician.

6. Troubleshooting

  • Light does not turn on:
    • Check if the power supply is on at the main circuit breaker and wall switch.
    • Ensure the bulb is correctly installed and not faulty. Try replacing the bulb.
    • Verify all wire connections are secure (ensure power is off before checking connections).
  • Light flickers:
    • Ensure the bulb is fully screwed in.
    • Check for loose wire connections (power off first).
    • The bulb may be incompatible or faulty. Try a different E27 LED bulb.

If problems persist, consult a qualified electrician.

7. Specifications

Ceiling Light Dimensions and Light Source

Figure 3: Product Dimensions and Light Source Information

FeatureDetail
Model NumberV-W-102
Brandwecus
MaterialStone (Travertine), Iron, Wood
StyleModern Style
Light SourceLED bulbs (E27 Base)
Bulb IncludedNo
Voltage90 - 260 V (AC)
Luminous Flux249-2000 Lumens (bulb dependent)
Lighting Area5-10 square meters
Installation MethodSurface mounted, Assembly
Dimensions (Approx.)12 cm (Diameter) x 10 cm (Height)
Weight (Approx.)1.85 kg
ApplicationKitchen, Dining Room, Bed Room, Foyer, Study, Exhibition Hall, Corridor, Balcony
CertificationCE

8. User Tips

  • Bulb Selection: Choose an E27 LED bulb with a color temperature (e.g., 3000K warm white) and brightness (lumens) that suits your room's ambiance and functional needs.
  • Professional Installation: For safety and optimal performance, always ensure installation is carried out by a certified electrician.

9. Warranty and Support

This wecus ceiling light comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, warranty claims, or any questions not covered in this manual, please contact the seller or your point of purchase.

© 2024 wecus. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.