1. Product Overview
The LS VISION 4K AOV Solar Security Camera (Model LS-CS100) is an advanced outdoor surveillance solution featuring 4K Ultra HD resolution, 10X digital zoom, and 24/7 recording capabilities. Powered by a solar panel and equipped with a 10000mAh battery, it offers continuous operation with both WiFi and 4G connectivity options. Key features include Human Auto Tracking, three-screen display modes, two-way voice intercom, and IP66 waterproof rating, all managed through the iCSee mobile application.

Figure 1: LS VISION 4K AOV Solar Security Camera with key features highlighted.
Video 1: Unboxing and feature demonstration of the AOV Solar Camera.
2. Package Contents
Please check the box for the following items:
- LS VISION AOV Solar Security Camera
- Solar Panel
- Solar Panel Bracket
- USB Charging Cable
- Mounting Screws and Wall Plugs
- User Manual (this document)
- Tweezers (for SIM/SD card handling)
- Wall Mount Plate
3. Product Introduction (Components)
Familiarize yourself with the camera's components:

Figure 2: Diagram illustrating the camera's main components.
- Solar Panel: Provides power to the camera battery.
- Antenna: For WiFi or 4G signal reception.
- Dual Light: Includes IR LEDs for night vision and White LEDs for color night vision/spotlight.
- Fix Lens: Upper fixed lens for wide-angle view.
- IR Led: Infrared LEDs for black and white night vision.
- Zoom Len: Lower PTZ lens with 10X digital zoom capability.
- Microphone: For audio input during two-way intercom.
- White Led: White light LEDs for illumination and color night vision.
- 5V TYPE-C Charging Port: For charging the camera battery.
- Power On/Off Switch: To turn the camera on or off.
- TF Slot Cover: Protects the TF (MicroSD) card slot.
- Speaker: For audio output during two-way intercom and alarms.
- Reset Button: Located next to the card slot, used to reset the camera to factory settings.
Important Notes:
- Remove the cover to replace the TF card.
- Do not replace the 4G card without proper guidance.
- To reset the camera, press and hold the reset button for 8 seconds until you hear a factory reset prompt.
4. Setup
4.1 APP Download
The camera operates with the iCSee mobile application.
- Method 1 (App Store): Search for "iCSee" in the Apple App Store (for iOS devices) or Google Play Store (for Android devices) and download the application.
- Method 2 (QR Code Scan): Use your phone's browser or WeChat scan function to scan the QR code provided in the manual (or on the product packaging) to directly download the "iCSee" app.
Account Registration
After downloading the app:
- Open the iCSee app.
- Click on the registration icon.
- Select your country.
- Enter your mobile phone number or email address to register.
- Note: Email verification information may sometimes be marked as spam. Please check your spam folder if you do not receive the verification email.
4.2 Add Camera to APP
Follow these steps to add your camera to the iCSee app:
- Ensure your mobile phone's network connection is stable and normal.
- Turn the camera's power switch to the "ON" position. Wait for the device to announce "network connection successful".
- In the iCSee app, click the "+" button to add a device.
- Select "4G Camera".
- Follow the voice prompts from the camera and the instructions on the app interface to scan the QR code located on the camera's label.
- Proceed to the next step to add the device.
- After scanning, a device name modification prompt will appear. Edit the device name as desired and click "OK" to successfully add the camera.
- Data Package Activation: The preview function requires an activated data package. If not activated, click the "Traffic" indicator within the app to purchase and activate it.
4.3 Network Connection Failure Analysis
If you encounter issues pairing the camera, consider the following:
- Reset Camera: Remove the TF card cover, then press and hold the reset button (next to the card slot) for 8 seconds until you hear a factory reset prompt. The device will restart, then attempt to add it to the network again.
- Signal Strength: Ensure the camera is installed in an area with a strong 4G signal for optimal performance.
- Environmental Interference: Avoid installing the camera near sources of strong magnetism, such as high-voltage power towers, which can affect 4G signals.
- Persistent Issues: If network connection problems persist, the camera may have a fault. Please contact customer support for assistance.
4.4 Camera Installation
Proper installation ensures optimal performance and durability:
- Fix two brackets securely to the wall.
- Install the solar panel onto one bracket and connect its charging cable to the camera.
- Solar Panel Placement Note: Install the solar panel in a location that receives direct sunlight for an extended period throughout the day.
- Install the camera to a suitable location using the other bracket.
- Plug the solar panel's charging cable into the camera's charging port.
