TOOLIOM AG-60 Consumables Kit

Contents

TOOLIOM Plasma Cutter Torch Consumables AG-60 Kit Instruction Manual

For AG-60, AG-60P, SG-55, WSD-60 Plasma Cutting Torches and TOOLIOM TL-50C/HF Pro TL-CUT-50PRO Plasma Cutters

1. Introduction

This manual provides essential information for the proper use and maintenance of your TOOLIOM 24-piece Plasma Cutter Torch Consumables Kit. This kit is designed to be compatible with AG-60, AG-60P, SG-55, and WSD-60 plasma cutting torches, including specific compatibility with 110V/220V TOOLIOM TL-50C/HF Pro TL-CUT-50PRO plasma cutters. Please read these instructions carefully before installation and operation to ensure optimal performance and safety.

2. Package Contents

Your TOOLIOM 24-piece Plasma Cutter Torch Consumables Kit includes the following components:

  • 2 x Outside Nozzles
  • 10 x Extend Tips
  • 10 x Electrodes (Contact Tips)
  • 2 x Brackets
Image showing all 24 components of the plasma cutter torch consumables kit
Figure 2.1: Complete 24-piece Plasma Cutter Torch Consumables Kit

3. Specifications

The consumables are constructed from high-quality metal and ceramic materials for durability and performance. Detailed dimensions for key components are provided below:

ComponentDimensionValue
Electrode (Contact Tip)Length1.06 inches (26.92 mm)
Diameter0.25 inches (6.35 mm)
Extend TipHeight0.82 inches (20.83 mm)
Top Diameter0.28 inches (7.11 mm)
Base Diameter0.53 inches (13.46 mm)
Outside NozzleHeight0.9 inches (22.86 mm)
Top Diameter0.81 inches (20.57 mm)
Base Diameter1.03 inches (26.16 mm)
Diagram showing dimensions of the Contact Tip (Electrode)
Figure 3.1: Electrode (Contact Tip) Dimensions
Diagram showing dimensions of the Extend Tip
Figure 3.2: Extend Tip Dimensions
Diagram showing dimensions of the Outside Nozzle
Figure 3.3: Outside Nozzle Dimensions

4. Setup and Installation

Proper installation of consumables is crucial for safe and effective plasma cutting. Always ensure your plasma cutter is powered off and disconnected from the power source before handling any torch components.

  1. Disassemble the Torch Head: Carefully unscrew and remove the old or worn consumables from the plasma torch head.
  2. Install the Electrode: Insert a new Electrode (Contact Tip) into its designated slot within the torch head. Ensure it is seated firmly.
  3. Install the Extend Tip: Place the Extend Tip over the Electrode, ensuring it aligns correctly.
  4. Install the Outside Nozzle: Position the Outside Nozzle over the Extend Tip and screw it onto the torch head. Hand-tighten only; do not overtighten.
  5. Attach the Bracket: Secure the Bracket around the assembled nozzle and torch head, if applicable to your torch model, to hold the components in place.
Exploded view diagram showing the assembly order of plasma torch consumables
Figure 4.1: Plasma Torch Consumables Assembly Diagram

Always refer to your specific plasma cutter's user manual for detailed torch assembly instructions.

5. Operating Instructions

These consumables are designed for use with compatible plasma cutting torches. Once installed, operate your plasma cutter according to its manufacturer's instructions. Ensure proper air pressure, amperage settings, and cutting speed for the material thickness and type you are working with. Always wear appropriate personal protective equipment (PPE) including welding helmet, gloves, and protective clothing.

6. Maintenance

Regular inspection and timely replacement of consumables are essential for maintaining cut quality and extending the life of your plasma torch.

  • Inspection: Before each use, inspect the Electrode, Extend Tip, and Outside Nozzle for signs of wear, such as pitting, excessive erosion, or damage.
  • Replacement: Replace consumables when they show significant signs of wear. Worn electrodes can lead to unstable arcs, while worn tips and nozzles can result in poor cut quality, excessive dross, and reduced cutting speed.
  • Cleaning: Keep the torch head and consumables clean from slag and debris. Use a non-abrasive tool to gently clean the nozzle orifice if necessary.
  • Storage: Store unused consumables in a dry, clean environment to prevent contamination and corrosion.

7. Troubleshooting

Most issues related to plasma cutting performance can be traced back to worn or improperly installed consumables.

  • Poor Cut Quality / Excessive Dross: Check if the Extend Tip and Outside Nozzle are worn or damaged. Ensure they are correctly installed.
  • Unstable Arc / Difficulty Starting Arc: The Electrode may be severely worn. Replace the Electrode. Also, check for proper air pressure.
  • Short Consumable Life: Ensure your cutting parameters (amperage, speed, standoff distance) are appropriate for the material. Over-amperage or incorrect standoff can prematurely wear consumables.
  • Torch Overheating: Check for proper cooling (if applicable to your torch) and ensure consumables are not excessively worn, which can cause resistance and heat buildup.

If problems persist after checking and replacing consumables, consult your plasma cutter's main instruction manual or contact the plasma cutter manufacturer's support.

8. User Tips

  • Always verify the compatibility of these consumables with your specific plasma torch model before purchase and installation.
  • Keep a supply of spare consumables on hand to avoid interruptions during cutting tasks.
  • Regularly clean the torch components and ensure all connections are secure for consistent performance.

9. Warranty and Support

For any questions regarding the TOOLIOM Plasma Cutter Torch Consumables, please contact your retailer or the manufacturer's customer support. Information regarding specific warranty terms, if any, would typically be provided with your purchase documentation or on the product packaging.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.