BQCC 9.36" Car DVR Rearview Mirror

Introduction

Thank you for choosing the BQCC 9.36" Car DVR Rearview Mirror. This device integrates a high-definition dash camera, a large touch screen display, and smart connectivity features like Apple CarPlay, Android Auto, Bluetooth, and Mirrorlink, all within a convenient rearview mirror form factor. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure you get the most out of your device.

BQCC 9.36" Car DVR Rearview Mirror with Carplay interface

Package Contents

Please check the package for the following items:

• BQCC 9.36" Car DVR Rearview Mirror (Main Unit)
• Rear Camera (Optional, may vary by package)
• Car Charger (Dual USB)
• USB Power Cable (Type-A to Type-C)
• AUX Cable
• Rubber Bands for Installation
• User's Manual

Contents of the product package.

Setup & Installation

1. Mounting the Rearview Mirror DVR

1. Place the BQCC DVR unit over your existing rearview mirror.
2. Use the provided rubber bands to securely fasten the DVR to your original rearview mirror. Ensure it is stable and does not obstruct your view.

2. Power Supply Connection

This device is powered by 5V USB. After the device is installed, insert the USB plug into the cigarette lighter car charger to start it up and use it.

1. Connect the USB Type-C end of the power cable to the DVR unit.
2. Plug the USB Type-A end of the power cable into the provided dual USB car charger.
3. Insert the car charger into your vehicle's cigarette lighter socket.

Power supply connection diagram (refer to the cables on the right).

3. TF Card Insertion (for Driving Recorder)

The dash cam has a built-in camera. When a TF card is inserted, it will start recording and automatically save the video to the TF card.

• Insert a compatible TF (MicroSD) card (8GB or 16GB recommended, FAT32 format) into the designated TF card slot on the DVR unit.
• Note: The TF card is only used for storage and playback of driving recorder footage. Music playing software cannot read this card slot.

4. Reversing Camera Connection (Optional)

The reversing video input can be connected via an RCA adapter cable. When there is a signal at this port, the display will automatically pop up the reversing camera image.

1. Connect the rear camera's video cable (RCA connector) to the AV IN port on the DVR unit.
2. Connect the red wire of the rear camera's power cable to the positive terminal of your car's reverse lights.
3. Connect the black wire of the rear camera's power cable to a suitable ground point on your car chassis.

Reversing camera connection diagram (refer to the camera and yellow cable).

Operating Instructions

1. Driving Recorder (Dash Cam) Function

Once powered on and a TF card is inserted, the device will automatically start recording. The footage will be saved to the TF card. You can access recorded videos through the playback function on the device.

2. Apple CarPlay (Wireless)

CarPlay turns the player's screen into the second screen of the iPhone, and the phone can be controlled on both screens.

1. First, turn on the Bluetooth and Wi-Fi functions on your iPhone.
2. Connect to the device's Bluetooth (PIN: 0000).
3. The device will automatically enter the CarPlay interface.

Note: The signal is transmitted via Wi-Fi. Even if Bluetooth is turned off, it will transmit normally. To disconnect from CarPlay, disconnect the Wi-Fi connection in the WLAN interface.

Wireless CarPlay connection.

3. Android Auto (Wireless)

This feature allows your Android phone to connect wirelessly for navigation, music, and more.

1. First, turn on the Bluetooth and Wi-Fi functions on your Android phone.
2. Connect to the device's Bluetooth (PIN: 0000).
3. The device will automatically enter the Android Auto interface.

Note: The signal is transmitted via Wi-Fi. Even if Bluetooth is turned off, it will transmit normally. To disconnect from Android Auto, disconnect the Wi-Fi connection in the WLAN interface.

Wireless Android Auto connection.

4. Mirrorlink (Android Wireless)

Android Mirrorlink supports transferring video, audio, and picture from your Android Phone to the car player via Bluetooth and Wi-Fi function.

1. Scan the QR code (if provided on screen) to download the Mirrorlink APK.
2. Install and open the APK on your Android phone.
3. Enable the floating window permission for the APK on your phone.
4. Use your phone's Bluetooth to connect to the device (name: SWL-BT, PIN: 0000).
5. Enter your phone's WLAN interface - Advanced Settings - WLAN Direct Connection.
6. Choose the Wi-Fi signal named