- Water Ingress Prevention: Ensure the silicone plug on the charging port is properly installed to prevent water ingress.
- Recommended Height: The recommended installation height for the camera is approximately 4-5 meters.
- Charging Verification: After connecting the charging cables, check the iCSee app. If a lightning sign appears on the battery icon, the camera is charging normally.
4.5 Solar Panel Installation Suggestions
To maximize solar charging efficiency:
- Install the solar panel in a location that receives the most direct sunlight throughout the year.
- The solar panel requires several hours of direct sunlight daily to provide sufficient power to the camera.
- Be aware that the energy supply from the solar panel can be affected by weather conditions (e.g., cloudy days), seasonal changes, and geographical location.
4.6 Device Wake-up Introduction
Understanding device wake-up behavior is crucial for effective monitoring:
- Installation Height: The camera should be installed at a height of about 4-5 meters.
- Angle Adjustment: The camera angle can be adjusted using the real-time picture in the iCSee app. A smaller zoom setting will result in a larger detectable wake-up vision, and vice versa.
- Optimal Angle: Adjust the camera angle slightly downwards for better detection.
- False Alarms: If the device experiences a high rate of false alarms, reduce the sensitivity of human figure detection in the app settings.
- Detection Distance: The best awakening distance for AOV (Always On Video) is within 20 meters when using a small zoom setting. This distance will vary with different zoom levels.
5. Operating the Camera
5.1 APP Interface Introduction
The iCSee app provides various functions for controlling and monitoring your camera:
- Battery Display: Shows the current battery level.
- 4G Signal: Indicates the strength of the 4G network signal.
- Fix Len Vision: Displays the view from the fixed lens.
- Zoom Len Vision: Displays the view from the zoom lens.
- Real-time: Live view of the camera feed.
- Playback: Access recorded footage.
- Message: View alarm notifications and system messages.
- Cloud Storage: Manage and access cloud-stored recordings.
- AI: Artificial Intelligence features (e.g., human detection).
- Favorites: Save preferred camera positions for quick access.
- Motion Tracking: Enable/disable and configure motion tracking.
- Sort: Organize your devices.
- PTZ (Pan/Tilt/Zoom): Control camera movement and zoom.
- Strobe Light and Audio ALARM: Activate visual and audible alarms.
- SD Card Album: Access recordings stored on the MicroSD card.
- PTZ Reverse: Reverse PTZ controls if needed.
5.2 Light Mode Introduction
To configure the camera's lighting and alert functions:
- Click on "Strobe Light and Audio Alarm" within the app interface to open the settings.
- Here you can adjust the "White light switch" (Auto/Off/Time), enable the "Smart Alert Switch", and configure "Alarm Time Settings".
5.3 PTZ and Favorites Function
Control your camera's view and save preferred positions:
- PTZ Control: In the real-time interface, click "PTZ" to access controls for zooming in/out and focusing. Use the direction keys to rotate the camera up, down, left, and right.
- Favorite Location: You can save specific camera positions as "Favorite Locations". Once saved, you can quickly recall these positions by clicking on them, allowing the camera to automatically move to the desired monitoring area.
5.4 Motion Tracking Function Setting
Enable the camera to automatically follow detected motion:
- Click on "Motion Tracking" in the app. The mobile tracking setting interface will appear.
- Turn on the mobile tracking function.
- You can set a preset position for the camera. Rotate the camera to your desired starting position and then set it as the preset.
- Sensitivity Note: It is recommended to use "Medium" or "Low" for tracking sensitivity. Using "High" sensitivity may lead to an increased number of false alarms.
5.5 Playback Function
Review recorded footage from your camera:
- Click "Playback" to view recordings stored on the cloud or the TF card.
- Fast Forward/Rewind: The app supports fast forward and rewind functions, typically up to Max+4X/-4X speed.
- SD Card Management: Access "Settings" > "SD card settings" to check the MicroSD card's capacity and format it if necessary.
- Alarm Messages: The app provides intelligent alarm message pushes. You can view corresponding alarm events directly from these messages.
5.6 Smart Alarm Function
Configure intelligent detection and alarm triggers:
- Intelligent Detection: Navigate to "Settings" > "Smart Alarm" > "Intelligent Detection". Here you can set the sensitivity of detection, enable/disable the display of intelligent trajectories, define warning areas, and set the alarm period.
