AISLPC R36Max Handheld Game Console User Manual

1. Introduction

The AISLPC R36Max is a portable retro handheld game console designed for an immersive gaming experience. It features a 4-inch IPS screen, runs on a Linux operating system, and supports a wide range of classic game emulators. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your R36Max console.

2. Safety Information

• Keep the device away from water and moisture.
• Avoid exposing the device to extreme temperatures.
• Do not attempt to disassemble or repair the device yourself.
• Use only the provided charging cable and a compatible 5V 1.5-2A charger.
• Keep out of reach of small children due to small parts.

3. Package Contents

Ensure all items are present in your package:

• Handheld game console (x1)
• Type-C data cable (x1)
• Case (x1)
• Instruction manual (x1)
• Screen protector (x1)

4. Product Overview

Familiarize yourself with the console's layout and controls:

Controls and Ports:

• Power Button: Turns the console on/off.
• Reset Button: Resets the console.
• Volume Keys (+/-): Adjusts the audio volume.
• TF-(game) Slot: MicroSD card slot for game storage.
• TF1-OS Slot: MicroSD card slot for the operating system.
• BOX Audio Hole: Speaker output.
• Direction Pad: For directional input in games and menus.
• (FN) Button: Function button, often used in combination with other keys.
• Select Button: Game/system select button.
• Start Button: Game/system start button.
• Left Rocker / Right Rocker: Analog joysticks for precise control.
• A, B, X, Y Buttons: Action buttons.
• Charging Port (Type-C): For charging the device.
• OTC Headset Port: 3.5mm audio jack for headphones.
• R1, R2, L1, L2 Buttons: Shoulder buttons for additional game controls.

5. Specifications

6. Setup

6.1 Initial Power On

1. Ensure the console is sufficiently charged. If the red light is on, charge the device first.
2. Press and hold the Power Button for five seconds.
3. Wait approximately 20 seconds for the system to boot up and enter the operation interface.

6.2 Charging Instructions

• When the red light on the main engine is on, please charge the device promptly.
• Connect the charging cable to the Type-C charging port.
• The red light will automatically turn off when fully charged.
• Important: Do not press the reset button during charging. The charger must not exceed 5V2A.

6.3 Adding Games

To add new games to your console:

1. Remove the TF card (game) from the console and insert it into your computer.
2. Locate the disk named "EEROMS" on your computer.
3. Place the downloaded game ROMs into the corresponding emulator folder within the "EEROMS" disk.
4. If you have game images (e.g., box art), place them into the media/screenshot folder.
5. Find the file named game list.xml. You can open it with Notepad to simulate existing game information, add the newly added game to the list, and then save it.
6. Safely eject the TF card from your computer and reinsert it into the console.
7. Start the console, and the newly added games should appear in your game list.
8. Troubleshooting Tip: If your computer does not show the "EEROMS" disk, go to "This Computer" (or "My Computer"), right-click, select "Manage", then "Disk Management". Scroll down to find the TF card, right-click it, and assign it a drive letter.

7. Operating Instructions

7.1 Power On/Off

• Power On: Press and hold the Power Button for five seconds.
• Shut Down: Press and hold the Power Button for seven seconds to display the shutdown menu. Select "Shutdown Program" and press A to confirm.
• Attention: Always exit the game before shutting down.

7.2 Function Shortcut Key Combinations

• Fix System Bug: Hold down the Left Joystick + L2 + Y keys simultaneously for 3 times.

7.3 In-Game Shortcut Combinations (Except PSP, NDS)

• Save Game Progress: SELECT + R1
• Load Saved Game Progress: SELECT + L1
• Exit Game: SELECT + START
• Display FPS: SELECT + B
• Pause Game: SELECT + A
• RA Menu: SELECT + X

7.4 PSP Game Button Instructions

• PSP Menu: SELECT + B
• PSP Save Game: Press SELECT + B to enter the PSP menu. Then navigate to 1. settings > 2. system > 3. Auto load savestate > 4. slot 1 > 5. Back > 6. save state save successful > 7. Exit to menu exit > 8. Exit exit menu.

7.5 NDS Game Button Description

• Switch Screen Display: Press R2.
• Display Full Screen: Press the Right Joystick.
• Enter Game's Backstage Menu: Press the Left Joystick.

