INSE VM6

Contents

INSE VM6 Scrubbing Steam Mop User Manual

Model: VM6

Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your INSE VM6 Scrubbing Steam Mop. Please read all instructions carefully before use and retain this manual for future reference.

For a downloadable PDF version of this manual, please refer to the official product page or contact customer support. The PDF can be found at https://manuals.plus/m/be44069d381bbef63264dbc0ac0ac41f8c8e2bc1e182b39620925acef71f0a42.

Important Safety Instructions

WARNING: To reduce the risk of fire, electric shock, or personal injury, always follow these precautions.

  • This steam floor washer is intended for home use only.
  • Always supervise the appliance when it is powered on. Unplug the power cord when not in use or before maintenance.
  • Do not use a damaged power cord or plug. If the appliance malfunctions, falls, gets damaged, is left outdoors, or is soaked in water, return it to the manufacturer for inspection and repair. Improper reassembly or maintenance can lead to electric shock or personal injury.
  • Do not immerse the steam floor washer in water or any other liquid.
  • Avoid touching the power plug or the steam floor washer with wet hands, or operating it with bare feet.
  • Do not pull the floor washer by its power cord. Do not use the power cord as a handle, clamp it in a door crack, or pull it along sharp edges or corners. Keep the power cord away from heated surfaces.
  • To unplug, grasp the power plug, not the cord.
  • Do not use extension cords or sockets with insufficient current capacity.
  • Always unplug before maintenance.
  • Do not add detergent, perfume, oil, or other chemicals to the water tank. Use purified water to prevent damage and ensure safe operation.
  • Only use accessories recommended by the manufacturer.
  • Do not insert foreign objects into the steam nozzle. Do not use if the steam nozzle is blocked.
  • Keep hands and feet away from the steam floor washer during operation, as the machine becomes very hot.
  • Use this product only on horizontal and flat surfaces. Do not use on walls, counters, or windows.
  • Do not use on leather, waxed furniture, synthetic fiber, velvet, or other delicate, steam-sensitive materials.
  • Do not store the steam floor washer with the mop pad attached for extended periods, as this may damage the floor. Remove the mop pad after use and allow the unit to cool.
  • Do not use the steam floor washer without a mop pad.
  • Keep the work area well lit.
  • Store the steam floor washer indoors in a cool and dry place.
  • Do not lift the steam floor washer when in use.
  • The ejected steam is very hot and can cause burns. Exercise caution.
  • Do not scrub any area for a long time.
  • Do not use on unwaxed wood floors or unglazed tile floors. Test on a small area first, as steam can affect floor luster.
  • To avoid circuit overload, do not operate other equipment on the same circuit as the steam floor washer.
  • To avoid scalding, unplug the steam floor washer and allow it to cool before removing or replacing accessories.

Product Overview

The INSE VM6 is a versatile 10-in-1 scrubbing steam mop designed for effective cleaning and sanitization of various sealed hard floor surfaces. It features rotating mop pads, three steam modes, and LED headlights for thorough cleaning.

INSE VM6 Steam Mop with various attachments

Image: INSE VM6 Steam Mop with its main body, handle, and various cleaning attachments.

Components:

No. Component No. Component
1Handle9Water tank
2Winding hook10Handle
3Telescopic rod adjustment switch11Electric rotating mop head
4Telescopic aluminum rod12Circular dual material mop pad
5Steam switch13Curved nozzle
6Motor button14Big round brush
7Motor indicator light15Crevice brush
8Steam indicator light16Window scraper
17Scraper head
18Small round brush
19Towel set
20Direct nozzle
21Measuring cup

Setup and Assembly

1. Installation of Floor Washer Handle and Telescopic Aluminum Rod:

Align the semicircular notch of the aluminum rod mouth with the semicircular protrusion of the handle connector. Press the upper and lower buckles of the handle connector, align the aluminum rod mouth, and insert the circular buckles of the handle connector into the upper and lower circular holes of the aluminum rod. To disassemble, press the button to pull out the handle.

Diagram showing how to attach the handle to the telescopic aluminum rod

Image: Step-by-step diagram for attaching the handle to the telescopic aluminum rod.

2. Installation of Electric Rotary Mop Head and Circular Dual Material Mop Pad:

Align the two circular mop pads with the left and right wheels respectively, and gently press them on the left and right wheels to firmly adhere.

Diagram showing how to attach mop pads to the electric rotary mop head

Image: Diagram illustrating the attachment of mop pads to the electric rotary mop head.