- Alarm Linkage: Go to "Settings" > "Smart Alarm" > "Alarm Linkage". This section allows you to configure audio alarms, set the sound duration, adjust the volume, and choose a device ringtone for alerts.
- Trigger Condition: The smart alarm functions are primarily triggered when the monitoring system detects a human figure.
5.7 AOV Frame Rate Introduction
The camera offers different AOV (Always On Video) frame rate modes:
- Power Saving Mode: AOV frame rate of 1/2fps (one picture every 2 seconds).
- Performance Mode: AOV frame rate of 1fps (one picture per second).
- Custom Mode: Allows you to set various frame rates including 1fps, 1/2fps, 1/3fps, 1/5fps, 1/10fps, 1/20fps, 1/30fps, and 1/60fps. The minimum frame rate is 1/60fps, meaning one picture is captured every 60 seconds.
6. Maintenance
To ensure the longevity and optimal performance of your LS VISION Solar Security Camera, follow these maintenance guidelines:
- Solar Panel Cleaning: Regularly clean the surface of the solar panel to remove dust, dirt, and debris. A clean panel ensures maximum sunlight absorption and efficient charging.
- Battery Monitoring: Periodically check the battery status via the iCSee app. While solar-powered, extreme weather or prolonged low light conditions might affect battery levels.
- Waterproof Seal Integrity: Ensure all covers and plugs, especially the silicone plug on the charging port, are securely in place to maintain the IP66 waterproof rating and prevent moisture damage.
- Firmware Updates: Check the iCSee app regularly for any available firmware updates. Updates often include performance improvements, bug fixes, and new features.
- Lens Cleaning: Gently clean the camera lenses with a soft, lint-free cloth to ensure clear image quality. Avoid abrasive materials or harsh chemicals.
7. Troubleshooting
If you encounter issues with your camera, refer to the following common problems and solutions:
- Cannot watch camera images after adding device:
Check if the 4G signal is normal. If the signal is weak, install the camera in a location with a stronger 4G signal. - Cannot receive push messages after the camera is connected to the APP:
Verify that the iCSee application is set to push notification mode. Also, check your phone's operating system settings to ensure notification permissions are enabled for the iCSee app. - Cannot add camera after the device is turned on:
Remove the TF card cover on the back of the camera. Press and hold the reset button (next to the card slot) for 8 seconds until you hear a factory reset prompt. Wait for the device to restart, then attempt to add it to the network again. - How does the camera store videos?
The camera supports TF (MicroSD) cards up to 512GB. When the storage is full, older videos will be automatically deleted for loop recording. For alarm recordings and real-time push of alarm short videos, cloud storage is recommended for safety and reliability. You can access cloud services through the iCSee app. - Network Connection Issues:
Ensure the camera is not installed in areas with strong electromagnetic interference, such as near high-voltage power lines, which can disrupt 4G signals.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | LS VISION |
| Model Number | LS-CS100 |
| Power Supply | Solar Powered |
| Connectivity | WIFI, 4G |
| Sensor | CMOS, 1/2.7" Sensor Size |
| Lens (mm) | 4mm |
| Focal Length | 2.8mm |
| Viewing Angle | 360° |
| Installation | Side, Ceiling, Normal |
| Technology | INFRARed, Pan / Tilt / Zoom |
| Audio Output | 1CH BNC |
| Supported Mobile Systems | IOS, Android |
| APP | ICsee |
| Alarm Type | Local Alarm |
| Smart Home Platform | Alexa, Google Assistant |
| Key Features | Three Screens Dual Lens AOV Solar Camera, 10X digital zoom, 4G SIM/ WiFi Solar Camera, 8MP 4K CCTV Cameras, 10000mAh Battery, Detection distance 20 meters, 24 hours video recording, Human Auto Tracking, Pre Set Position Settings, 9W Solar Panel, Cloud Storage Supported, IP66 Waterproof |
9. User Tips
- 4G SIM Card Compatibility: If using the 4G version, ensure your SIM card is compatible with the camera's network bands in your region. The 4G version supports various SIM cards, but local network compatibility is key for proper function.
- Optimal Solar Charging: Angle the solar panel directly towards the sun's path to maximize charging efficiency, especially during winter months or in regions with less direct sunlight.
- Regular App Checks: Periodically open the iCSee app to check camera status, battery levels, and review event logs, even if you rely on push notifications.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official documentation provided with your product or visit the LS VISION website. You can also find additional guides and documents, including a PDF user manual, by checking the product page where you purchased the camera.
For further assistance, please contact LS VISION customer support.