7.6 System Settings

• Unlock Child Mode: Press START, select "UNLOCK USER INTERFACE MODE", press A, and then press A, A, A, B, A to unlock.
• Adjust Screen Brightness: Press the START key to open the selection menu, select "System Settings", press A to enter. Select "Brightness". Use the Left key of the cross key to reduce brightness, and the Right key to increase brightness.
• Switch Language: Press START to open the selection menu, select "System Settings", then "Language", press A to enter. Select your desired language, press A to confirm. Changing the language requires a restart. After selecting, return to the previous menu, select the exit option, and choose "RESTART EMULATIONSTATION".
• Change Theme: Press START to open the selection menu, select "User Interface Settings", press A to enter "Settings", then "Background Theme". Switch to your favorite theme.
• Game Display Scale:
  1. Press START to open the selection menu, select "Game Settings", press A to enter. Pull down to select the game screen ratio, and select the appropriate screen ratio.
  2. X/Y Select: Select based on the screen resolution. For example, 720x720 is a 1:1 ratio. If "Game Display Ratio" is set to 1:1, most games will display full screen (some games may still have black edges).
  3. CORE PROVIDEO: This option uses the default resolution of the emulator core, ensuring the game screen is displayed according to its original scale without deformation. This is especially useful for arcade vertical shooting games to prevent stretching.
• Add Game to Favorites List: Select the game you want to add in the game list, press and hold the A button. A menu will pop up. Select "Add to Favorites", press the A button to confirm. The selected game will be added to the favorites list.

7.7 Emulator Core Management

• Switch Emulator Core: If a game fails to run, it might be due to an unsupported emulator core. Select the game name with the error in the game list, press and hold the A key, select "Advanced Game Options", and try changing the first item "Simulator" to a different core.
• Core Selection Suggestions:
  • CPS1, 2, 3: Prioritize FBAlpha2012 core, followed by FBNeo core and other FBA cores.
  • FBNeo: Prioritize FBNeo core, followed by FBAlpha2012 and other FBA cores.
  • MAME: Prioritize FBNeo core, followed by MAME2010, and then other cores.
  • GBA: MGBA supports key combinations, and GPSP supports game modifications.
• Set Side B in FDS Game: Some FDS games require setting up side B before starting. If prompted, press L1 to set side B, and the game should load normally.

8. User Tips

• The R36Max is praised for its clear screen, smooth controls, and portability, making it ideal for retro gaming on the go.
• Many users appreciate its intuitive user interface and simple setup.
• The console is small enough to fit comfortably in a backpack or coat pocket.
• The device supports a wide variety of classic games and emulators, offering a rich gaming library.

9. Maintenance

• Cleaning: Use a soft, dry cloth to clean the console. Do not use liquid cleaners or abrasive materials.
• Storage: Store the console in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.

10. Troubleshooting

10.1 Common Issues and Solutions

• Console does not power on:
  • Ensure the battery is charged. Connect the console to a power source and allow it to charge for at least 30 minutes before attempting to power on again.
  • Verify the power button is pressed and held for the required 5 seconds.
• Games do not appear in the list after adding:
  • Double-check that the game ROMs are placed in the correct emulator folders on the TF card.
  • Ensure the game list.xml file is correctly updated and saved after adding new games.
  • Verify the TF card is properly inserted and recognized by the console.
• Game does not run or crashes:
  • Try switching the emulator core for the specific game (refer to Section 7.7).
  • Ensure the game ROM is not corrupted. Try downloading a different version of the ROM.
  • Some games may have compatibility issues with certain emulators.
• "WE CAN'T FIND ANY SYSTEMS!" error message:

  

  • This error typically indicates that the system cannot locate the necessary configuration files or game directories.
  • Check that your TF card (OS card) is correctly inserted and not corrupted.
  • Verify that the system configuration file and game directories are correct. You may need to re-flash the OS or ensure the game TF card is properly formatted and contains the necessary system files.
  • Visit emulationstation.org for more information on system setup.
• Screen stopped working / Console unresponsive:
  • Attempt a hard reset by pressing the Reset Button.
  • If the issue persists, contact customer support for further assistance.

11. Frequently Asked Questions (FAQ)

Q: Does this console support Game Boy (GB) and Game Boy Color (GBC) games?

A: Yes, the R36Max supports multiple emulators, including GBA (Game Boy Advance), which is compatible with GB and GBC games.

Q: Can the console be connected to a television via HDMI?

A: Based on the specifications and available information, the R36Max does not feature an HDMI output port for connecting to a television.

12. Warranty and Support

For any issues not covered in this manual or for technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.

A user manual in PDF format is available for download. You can reference it at: User Manual (PDF)