3. Connecting the Main Body and Electric Rotating Mop Head:

Align the snap hole at the lower end of the fuselage with the snap direction of the base interface buckle, and insert it downward into the base interface until it clicks in place. To disassemble, press the base interface buckle, and the body can be pulled out.

4. Connection/Disassembly of Telescopic Aluminum Rod and Main Body:

Insert the snap of the telescopic aluminum rod into the fixing hole of the telescopic rod of the fuselage until a click is heard. Press the telescopic rod removal switch in the direction of the arrow in the right figure below, and pull out the telescopic aluminum rod upward to remove the telescopic aluminum rod.

Diagram showing how to connect and disconnect the telescopic rod from the main body

Image: Diagram for connecting and disconnecting the telescopic aluminum rod from the main body.

5. Adjusting Product Height:

The product height is adjustable from 1m to 1.2m. Pull the telescopic lever switch clockwise to release the fixing block. Adjust to your desired height, then pull the switch anticlockwise to fasten the fixing block.

6. Adding Water to the Water Tank:

Push the water tank push button upward to remove the water tank. Unscrew the water tank cover, fill it with purified water using the measuring cup, then cover the water tank and install it back onto the main body.

Diagram showing how to remove, fill, and reattach the water tank

Image: Instructions for removing, filling, and reattaching the water tank.

7. Storage of Power Cord:

The winding hook allows for easy storage of the power cord.

8. Installation and Use of Steam Floor Washer Accessories:

Align the snap of the straight nozzle with the snap hole of the main engine and insert it. For other accessories, refer to the diagram for proper connection.

Diagram showing various accessories and their attachment points

Image: Diagram illustrating the various accessories and how they attach to the steam mop for different cleaning tasks.

Operating Instructions

1. Initial Power-On:

After plugging in the power cord, the panel light will flash once, indicating the machine is in standby mode.

2. Functional Operation:

Control panel with steam and motor buttons and indicator lights

Image: Close-up of the control panel showing the Steam switch, Motor button, Motor indicator light, and Steam indicator light.

  1. Steam Generation: Plug in the power supply and press the steam switch. The product will begin heating. The green light of the steam selection key will flash during heating and remain solid once heating is complete.
  2. Steam Mode Selection:
    • Press the steam selection key once for the first gear (Less Steam Mode), and the steam indicator light will be green.
    • Press twice for the second gear (Normal Steam Mode), and the steam indicator light will be blue.
    • Press three times for the third gear (Large Steam Mode), and the steam indicator light will be red.
    • Press four times to turn off the steam. The modes cycle in sequence.
  3. Motor Control: Press the motor button once to start the motor. Press it again to turn off the motor. The motor function cycles in sequence.
  4. Motor Indicator Light: The motor light is always on when the motor is working.
  5. Water Shortage Protection: If the PCB detects low water in the tank, the heating indicator light and steam indicator light will flash 6 times, then the power supply to the heater and water pump will turn off.
  6. Turning Off: Press and hold the steam button for 3 seconds or press the On/Off button to turn off both the steam and motor functions simultaneously.

Important Usage Notes:

  • HOUSEHOLD USE ONLY.
  • DO NOT use outdoors or on wet surfaces.
  • DO NOT immerse in water.

Video: Demonstrates the INSE VM6 Steam Mop in action, showing its scrubbing and steaming capabilities on various floor types and with different attachments.

Maintenance

  • Always unplug the steam floor washer and allow it to cool completely before performing any maintenance or cleaning.
  • After each use, remove the mop pads and clean them. Replace worn or damaged mop pads as needed.
  • To clean the exterior of the steam floor washer, unplug it and wipe with a dry cloth. Do not spill water on the unit or use alcohol, benzene, or paint thinner.
  • Regularly check the steam nozzle for blockages. If blocked, ensure the unit is unplugged and cool before attempting to clear it.
  • Store the steam mop in a cool, dry place. Use the winding hook to neatly store the power cord.

Troubleshooting

1. The steam floor washer does not generate steam:

  • Ensure the power plug is firmly inserted into the socket.
  • Verify the water tank is full.
  • Confirm the power supply is connected and the mode button is on.
  • If the indicator light is off, try a different power outlet.
  • If the indicator light flashes, press the mode button to select a cleaning gear.
  • If the indicator light is always on, wait 30 seconds for preheating to complete.
  • If the issue persists, contact customer service.

2. The steam floor washer generates steam intermittently:

  • Select the "high" steam mode if more steam is desired.
  • Ensure the water tank is full.

3. Cleaning gear cannot be selected:

  • Ensure the power plug is in the socket and the indicator light is flashing.
  • If steam is generating but the indicator light is off, contact customer service.

