Safety Instructions
WARNING
- Please connect the power supply correctly according to the matching specifications.
- Do not allow water or metal objects to enter the device.
- Do not open the cover of the device without authorization. If maintenance is needed, contact qualified personnel.
- Do not modify the device without authorization, as this may cause damage or electric shock.
- In case of thunder and lightning, please turn off the power.
- Do not disassemble or modify the machine by yourself.
- When the power cord is damaged (cut or exposed wires), purchase a replacement from the dealer.
- If you find any abnormal smell or noise, immediately turn off the power and unplug the power plug.
ATTENTION
- When the device is in normal working condition for a long time, the temperature of the body may rise. If the external environment temperature exceeds 30°C, the temperature of the plastic casing at the power input socket may exceed 50°C. Please be careful to avoid burns.
- When unplugging the power plug from the AC power outlet, grasp the plug part and do not pull the cord directly.
- Do not touch the power plug with wet hands.
- Avoid using the device in humid environments, direct sunlight, or near heat sources.
Product Overview
The TEYUN A4 is a professional 4-channel mixing console designed for broadcast and recording applications. It features a compact design with versatile connectivity and effects.
Key Features:
- 4 Channels (2 Mono + 1 Stereo)
- Delay & Repeat Effects
- Bluetooth 5.0 Functionality
- +48V Phantom Power for condenser microphones
- USB/PC Play and Record capabilities
- RCA Jack for external audio devices
Input and Output Connection Parts:
The mixer supports connections for dynamic microphones, condenser microphones (via XLR and 1/4" jack), computers and U-disks (via USB port), mobile phones (via Bluetooth), headphones (via phone out), and DVD/music players (via RCA socket).
Setup Guide
1. Power Supply
The mixer operates on 5V 2A power. You can power it using:
- The included power adapter (100-240V input, 5V 2A output).
- A power bank.
- A computer via USB.
Important:
- Ensure the power supply is 5V 2A for normal operation.
- When using PC USB power, it is suitable for single-person recording or music appreciation, not multi-channel music combinations.
2. Microphone Connections
The mixer supports both dynamic and condenser microphones.
- Dynamic Microphones: Connect via an XLR cable to the MIC/LINE input. Do NOT activate +48V phantom power for dynamic microphones.
- Condenser Microphones (+48V): Connect via an XLR cable to the MIC/LINE input and activate the +48V phantom power button.
- Phantom Power Note: The +48V phantom power is only for XLR sockets, not for 6.3mm sockets.
- Unsupported Microphones: This model does not support non-48V condenser microphones, such as those with a 3.5mm plug.
- USB Microphones: The USB port is not designed for USB microphones. Do not connect USB microphones to the audio mixer.
3. Connecting to PC for Record & Play
Use the provided USB cable to connect the mixer to your computer. Ensure the MP3/PC button on the back panel is in the 'up' position for PC mode.
4. RCA Jack Connections
The RCA jacks (LEFT/RIGHT) can be used to connect external audio sources like CD players, mobile phones, or active speakers.
Operation
1. Channel Section Controls (Inputs 1-4)
- MIC/LINE Mono Input Jack (Channels 1-4): Used to connect microphones, musical instruments, or audio equipment (e.g., CD players). Supports both XLR and phone plugs.
- PHANTOM 48V Switch (Channels 1-2): When turned on, the LED lights up, indicating that MIC/LINE input ports 1 and 2 can supply DC-48V phantom power. Ensure this switch is OFF if phantom power is not needed to prevent noise and damage to external equipment.
- GAIN Knob: Controls the basic volume of channels 1-4. When singing or playing at maximum volume, the corresponding PEAK LED should flash briefly.
- Equalizer (EQ) Knobs (HIGH/LOW): Use the HIGH (high frequency band) and LOW (low frequency band) knobs to adjust the sound quality. Set to the vertical position if no adjustment is needed.
- FX/G1/G2, LINE(G1,G2) Knob: Adjusts the volume of the signal sent from each channel to the FX, G1/G2 bus, PC recording output, or 3.5MM jack.
- PRE Switch: This switch determines whether the signal is sent to the FX, G1, G2 bus before or after the channel LEVEL knob. When turned on, the audio zone sends the signal before the LEVEL knob to the FX/G1/G2 bus, unaffected by the LEVEL knob.
- LEVEL Knob: Adjusts the volume balance between each channel. Usually set to the 'three o'clock' position.
- MAIN LEVEL Knob: Controls the total volume output from MAIN OUT.
- MAIN/PH Knob: Controls the volume output from the MAIN PH and PHONES jacks.
- 1.5MM(PH) Output Jack: Used to connect headphones. Supports stereo PH plug.
- FX MUTE Switch: When turned on, all effects are interrupted. Turn off to restore previous effect state.
2. Bluetooth Connectivity
The mixer is a Bluetooth receiver, meaning it can receive audio from devices like smartphones but cannot connect to other Bluetooth receiving devices (e.g., Bluetooth speakers).
