MOES TWV-YZD01-MS

Contents

MOES 1-Outlet Water Timer Instruction Manual

Model: TWV-YZD01-MS

Home, Smart Moes Home

1. Introduction

Thank you for choosing the MOES 1-Outlet Water Timer. This device is designed to automate your garden irrigation, ensuring efficient watering and water conservation. Featuring a durable brass inlet, a clear LCD display, and user-friendly controls, it offers timed watering, rain delay, and a child lock function for enhanced safety and convenience.

2. Safety Warnings

  • Do not disassemble, reassemble, modify, or attempt to repair this product by yourself. All maintenance and repairs should be performed by authorized professionals.
  • Ensure your hands are dry when handling batteries and the battery compartment.
  • Do not moisten the battery and battery compartment.

3. Product Overview

The MOES Water Timer features a clear LCD display, a rotary dial for mode selection, and four control buttons. Its robust design includes a brass inlet for enhanced durability and IP55 waterproofing.

MOES 1-Outlet Water Timer with its components labeled: Hose tap Connection, Big LCD Screen, Outlet, and control buttons.

Figure 1: Water Timer Components

3.1. Components

  • Hose Tap Connection: For connecting to your water source.
  • Big LCD Screen: Displays current time, watering schedules, and settings.
  • Outlet: For connecting your irrigation hose.
  • Timer Dial: Rotary knob to select different modes: SET CLOCK, START TIME, HOW LONG, HOW OFTEN, AUTO, OFF.
  • Buttons:
    • '+' Button: Adjust time, system setup, or delay watering program.
    • '-' Button: Adjust time, system setup, or child lock.
    • 'Cycle/Plan' Button: Switch between P1, P2, P3 in START TIME & HOW LONG modes; switch between 'By day' and 'By week' in HOW OFTEN mode.
    • 'OK/Manual' Button: Confirm settings or proceed to the next step. In AUTO mode, click to set up manual watering.

3.2. Screen Content Overview

Display ItemDescription
SU-SASet the current day of the week and set watering day (Sunday to Saturday).
P1/P2/P3Set different watering plans.
EveryIndicates watering every few days.
NEXTThe next watering time.
By daySet cycle by day, 1 day to 7 days.
By weekSet cycle by week, Sunday to Saturday.
SET CLOCKSet current time.
START TIMESet the time of start watering.
HOW LONGSet watering duration (1 minute to 23 hours 59 minutes).
HOW OFTENSet watering frequency (Sunday to Saturday / 1 day to 7 days).
AUTOAutomatically run watering schedules.
OFFTurning off the watering timer.

3.3. Screen Icons

  • Battery Indicator: Shows current battery level.
  • Children Lock: Indicates child lock is active.
  • Watering: Indicates active watering.
  • Rain Delay: Indicates rain delay is active.

4. Specifications

FeatureSpecification
ModelYZD01
Water DurationOFF, 00H01M~23H59M
Watering FrequencySunday to Saturday / 1 day to 7 days
Working Pressure0.5-8bar (7.25psi - 116psi)
ThreadFor taps with 3/4"
Working Temperature4.5℃-45℃ (40.1℉-113℉)
Battery Power2x AA Alkaline batteries (Do not use rechargeable batteries)
Waterproof RatingIP55
Package Dimensions21cm (L) x 16cm (W) x 7cm (H)
Package Weight0.398 kg

5. Setup

5.1. Installing the Batteries

  1. Remove the cover on the back of the timer by pulling it out.
  2. Install 2 new AA (1.5V) alkaline batteries (not included). Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
  3. Firmly reinstall the cover back into the timer.

Note: Please pay attention to the positive and negative poles of the battery and place them correctly.

Video 1: Demonstrates battery installation and basic clock setting.

5.2. Battery Status

When a low battery indication appears on the display, the valve will automatically close to avoid leakage. Replace the batteries promptly to ensure normal operation.

6. Operating Instructions

Use the rotary dial and buttons to program your watering schedule.

6.1. Set Clock (Current Time)

  1. Turn the dial to SET CLOCK.
  2. Set Current Day: Press '+' or '-' to select the current day of the week. The 'Day' will flash when selected. Press 'OK' to confirm and move to set the current time.
  3. Set Current Time: Press '+' or '-' to set the current hour and minutes. Press 'OK' to confirm.
  4. Turn the dial to START TIME to save the setting.

6.2. Set Start Time

This timer allows for up to three different watering plans (P1, P2, P3).

  1. Turn the dial to START TIME.
  2. Press 'Cycle/Plan' to switch between P1, P2, and P3.
  3. Press '+' or '-' to set the hour of the start time. Press 'OK' to confirm and move to set the minutes.
  4. Press '+' or '-' to set the minutes of the start time. Press 'OK' to confirm.
  5. Turn the dial to HOW LONG to save the setting.

6.3. Set How Long (Watering Duration)

  1. Turn the dial to HOW LONG.
  2. Press 'Cycle/Plan' to switch between P1, P2, and P3.
  3. Press '+' or '-' to set the watering duration from OFF (00H00M) to 23 hours 59 minutes. Press 'OK' to confirm.
  4. Turn the dial to HOW OFTEN to save the setting.

6.4. Set How Often (Watering Frequency)

There are two modes for watering frequency: 'By week' and 'By day'.

