AMBITFUL SA30

Contents

AMBITFUL SA30 Air Light Honeycomb Grid Softbox User Manual

Model: SA30

1. Introduction

The AMBITFUL SA30 Air Light Honeycomb Grid Softbox is a light modifier designed to provide precise control over the lighting effect for photography and video recording. It is specifically designed for use with the AMBITFUL GC30R inflatable tube light, enhancing light direction and reducing spill. Its lightweight and portable design makes it suitable for various shooting scenarios, from studio portraits to outdoor live streaming.

AMBITFUL SA30 Honeycomb Grid Softbox and storage bag
AMBITFUL SA30 Honeycomb Grid Softbox and included storage bag.

2. Safety Warnings

2.1 General Safety

  • Do not use this product in wet environments or rain to avoid short circuits and electrical hazards.
  • Do not disassemble the product. There are no user-serviceable parts inside. Disassembly may cause damage to the device or personal injury.
  • Keep the product away from high-temperature heat sources (e.g., radiators, direct sunlight) to prevent material deformation or aging.
  • When children use the product, adult supervision is required to prevent accidental ingestion of small parts or improper installation/operation that could lead to damage.

2.2 Specific Safety

  • Ensure the light source (e.g., AMBITFUL GC30R) is powered off before installing or removing the grid.
  • The grid is made of fabric. Avoid collisions or scratches.
  • Do not use corrosive cleaning agents on the fabric.
  • Keep the product out of reach of infants and young children. Small parts may pose a choking hazard.

3. Setup and Installation

Follow these steps to install the SA30 Honeycomb Grid onto your compatible tube light (e.g., AMBITFUL GC30R):

  1. Remove the stowed fabric grid from its storage bag.
  2. Expand the fabric grid to its full length.
  3. Peel off the Velcro fasteners on the grid.
  4. Carefully insert your inflatable tube light into the grid.
  5. Securely attach the Velcro fasteners around the tube light to hold the grid in place.
  6. Ensure the grid is firmly attached and aligned with the light.
Step-by-step installation guide for the fabric grid onto a tube light
Installation steps for the AMBITFUL SA30 Honeycomb Grid.
Video demonstrating the installation and light effect of the SA30 Honeycomb Grid.

4. Operating Instructions

The SA30 Honeycomb Grid is designed to modify the light output of your tube light, providing precise control over the lighting effect. Once installed, the grid helps to:

  • Control Light Direction: The honeycomb structure narrows the beam angle, directing light more precisely onto your subject and reducing light spill.
  • Enhance Contrast: By controlling the light, the grid helps create more defined shadows and highlights, leading to increased contrast and a more dramatic look.
  • Create Ambiance: Achieve specific lighting moods and ambiances for your shots by shaping the light.
Model with two tube lights, one with grid, one without, demonstrating precise light control
Demonstration of precise light control with the fabric grid.
Side-by-side comparison of bare light versus light with the grid, showing controlled light direction
Effect comparison: Bare light vs. light with grid, showing enhanced light direction.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to gently wipe the fabric grid. Do not use abrasive materials or corrosive cleaning agents, as these can damage the fabric and reflective texture.
  • Storage: When not in use, fold the grid and store it in the provided storage bag. This protects the fabric and reflective surfaces from dust and damage. The lightweight and portable design allows for easy, space-saving storage.
  • Environmental Conditions: Avoid prolonged use or storage in environments with high temperatures (above 60°C) or high humidity (above 85% relative humidity) to prevent material degradation.
  • Inspection: Regularly inspect the Velcro fasteners and fabric for any signs of wear or damage.
Close-up of the fabric and stitching of the grid, highlighting quality materials
Quality fabrics ensure durability and prevent light leakage.
Image showing the grid folded for storage, emphasizing portability
The grid is lightweight and portable, folding easily for storage.

6. Troubleshooting

  • Light Spill is Excessive:
    • Ensure the grid is fully expanded and properly aligned with the tube light.
    • Check that the Velcro fasteners are securely attached along the entire length of the grid.
  • Grid Not Attaching Securely:
    • Verify that the Velcro strips are clean and free from debris.
    • Ensure the tube light is compatible with the SA30 grid's dimensions.
  • Product Damage or Malfunction:
    • If the product is damaged or malfunctions, please contact an authorized dealer or after-sales service. Do not attempt to repair or replace parts yourself.

7. Specifications

Feature Detail
Brand AMBITFUL
Model Number SA30
Compatibility AMBITFUL GC30R Inflatable Tube Light (and similar sized tube lights)
Dimensions (L x W x D) 86cm x 9cm x 11.5cm (approx.)
Weight ~280g
Material Quality Fabric with reflective texture
Attachment Method Velcro Straps
Origin Mainland China
Dimensions of the SA30 Honeycomb Grid
Approximate dimensions and weight of the SA30 Honeycomb Grid.

8. Warranty and Support

This product is intended for auxiliary photography use only. Any unauthorized modification or misuse may void compliance and warranty.

If the product is damaged or malfunctions, please contact your authorized AMBITFUL dealer or after-sales service for assistance. Do not attempt to repair or replace parts yourself, as this may cause further damage or void the warranty.

For additional guides and documents, you may refer to the official user manual PDF if available from the seller.

9. User Tips

  • Versatile Positioning: The elastic straps at the ends of the fabric grid can be used for tying or securing the grid in various positions, offering more application possibilities beyond just attaching it to the light.
  • Optimized Light Control: The internal orange peel texture is a high-quality reflective surface designed to control the direction of light more accurately, ensuring your light is precisely where you need it.
  • Quick Setup: The Velcro strap design allows for quick and convenient installation, saving time and effort during your shoots.
  • Portability: Always fold the grid neatly and store it in its bag when transporting to maintain its shape and protect the fabric.
Close-up of the elastic strap on the fabric grid
Elastic straps provide additional tying and storage options.
Close-up of the Inside Orange Peel Texture for light control
The internal orange peel texture helps control light direction accurately.

10. Frequently Asked Questions (FAQ)

Q: What is the primary purpose of the honeycomb grid?
A: The honeycomb grid is designed to narrow the beam of light from your tube light, providing more precise control over the light direction and reducing unwanted light spill.
Q: Is the SA30 grid compatible with other brands of tube lights?
A: While specifically designed for the AMBITFUL GC30R, it may be compatible with other tube lights of similar dimensions (approximately 86cm length and 9-11.5cm width/depth). Always check the dimensions of your light before purchase.
Q: How do I clean the fabric grid?
A: Gently wipe the fabric with a soft, dry cloth. Avoid using any harsh chemicals, solvents, or abrasive materials that could damage the fabric or the reflective inner surface.
Q: Can I leave the grid attached to the light permanently?
A: While it can remain attached, for best longevity and to prevent dust accumulation, it's recommended to remove, fold, and store the grid in its bag when the light is not in active use or being transported.

11. Compliance Information

This product complies with relevant EU regulations. The CE mark, with a vertical height of no less than 5mm, indicates conformity with EU Regulation (EC) No 765/2008. The WEEE symbol on the product and packaging indicates that the product is subject to separate collection for recycling, in accordance with the EU Waste Electrical and Electronic Equipment Directive.

This product is intended solely for auxiliary photography purposes. Any use outside of its intended purpose or unauthorized modifications may lead to non-compliance with regulations.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.