1. Introduction
This manual provides comprehensive instructions for the RACBOX LED Rear Bumper Reflector Tail Light. It is designed to assist you with the safe installation, operation, and maintenance of your new automotive part. Please read this manual thoroughly before installation and retain it for future reference.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture unnecessarily.
3. Product Overview
Features
- Direct replacement for original parts.
- Simple installation process.
- Constructed from high-quality ABS material for durability and long service life.
- Designed with good sealing to prevent water leaks and condensation.
- Manufactured to perfectly match your vehicle's original specifications.
Note: This product is a reflective light case and does not contain an internal light source.
Product Video
Watch this video for a visual overview of the product and its fitment.
Video: Overview of the LED Rear Bumper Reflector Tail Light and its application.
Package Contents
Depending on your selection, the package may include:
- 1pc Left Rear Bumper Reflector
- OR 1pc Right Rear Bumper Reflector
- OR 2pcs Rear Bumper Reflector (Left & Right)
Image: Example of a single reflector as included in the package.
4. Specifications
| Attribute | Detail |
|---|---|
| Material | ABS (Acrylonitrile Butadiene Styrene) and PMMA (Polymethyl Methacrylate) |
| Part Numbers | 9068260140, MB1185109, 9068260040, MB1184109 |
| Lens Color | Red |
| Placement on Vehicle | Rear Bumper |
| Dimensions (approx.) | Length: 18cm (7.08in), Height: 6.5cm (2.55in) |
| Fitment |
|
Image: Product dimensions.
Image: Front and back view of the reflector, indicating materials (PMMA, ABS) and part numbers.
5. Installation
General Installation Guide
- Ensure the vehicle is turned off and parked safely.
- Carefully remove the original reflector from the vehicle's rear bumper. This typically involves unlatching clips or unscrewing fasteners.
- Align the new RACBOX LED Rear Bumper Reflector with the mounting points on the bumper.
- Press firmly or secure with original fasteners until the new reflector is properly seated and locked into place.
- Verify that the reflector is securely attached and does not wobble.
Note: This product is designed for direct replacement. If you are unsure about the installation process, it is recommended to seek professional assistance to avoid damage to the product or your vehicle.
Image: The reflector set ready for installation.
Image: Location of the rear bumper reflectors on a Mercedes-Benz Sprinter.
Image: Indicating left and right reflector positions on the vehicle.
Image: Close-up views of the reflector installed on a Sprinter.
6. Operation
The RACBOX Rear Bumper Reflector is a passive safety device. It operates by reflecting light from other vehicles' headlights, increasing your vehicle's visibility, especially in low-light conditions or adverse weather. No active power source or user interaction is required for its operation once correctly installed.
7. Maintenance
To ensure optimal performance and longevity of your reflector, follow these simple maintenance guidelines:
- Cleaning: Regularly clean the surface of the reflector with a soft cloth and mild automotive soap to remove dirt, dust, and grime. Avoid abrasive cleaners or harsh chemicals that could scratch or damage the reflective surface.
- Inspection: Periodically inspect the reflector for any signs of damage, cracks, or discoloration. Ensure it remains securely attached to the bumper. If any damage is observed, consider replacing the unit to maintain safety standards.
- Avoid Exposure: While designed for outdoor use, prolonged exposure to extreme conditions (e.g., direct sunlight for many years, harsh chemicals) can degrade the material over time.
8. Troubleshooting
As a passive component, troubleshooting for a reflector is minimal. However, if you notice any issues, consider the following:
- Poor Reflection: If the reflector appears dull or doesn't reflect light effectively, first ensure it is clean. Accumulated dirt or grime can significantly reduce its reflective properties.
- Physical Damage: Check for any cracks, chips, or deep scratches on the reflector's surface. Physical damage can impair its function. If damaged, replacement is recommended.
- Loose Fitment: Ensure the reflector is securely mounted. A loose reflector might vibrate or fall off, posing a safety hazard. Re-secure it if necessary.
If problems persist after these checks, contact customer support or a qualified automotive technician.
9. User Tips
- Always double-check the fitment for your specific Mercedes-Benz Sprinter model and year before purchasing to ensure compatibility.
- When installing, apply gentle, even pressure to avoid cracking the plastic.
- Consider replacing both left and right reflectors simultaneously for a uniform appearance and consistent safety performance.
10. Manufacturer & EU Representative Information
- Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou
- EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND
11. Compliance Information
This product is an aftermarket automotive part and is not an original equipment manufacturer (OEM) part. It must not be used for illegal modifications or unauthorized purposes. The product complies with relevant national automotive parts industry standards and has undergone rigorous quality inspections prior to shipment, meeting all factory standards.
12. Support & Warranty
For any product inquiries, technical support, or warranty claims, please contact your retailer or the manufacturer directly using the contact information provided in the 'Manufacturer & EU Representative Information' section. Please have your purchase details and product model number ready when contacting support.