RACBOX Side Mirror Turn Signal Blinker

Contents

RACBOX Car Rear View Mirror LED Turn Signal Light

Instruction Manual

1. Product Information

This product is an auxiliary accessory designed for car lighting, intended for normal replacement and upgrade of original lights. It complies with relevant national automotive lighting industry standards and has undergone strict quality testing.

Product Name: Side Mirror Turn Signal Blinker
Model: Side Mirror Turn Signal Blinker
Batch/Serial Number: 010-06

For a comprehensive guide, please refer to the official user manual PDF: View User Manual (PDF)

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

3. Setup Instructions

Follow these steps for proper installation of your LED Turn Signal Light:

  1. Carefully remove the rearview mirror cover or housing from your vehicle.
  2. Gently take out the original mirror side light from its housing.
  3. Connect the wiring plug of the new LED turn signal light to the vehicle's electrical connector.
  4. Install and firmly fix the new side light into its designated position within the mirror housing.
LED Turn Signal Light installed on a car's side mirror

Figure 1: LED Turn Signal Light installed on a car's side mirror, showing its integrated appearance.

View of the left LED Turn Signal Light

Figure 2: View of the left LED Turn Signal Light, showing its design.

4. Operating Instructions

After installation, perform a functional test:

  1. Turn on your vehicle's ignition and activate the turn signal to test the normal function of the newly installed light.
LED Turn Signal Light in operation

Figure 3: Car Rear View Mirror LED Turn Signal Indicator Light in operation, showing amber light.

LED Turn Signal Light emitting amber light

Figure 4: The LED Turn Signal Light emitting amber light in darkness.

5. Maintenance

The LED Turn Signal Light is designed for durability and requires minimal maintenance. To ensure optimal performance and appearance:

  • Periodically clean the lens with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners.
  • Inspect wiring connections annually to ensure they remain secure.

6. Troubleshooting

If the LED Turn Signal Light does not function as expected after installation, consider the following:

  • Light does not turn on: If the light fails to illuminate, reverse the plug polarity. This often resolves issues with LED lights that are sensitive to current direction.
  • Intermittent operation: Check all wiring connections to ensure they are secure and free from corrosion.
  • Dim lighting: Ensure the vehicle's electrical system is providing adequate voltage.

7. Specifications

FeatureDetail
Item TypeSide Mirror Signal Blinker
Model NameCar LED Side Mirror Turn Signal Light
MaterialABS
Fitment TypeDirect Replacement
Light SourceLED
Light ColorAmber
Voltage12V
Power0.5W
Dimensions (L x W)102mm x 52mm
FitmentFor 2019-2022 Toyota Corolla (Excluding 2019 Sedan)
Dimensions of the LED Turn Signal Light

Figure 5: Dimensions of the LED Turn Signal Light: 102mm length, 52mm width.

Rear view of the LED Turn Signal Light with specifications

Figure 6: Rear view of the LED Turn Signal Light showing the connector and electrical specifications: 12V 0.5W.

8. User Tips

  • Always test the light before fully reassembling the mirror housing to ensure proper function and polarity.
  • When connecting, if the light does not illuminate, try reversing the plug to account for polarity sensitivity common in LED components.

9. Warranty & Support

RACBOX Warranty Information

RACBOX warrants to the end-user that this product shall materially conform to RACBOX's published specifications in the user manual, subject to the terms and conditions below.

Standard Warranty

The Warranty Period for a new Product is One Year (12 Months) from the date a new product is first delivered to the End-User after being purchased.

What is Covered

The Standard Warranty provides support from Racbox, including replacement parts and shipping costs during the Warranty Period. Customers are covered for replacements, partial refunds, or full refunds for any product due to manufacturing defects of components or workmanship.

What is Not Covered

The warranty does not cover any damage due to abuse, wrong installation, neglect or misuse, extreme environment, unusual physical or electrical stress or interference, exposure to flooding, fire, or electrical problems associated with incoming power or other acts not the fault of Racbox. The warranty does not cover accessory parts. Racbox is not responsible for damage arising from end-user error or failure to follow instructions relating to the product's use.

How to Get Warranty Service

If you have any questions or need to request a replacement part, please feel free to contact our customer support, either by phone, email, or through our Live Support system.

RACBOX Warranty details

Figure 7: RACBOX Warranty information, detailing standard warranty and warranty period.

RACBOX Warranty coverage details

Figure 8: RACBOX Warranty details, outlining what is covered, what is not covered, and how to get warranty service.

Manufacturer & EU Representative Information

Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou, tdlaccount@126.com

EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND, info@apex-ce.com

© 2023 RACBOX. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.