Volume Adjustment for Bluetooth:
- Press down the ST/USB button.
- Rotate the 3-4/USB knob to adjust the channel volume to the main output.
- Adjust the MAIN output knob.
3. Delay & Repeat Effects
These effects are applicable only to channels 1-2.
To Output Effects:
- Press down the EFX button of the channel.
- Rotate the volume knob of the channel.
- Rotate the REPEAT/DELAY knobs to your desired settings.
- Rotate the MAIN knob to adjust the overall effect output.
Note:
- Before using the DELAY effect, the REPEAT effect knob must be rotated to a position greater than "0". Otherwise, there will be no delay effect output.
4. USB Port Application (U-disk)
The USB port supports U-disk playback and recording.
U-disk Playback:
- Supported formats: MP3, FLAC, WAV, WMA.
- Press down the MP3/PC switch button.
- Insert a U-disk into the USB port; it will play automatically.
- Volume adjustment is the same as Bluetooth volume control.
U-disk Recording:
- U-disk format: FAT32. NTFS U-disks are not recognized.
- Ensure there is at least one song on the FAT32 U-disk.
- Press down the MP3/PC button on the back panel.
- Insert a FAT32 U-disk.
- Record format: MP3.
- Record Operation:
- Short press the "MODE" button to enter REC mode.
- Long press the "pause (continue)" button to start recording.
- Long press the "pause (continue)" button again to exit recording and continue playing previous music files.
- During recording, short press "pause (continue)" to pause/resume recording.
- Record volume adjustment is the same as Bluetooth volume control.
- Recording parameter: 16Bit 48KHz.
5. MP3/PC Port Switch Button
This button on the back panel switches between U-disk (MP3) and PC audio input/output modes.
6. Gain Knob Adjustment
Adjust the gain knob only when the output signal is insufficient. Be aware that increasing gain also increases the noise level.
- When the PEAK light is on, the signal is distorted.
- If the PEAK light flashes frequently, adjust the GAIN knob to the left or decrease the channel/main output volume.
7. Headphone Volume Control
Adjust the headphone output volume using the dedicated PHONES knob.
Applications
The TEYUN A4 mixer is suitable for a variety of audio scenarios:
- KTV parties
- Podcasting
- Home studio music recording
- Meetings and conferences
Specifications
| Feature | Specification |
|---|---|
| Brand Name | TEYUN |
| Model Number | A4 |
| Type | Mixers |
| Channels | 4 (2 mono + 1 stereo) |
| Effects | Yes (Delay, Repeat) |
| Sound Card Function | Yes |
| Bluetooth Version | 5.0 |
| +48V Phantom Power | Yes |
| USB Record & Play | Yes |
| PC Record & Play | Yes |
| USB Play Format | MP3, WMA, WAV, FLAC |
| Material | Plastic |
| Input Voltage | 100-240V |
| Output Voltage | 5V 2A |
| Voltage Range | USB (5-20V DC) |
| Inbox Adaptor | Yes |
| Built-in Battery | No |
| Power Source | DC |
| Certification | CE |
| Socket Types | XLR, 6.35mm, RCA |
| Connecting Devices | Dynamic microphone, condenser mic, computer, mobile phone, speaker, headphone |
Troubleshooting
- No Power: Ensure the 5V 2A power adapter is correctly connected and the power switch is on. Check if the power source (adapter, power bank, or computer USB) is functioning.
- No Sound Output:
- Check all input and output cable connections.
- Verify that channel LEVEL, MAIN LEVEL, and PHONES knobs are adjusted appropriately.
- Ensure the correct input source (USB, PC, BT, LINE) is selected via the MP3/PC switch button.
- Distorted Sound (PEAK light on): If the PEAK light flashes frequently or stays on, the input signal is too high. Reduce the GAIN knob for the affected channel or decrease the input volume from the source device.
- No Delay Effect: Ensure the REPEAT effect knob is set to a position greater than "0" before attempting to use the DELAY effect.
- U-disk Not Recognized: Ensure the U-disk is formatted to FAT32. NTFS format is not supported. Also, confirm there is at least one audio file on the U-disk.
- Bluetooth Connection Issues: Ensure the mixer is in Bluetooth mode and your device is searching for a Bluetooth receiver. Remember, the mixer acts as a receiver only and cannot connect to Bluetooth speakers.
- No +48V Phantom Power: Ensure the +48V button is pressed and the LED is lit. Confirm that the condenser microphone is connected via an XLR cable, as phantom power is not supplied to 6.3mm sockets.
User Tips
- For optimal recording quality when using PC USB power, it is recommended to use an advanced PC device.
- When recording to a U-disk, ensure the U-disk is FAT32 formatted and contains at least one song for proper recognition.
- Always check the PEAK indicator to prevent signal distortion; adjust the gain or input volume if it lights up frequently.
Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation or contact the seller directly.
A comprehensive user manual in PDF format is available for download. You can view the PDF manual for additional instructions and diagrams: View User Manual (PDF)