4. After cleaning, the floor surface is dirty, with traces or spots:

  • Replace with a clean mop pad. If mop pads are washed with detergent, they may be damaged and need replacement.
  • Refer to your floor manufacturer's maintenance and repair instructions before using this product.

5. It is difficult to push and pull the floor washer:

  • If the mop pad is not wet enough, it may be difficult initially. It should become easier after a few minutes of operation.
  • An overly dirty pad can also make it difficult to push and pull. Use a clean mop pad.

6. The rotating disk does not rotate or sway:

  • Ensure the steam floor washer is not in an upright position. Tilt the handle down to use it.
  • The mop pad may be misaligned. Turn off the power, unplug the steam floor washer, allow the mop pad to cool, then reinstall it.

7. Vibration or swing of steam floor washer:

  • The mop pad may not be centered on the rotating disk. Turn off the power, unplug the floor washer, allow the mop pad to cool, then reinstall it following the "Installation of steam floor washer" steps.

Specifications

Parameter Value
Product ModelVM6
Rated Voltage120V
Rated Frequency50/60Hz
Rated Power1300W
Water Tank Capacity330mL
Rotating Speed of Rotary Table110-130 RPM
Steam Volume16-28g/min
Power TypeElectric
FeatureLED Lighting, Steam function
CertificationCE
OriginMainland China

Hazardous Substance Information:

The following table identifies the presence of hazardous substances in the steam floor washer components, in accordance with relevant regulations.

Part Name Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent chromium (Cr (VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ether (PBDE)
Rubber parts (sealing gasket, rubber tube, etc.)ΟΟΟΟΟΟ
Metal structures in contact with water (boiler)ΟΟΟΟΟΟ
HeaterΟΟΟΟΟΟ
Thermal FuseΟΟΟΟΟΟ
Temperature controller (thermal protector)ΟΟΟΟΟΟ
Non flame retardant plastic structure (shell)ΟΟΟΟΟX
Other metal structural parts (shell, support, etc.)ΟΟXΟΟΟ
Standard partsΟΟΟXΟΟ
Printed circuit board assembly (PCB board, harness, etc.)XΟΟΟXX
  • Ο: Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/T26572.
  • X: Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in GB/T26572. The "X" part indicates that due to current global technical and technological level restrictions, it is impossible to achieve a complete replacement of non-environmental substances or elements, and will be gradually improved with subsequent technical updates.
  • *: Indicates that only certain models contain such parts.

User Tips

  • For best results, pre-sweep or vacuum the floor before using the steam mop to remove loose debris.
  • Always use purified or distilled water to prevent mineral buildup and extend the life of your steam mop.
  • Allow the mop to heat up fully before starting to clean to ensure consistent steam output.
  • For stubborn stains, use the "Large Steam Mode" and allow the steam to penetrate for a few seconds before scrubbing.
  • Regularly check and clean the mop pads. Having spare pads on hand can be useful for larger cleaning tasks.

Frequently Asked Questions

1. Can I use the steam floor washer on the carpet?

No, the steam floor washer is not recommended for carpet cleaning.

2. What surfaces can I use the steam floor washer?

The steam floor washer is designed for all sealed hard floor surfaces. It is recommended that you first test an area on the floor to be cleaned and read the use and maintenance instructions of the floor manufacturer.

Warning: Do not use on leather, waxed furniture, synthetic fiber, velvet or other fine materials sensitive to steam.

3. Can I add anything other than water to the water tank of the steam floor washer?

Do not add any cleaning solution, perfume, oil or other chemical substances to the water used for this product, as this may damage the product or make it unsafe to use. It is recommended that you use pure water in the steam floor washer.

Warranty and Customer Support

Warranty Information:

This product comes with a 12-month warranty and lifetime customer support. The warranty applies to eligible purchases made directly from YOMA authorized distributors and covers the original owner and product only. It is not transferable.

Activate Your 1 Year Warranty within one month of purchase!

To activate, send an email to support@yoma-lab.com with the subject line: "VM6 Warranty-US".

How to Initiate a Warranty Claim:

If your appliance operates improperly under normal household conditions within the warranty period, please contact customer support at support@yoma-lab.com or visit www.yoma-lab.com to fill out the warranty form.

For more warranty details, refer to www.yoma-lab.com. All rights are reserved by YOMA official website.

Customer Support:

For any queries regarding your YOMA appliance, visit www.yoma-lab.com for online help, general tips, and useful information. Alternatively, contact customer support via email at support@yoma-lab.com with details of where/when you bought the appliance. Most questions can be resolved by our trained YOMA Aftersales Service staff.

YOMA Contact Details:

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.