  1. Turn the dial to HOW OFTEN.
  2. Press 'Cycle/Plan' to choose the mode you need ('By day' or 'By week').
  3. By day Mode: Press '+' or '-' to select a watering frequency from 1 day to 7 days. Press 'OK' to confirm.
  4. By week Mode: Press '+' or '-' to move between days (SU, MO, TU, WE, TH, FR, SA). Press 'OK' to confirm a selected day. The selected day will flash and a bracket '[]' will appear. To cancel a selection, press 'OK' again.
  5. Turn the dial to AUTO to save the setting.

6.5. Auto Mode

  1. Turn the dial to AUTO. The watering plan will be automatically executed. The screen will turn off after 1 minute.
  2. The screen will display the current time and the next watering time when the valve opens, cycling every 1.5 seconds.

Note: When the watering times for P1/P2/P3 overlap, execution will follow the timeline, with the earliest watering time taking priority. If watering is interrupted by the next watering plan, the previous watering will be paused and the next one will be executed.

6.6. Off Mode

  1. If you wish to stop the watering plan for an extended period, turn the dial to OFF. (Your settings are saved).
  2. The timer will not water automatically while in OFF mode (The screen will display the word OFF in large letters).
  3. To start watering automatically again, turn the dial back to AUTO to resume your programmed watering schedule.

6.7. Rain Delay Watering

Rain Delay mode allows you to skip the watering schedule for a set period, helping to save water during rainy days.

  1. When the dial is at the "AUTO" position, press the '+' button for 3-5 seconds to enter the rain delay mode.
  2. The screen will display '1 day' by default. Press '+' or '-' button to select 1 day to 15 days for rain delay. Press 'OK' to confirm.
  3. To quit rain delay mode, hold the '+' button again for 3-5 seconds to resume your programmed watering schedule.

Tip: Manual watering is available when in rain delay watering.

6.8. Manual Watering

This feature allows you to water without interrupting your watering schedule.

  1. Keep the dial at the "AUTO" position. Click 'OK' button to enter manual watering mode.
  2. The default duration for manual watering is 10 minutes. Press '+' or '-' button to set the manual watering time from 1 minute to 120 minutes.
  3. Press 'OK' to start watering. Otherwise, it will quit after 10 seconds.

6.9. Child Lock Function

  1. Keep the dial at the "AUTO" position. Press and hold the '-' button for 5 seconds until a lock icon appears on the screen.
  2. To cancel the child lock setting, press and hold the '-' button again for 3 seconds.

7. Troubleshooting

ProblemPossible CausePossible Solution
Leakage1. No silicone gasket installed
2. The faucet is not the standard 3/4"
1. Add silicone gasket
2. Make sure the faucet is a 3/4" faucet.
3. Wrap with Teflon tape.
The water won't stop / flow out1. Long time storage and transportation make the valve inactive.
2. Valve blockage
1. Keep the tap turned off and turn the timer dial to AUTO.
2. Run the manual watering function for 5-7 seconds and stop it.
3. Repeat step 2 for 3 to 5 times.
4. Try to use it normally.
Short battery life1. Mixed use of old and new batteries.
2. Used carbon batteries or rechargeable batteries.
Use new alkaline batteries.
Low water pressure1. Filter blockage.
2. Inlet pressure not sufficient to support watering needs.
1. Check if the filter is clogged, clean or replace the filter.
2. Make sure the timer is installed properly and the thread is 3/4".
3. Installation of a booster pump or other auxiliary equipment for increasing water pressure.
No response for manual/rain delay functionAfter setting manual watering or rain delay time, without pressing OK button to save and run.Press OK button again after the time is confirmed.

8. User Tips

  • Always use new alkaline batteries and avoid mixing old and new ones to ensure optimal performance and prevent issues. Rechargeable batteries are not recommended.
  • For best results, ensure the timer is installed securely and the faucet connection is tight to prevent leaks.
  • Regularly check the battery indicator and replace batteries when low to avoid interruption of watering schedules.

9. Maintenance

  • Remove batteries if the timer will not be used for an extended period or before winter to prevent damage.
  • Periodically check and clean the filter to prevent blockages and ensure consistent water flow.
  • Ensure the battery compartment cover is securely fastened to maintain waterproofness.

10. Warranty & Support

10.1. Warranty Instructions

This product is covered by a 24-month warranty, effective from the date of purchase by a retail customer. To exercise warranty rights, the purchaser must present a warranty card and proof of purchase (VAT invoice, financial receipt, or other document confirming the actual date of purchase).

The warranty does not cover:

  • Mechanical damage caused by user fault or product defects resulting from such damage.
  • Damage caused by improper use of the product.
  • Defects due to natural wear and tear during use.
  • Use of non-original parts and consumables.
  • Removal of the warranty seal or serial number from the product.
  • Actions to eliminate physical defects outside of authorized service.

For quality problems within 24 months of receipt, prepare the product and packaging and return to the place of purchase for after-sales maintenance. If damage is due to personal reasons, a maintenance fee may apply.

10.2. Declaration of Conformity

WENZHOU NOVA NEW ENERGY CO., LTD declares that the radio equipment type YZD01 is in compliance with Directives 2014/30/EU and 2011/65/EU. The full text of the EU declaration of conformity is available at: https://www.moestech.com/blogs/news/twv-yzd01

10.3. Recycling Information

All products marked with the WEEE symbol (Waste Electrical and Electronic Equipment Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. To protect health and the environment, dispose of this equipment at designated collection points for electrical and electronic equipment. Correct disposal and recycling help prevent negative environmental and health consequences. Contact your installer or local authority for collection points.

10.4. Manufacturer & Support Contact

Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service: service@moeshouse.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.