Yeelight YLKG07YL

Contents

Yeelight Smart Wireless Dimmer Switch User Manual

Model: YLKG07YL

Introduction

The Yeelight Smart Wireless Dimmer Switch provides convenient control over your Yeelight smart lighting devices. This wireless controller allows you to adjust brightness, color temperature, and switch lights on/off with ease, enhancing your smart home lighting experience.

Yeelight Smart Wireless Dimmer Switch, front view

Figure 1: Front view of the Yeelight Smart Wireless Dimmer Switch.

Product Overview

The dimmer switch features a rotary knob for various controls and a hidden pairing button. An indicator light provides feedback during operation and pairing.

Diagram of the dimmer switch showing rotary knob, pairing button, and indicator

Figure 2: Components of the Dimmer Switch: Rotary knob, Pairing button, and Indicator.

Setup Instructions

1. Battery Installation

  1. Ensure you have a CR2032 battery (not included).
  2. Carefully open the dimmer switch to access the battery compartment.
  3. Insert the CR2032 battery, observing the correct polarity.

2. Pairing with Yeelight Devices

To pair the dimmer switch with your Yeelight smart lighting device:

  1. Keep the dimmer switch in the same room as the Yeelight device you wish to control.
  2. Turn on the Yeelight device (e.g., ceiling light, lamp).
  3. Within one minute of powering on the Yeelight device, press and hold the Pairing button on the dimmer switch for more than 3 seconds.
  4. The indicator light on the dimmer switch will flash during the pairing process.
  5. Once pairing is complete, the device will send out a signal, and the indicator will stop flashing.

Video 1: Demonstration of the dimmer switch controlling light brightness and color temperature.

3. Installation

The dimmer switch offers two installation methods:

Method A: Adhesive Mounting

  1. Clean and dry the desired surface thoroughly to ensure optimal adhesion.
  2. Remove the protective film from the adhesive tapes on the back of the dimmer switch.
  3. Firmly press the dimmer switch onto the prepared surface in the desired position.
Diagram illustrating the adhesive installation method for the dimmer switch

Figure 3: Adhesive mounting method.

Method B: Hook & Loop Mounting

  1. Strip off the hook side of the hook & loop fastener from the back of the dimmer.
  2. Attach the loop side to your desired position on the wall.
  3. Press the dimmer switch onto the loop side to secure it. This method allows for easy removal and reattachment.

Operating Instructions

The Yeelight Smart Wireless Dimmer Switch provides multi-functional control through its rotary knob:

Diagram showing multi-function controls of the dimmer switch (Press, Rotate, Press+Rotate, Double Click, Long Press)

Figure 4: Multi-function control diagram.

  • Press (Switch on/off): Tap the rotary knob to turn the connected Yeelight device on or off.
  • Rotate (Adjust brightness): Rotate the knob clockwise to increase brightness, counter-clockwise to decrease brightness.
  • Press + Rotate (Adjust color temperature): Press and hold the knob, then rotate it to adjust the color temperature of the light (from warm to cool).
  • Double Click (Daylight/Moonlight modes switch): Double-tap the knob to toggle between preset Daylight and Moonlight modes.
  • Long Press (Adjust color): Press and hold the knob for an extended period to cycle through different colors of the ambience light (if applicable to the device).

The indicator light will flash briefly for each command sent to the Yeelight device.

How to Unpair

To unpair the dimmer switch from a Yeelight device:

  1. Open the Yeelight App on your smartphone.
  2. Select the specific Yeelight device you wish to unpair from the dimmer.
  3. Navigate to the device settings, usually under

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.