1. Introduction
The Yieryi YY-1106 is an advanced 6-in-1 soil detector designed to provide comprehensive insights into your soil's health. This multi-functional device accurately measures soil pH, moisture content, light intensity, fertility, soil temperature, and environmental air humidity. It is an essential tool for home gardeners, greenhouse users, and farm owners seeking to optimize growing conditions and enhance plant yield.
Figure 1: Yieryi YY-1106 6-in-1 Soil Detector showing all measurement parameters and ranges.
- Soil pH Testing: 3.5-9.0 pH
- Soil Moisture: 0-99%
- Soil Fertility: 0-3000 μS/cm
- Sunlight Intensity: 0-100000 LUX
- Soil Temperature: 16-122°F / -9-50°C
- Air Humidity: 0-99%
2. Package Contents
Please check the box for the following items:
- 1 x Yieryi YY-1106 6-in-1 Soil Tester Unit
- 1 x USB Type-C Charging Cable
- 1 x User Manual (this document)
- 1 x Retail Packaging Box
Figure 2: Contents of the Yieryi YY-1106 package.
3. Product Overview
Familiarize yourself with the components of your soil tester:
Figure 3: Labeled diagram of the Yieryi YY-1106 Soil Tester components.
- Light Sensing Receiver: Detects ambient light intensity.
- Display Screen: LCD screen with backlight for clear readings.
- ON/OFF Button: Powers the device on and off, and initiates data collection.
- Alloy Probe: Primary sensor for soil measurements.
- Aluminum Probe: Secondary sensor for soil measurements.
- Type-C Charging Port: For recharging the internal battery.
- Adjustable Head: The display head can rotate 90 degrees for optimal viewing angle.
4. Setup
4.1 Charging the Device
The YY-1106 soil tester features a built-in rechargeable battery. Before first use, or when the battery indicator is low, connect the provided USB Type-C cable to the charging port on the device and to a standard USB power adapter (not included).
Figure 4: Location of the Type-C charging port.
4.2 Initial Preparation
Ensure the soil you intend to test is moist. If the soil is dry, water it thoroughly and wait for about 20-30 minutes before testing to allow the water to distribute evenly. This ensures accurate moisture and pH readings.
5. Operating Instructions
5.1 General Measurement Procedure
- Insert the Probe: Gently insert the metal probes into the soil to a depth of approximately 100-160mm (4-6 inches). Ensure the probes are fully in contact with the soil. Do not force the probes into hard or rocky soil to prevent damage.
- Adjust Viewing Angle: The display head can rotate 90 degrees. Adjust it to your preferred and optimal viewing position.
- Power On & Start Collection: Press the ON/OFF button briefly to power on the device and initiate soil data collection.
- Read Measurements: During the data collection process, the moisture and pH indicators on the screen will flash for approximately 7 seconds. Once the values stabilize, read the measurements directly from the display screen.
- Clean After Use: After each measurement, promptly clean the surface of the metal probes with a soft tissue or a scouring pad to remove any soil residue.
Figure 5: Step-by-step guide for using the soil tester.
5.2 Understanding Specific Measurements
The device displays 6 key parameters:
- Soil Moisture: Indicates the water content in the soil (0-99%). Different plants have varying water requirements.
- Soil pH: Measures the acidity or alkalinity of the soil (3.5-9.0 pH). Most vegetables prefer slightly acidic soil (pH 6.5-6.8).
- Soil Fertility: Determines the nutrient availability for plants (0-3000 μS/cm). Real-time awareness helps in balancing nutrients.
- Light Intensity: Monitors the sunlight status for your soil (0-100000 LUX). Different plants have different light requirements.
- Air Humidity: Displays the environmental air humidity (0-99%). Note: If the probe is inserted into soil, the actual measured value is the soil temperature.
- Soil Temperature: Measures the soil temperature (16-122°F / -9-50°C). This is crucial for nutrient uptake and plant growth.

Figure 6: Soil moisture levels and plant preferences.

Figure 7: Soil pH scale and plant preferences.

Figure 8: Soil fertility measurement.

Figure 9: Light intensity levels and plant preferences.

Figure 10: Air humidity measurement.

Figure 11: Soil temperature measurement.
5.3 Important Usage Notes
To ensure the longevity and accuracy of your soil tester, please observe the following:
- Do not insert the probes into hard soil.
- Do not leave the probes in the soil for extended periods.
- Always wet the soil with water before testing if it is dry.
- This device is designed for soil testing only and cannot be used for hydroponic plants or water-based systems.
Figure 12: Visual guide for important usage precautions.
6. Maintenance
- Probe Cleaning: After each use, wipe the metal probes clean with a soft, damp cloth or tissue to remove any soil particles. Do not use abrasive cleaners.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Recharge the device when the battery indicator is low. Avoid fully depleting the battery for extended periods.
7. Troubleshooting
- Q: Can this soil tester be used for hydroponics?
- A: No, this tester is designed specifically for soil use and is not compatible with water-based or hydroponic systems.
- Q: How deep should I insert the probe?
- A: Insert the probes approximately 10–15 cm (4-6 inches) into moist soil. Do not use in dry or hard soil to avoid damaging the sensor.
- Q: Does it work for all types of plants?
- A: Yes, it supports a wide range of plants including vegetables, flowers, succulents, and fruit-bearing species by providing data for pH, fertility, light, etc.
- Q: How often should I use the device?
- A: Use it once a week or when changing watering/fertilizing schedules. Do not leave it in soil permanently.
- Q: How long does the battery last after charging?
- A: With a full charge via the Type-C cable, it can work continuously for several weeks depending on usage frequency.
- Q: Can the temperature be switched from Fahrenheit (°F) to Celsius (°C)?
- A: Yes, the device supports switching between Fahrenheit and Celsius. Refer to the display for the current unit and any on-screen prompts for switching.
8. Specifications
Figure 13: Product specifications table.
| Feature | Specification |
|---|---|
| Product Model | Six in one soil detector (YY-1106) |
| Measurement Range | pH value / Soil Temp / Soil Moisture / Light Intensity / Environmental Humidity / Soil Fertility |
| Product Color | White |
| Display Mode | LCD screen display with backlight function |
| Usage | Insert into soil |
| Scope of Use | Courtyard gardens, greenhouse planting, etc. |
| Battery Capacity | Type-C power direct charging and storage |
| Net Weight | 74g |
| Product Size | 222 * 46 * 28mm |
| Packaging Size | 246 * 65 * 33mm |
*Note: The measured product size may have a 2-3mm error; please refer to the actual product for accuracy.
9. User Tips
- Consistent Readings: For the most consistent readings, test your soil at roughly the same time of day and under similar moisture conditions.
- Probe Care: Always clean the probes thoroughly after each use to prevent contamination and ensure accurate future readings.
- Moisture is Key: Ensure the soil is adequately moist before testing, especially for pH and moisture readings. Dry soil will yield inaccurate results.
- Avoid Hard Soil: Never force the probes into hard, compacted, or rocky soil, as this can bend or damage the sensors.
- Temporary Use: The device is designed for spot checks. Do not leave it inserted in the soil permanently.
- Temperature Units: If needed, switch between Fahrenheit and Celsius to match your preferred unit of measurement.
10. Warranty and Support
For any questions, technical support, or warranty inquiries, please contact the seller or manufacturer directly through your purchase platform. Please have your order details ready when contacting support.