HICON HZB-16G Ice Machine Instruction Manual

1. Introduction

Thank you for choosing the HICON HZB-16G Ice Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new ice maker. Please read it thoroughly before first use and keep it for future reference.

2. Safety Instructions

• Ensure the power supply voltage matches the rating label on the appliance (220V).
• Do not immerse the appliance, cord, or plug in water or other liquids.
• Unplug from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• Do not use outdoors. This appliance is for household, dormitory, and outdoor use in appropriate conditions.
• Keep hands and utensils out of the ice basket during operation to prevent injury.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Do not use the appliance for other than intended use.
• Supervise children closely when the appliance is in use.
• Ensure proper ventilation around the unit. Maintain at least 10cm clearance on all sides.
• Use only potable water in the water tank.

3. Package Contents

• HICON HZB-16G Ice Machine
• Ice Shovel
• Power Adaptor (specific type depends on region, e.g., CN/US, AU, EU, UK)

4. Product Overview

The HICON HZB-16G is a compact and efficient ice maker designed for convenience. It features a user-friendly control panel, adjustable ice size, and an automatic cleaning function.

4.1 Components

Control Panel Indicators:

• Add Water (加水): Red indicator, illuminates when water level is low.
• Ice Full (冰满): Red indicator, illuminates when ice basket is full.
• Power (电源): Green indicator, shows power status.
• Small Ice (小冰): Green indicator, illuminates when small ice size is selected.
• Large Ice (大冰): Green indicator, illuminates when large ice size is selected.

Control Panel Buttons:

• On/Off (开/关): Powers the unit on or off.
• Select (选择): Toggles between small and large ice cube sizes.

Key internal components include a brand compressor, a side cooling fan for efficient heat dissipation, and a fin condenser.

4.2 Dimensions

• Width: 222 mm
• Height: 290 mm
• Depth: 294 mm

5. Setup

1. Unpack: Carefully remove the ice machine and all accessories from the packaging.
2. Placement: Place the ice machine on a stable, level surface away from direct sunlight and heat sources. Ensure there is at least 10cm of space around the unit for proper ventilation.
3. Clean Before First Use: It is recommended to clean the unit before its first use. Refer to the "Cleaning and Maintenance" section for detailed steps.
4. Connect Power: Plug the power cord into a grounded electrical outlet.
5. Fill Water Tank: Open the lid and fill the water tank with potable water up to the maximum fill line. The water tank capacity is approximately 1.3L.

6. Operating Instructions

1. Power On: Press the "On/Off" (开/关) button to turn on the ice machine. The "Power" indicator will illuminate.
2. Select Ice Size: Press the "Select" (选择) button to choose between small ice (小冰) or large ice (大冰). The corresponding indicator light will illuminate.
   • Small Ice: Approximately 20mm bullet-shaped ice, suitable for milk tea, fruit tea, and other drinks.
   • Large Ice: Approximately 25mm bullet-shaped ice, suitable for whiskey, wine, and other drinks.

   

3. Ice Making Cycle: The machine will begin the ice making process. A single cycle takes approximately 6-10 minutes, producing 9 bullet-shaped ice cubes.
4. Ice Full Indicator: When the ice basket is full, the "Ice Full" (冰满) indicator will light up, and the machine will pause operation. Remove ice to resume. The ice storage capacity is about 60 pieces.

   

5. Add Water Indicator: If the water level in the tank is too low, the "Add Water" (加水) indicator will light up, and the machine will pause. Add more potable water to the tank to resume operation.
6. Power Off: To turn off the machine, press the "On/Off" (开/关) button again.

7. Cleaning and Maintenance

7.1 Automatic Cleaning Function

The HICON HZB-16G features a convenient one-click automatic cleaning function:

1. Ensure the machine is plugged in and in standby mode.
2. Press and hold the "On/Off" (开/关) key for more than 5 seconds to activate the automatic cleaning cycle.
3. The machine will perform a cleaning cycle for approximately 15-20 minutes.
4. After the cleaning cycle, drain the water from the unit.

7.2 Draining Water

To drain excess water from the machine:

• Locate the drain plug at the bottom of the unit.
• Place a container under the drain plug.
• Remove the drain plug to allow water to flow out.
• Once drained, securely replace the drain plug.

7.3 General Cleaning

• Wipe the exterior with a soft, damp cloth.
• Clean the interior, including the ice basket and water tank, with a mild detergent and rinse thoroughly.
• Ensure all parts are dry before reassembling and storing.

8. Troubleshooting

9. Specifications

10. User Tips

• For best results and cleaner ice, always use filtered or distilled water.
• Regularly clean the machine, especially if it's not used daily, to prevent mineral buildup and ensure hygienic ice production.
• If the machine is moved, allow it to stand upright for at least 2 hours before plugging it in to allow the refrigerant to settle.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.