1. Product Overview
This manual applies to the POE (Power over Ethernet) series of accessories, including core products such as POE power supplies (injectors), POE splitters, and POE extenders. POE technology transmits both data and power simultaneously over a single Ethernet cable, eliminating the need to lay separate power lines. This significantly simplifies the deployment of network devices while reducing installation costs and complexity. Widely utilized to power network terminal devices such as IP cameras, wireless APs, VoIP phones, and smart sensors these accessories are suitable for a diverse range of environments, including homes, enterprises, campuses, and security surveillance systems.
All accessories in this POE series comply with IEEE 802.3af/at/bt standards. Featuring functions such as intelligent detection, overload protection, and short-circuit protection, they automatically identify POE-compliant Powered Devices (PDs), providing safe and stable power and data transmission services to terminal devices while also supporting the upgrade and retrofitting requirements of non-POE equipment.

Product Showcase Video
This video provides a visual overview of the REVODATA PoE to Type-C Converter, showcasing its design and components.
2. Safety Precautions
2.1 General Safety Guidelines
- Please operate the product within the working voltage and power ranges specified on its label. Operation exceeding these limits is strictly prohibited, as it may result in equipment damage or pose safety hazards.
- Prior to installation or wiring, ensure that the power supply to all equipment is disconnected to prevent electric shock or short-circuit accidents. When performing operations, please wear insulating gloves to avoid direct contact between your hands and metal connectors.
- Accessories must be stored in a well-ventilated, dry, and cool environment, away from water sources, high temperatures, flammable or explosive materials, and corrosive gases. Avoid exposure to direct sunlight or immersion in rainwater. The operating environment temperature must comply with the product specifications (typically 0°C to 45°C), and the relative humidity should be maintained between 10% and 90% RH (non-condensing).
- Unauthorized disassembly or modification of the accessory's housing or internal circuitry is strictly prohibited. Any repairs must be performed by qualified technical personnel; failure to comply will void the product warranty and may pose safety risks.
- If the accessory is to remain unused for an extended period, please disconnect its power supply to prevent excessive standby power consumption and premature equipment aging.
2.2 Wiring Safety Precautions
- Please use pure copper Ethernet cables of Cat5e specification or higher that comply with relevant standards. Avoid using Copper-Clad Aluminum (CCA) cables or inferior-quality cables; otherwise, this may lead to unstable power supply, data packet loss, or even cable overheating—caused by excessive electrical resistance—which could result in equipment damage.
- The transmission distance of the Ethernet cable must be kept within the product's specified range (standard PoE transmission distance is limited to 100 meters; the use of a repeater can extend this to 200 meters). Exceeding the specified distance will result in power attenuation and signal distortion.
- When routing cables outdoors, a lightning arrester must be installed. Additionally, both ends of shielded cables must be properly grounded to eliminate electromagnetic interference and prevent equipment damage caused by lightning strikes.
- When making connections, ensure that the interfaces are correctly matched; avoid reverse connections or misconnections, as this may prevent the device from functioning properly or result in equipment damage.
3. Product Interface Description
This PoE to Type-C Converter functions as a PoE Splitter, receiving combined power and data over Ethernet and splitting it into separate data and Type-C power outputs.

- PoE In (PoE Input Port): An RJ45 interface used to connect to the PoE output port of a PoE switch or PoE injector, receiving a combined signal containing both power and data.
- Type-C Output Port: This port provides both data and power via a USB-C connection to the terminal device (e.g., Amazon Echo Hub). The output voltage must match the device's requirements (5V/2.4A or 9V/3A).
Indicator Light Descriptions
The meanings of the indicator lights on all PoE accessories are generally consistent; please refer to the specific product markings for exact details:
- PWR (Power Indicator): Off = No power; Solid (Green) = Normal power supply; Flashing = Power anomaly.
- PoE (Power Supply Status Indicator): Off = No powered device detected or no power being supplied; Solid (Green) = Normal power supply; Flashing (Green) = Power supply anomaly (e.g., overload, short circuit); Yellow = Standby mode.
- Link (Port Connection Indicator): Off = No device connected; Solid = Connection established; Flashing = Data transmission in progress.
4. Installation and Usage Steps
4.1 Preparation
- Inspect the accessory packaging to ensure it is intact; verify that all components are present and free from damage or missing parts.
- Confirm whether the terminal devices (e.g., Amazon Echo Hub) support the required Type-C power input (5V/2.4A or 9V/3A) and data via USB-C.
- Prepare pure copper Ethernet cables of Cat5e specification or higher that meet the requirements; cut the cables to the appropriate length based on the installation distance, and ensure the RJ45 connectors are securely crimped.
- Verify that the power output of the power-sourcing equipment (e.g., PoE switches) is compatible with the converter to prevent overloading.
4.2 Installation Steps: PoE Switch + PoE Splitter + Non-PoE End Device (e.g., Amazon Echo Hub)
This scenario describes connecting the PoE to Type-C Converter (acting as a PoE Splitter) to a non-PoE device like the Amazon Echo Hub.

- Power-off Operation: Disconnect all power sources from the PoE switch and the Amazon Echo Hub.
- Connect PoE Input: Insert one end of an Ethernet cable into a PoE port on the PoE switch, and insert the other end into the "PoE In" RJ45 port on the PoE to Type-C Converter.
- Connect Type-C Output: Connect the integrated Type-C cable from the PoE to Type-C Converter into the USB-C input port of the Amazon Echo Hub.
- Power On: Connect the power supply to the PoE switch.
- Status Check: Observe the indicator lights on the PoE to Type-C Converter. If the "PoE" light remains steadily lit and the Amazon Echo Hub boots up normally, the installation is successful.

5. Routine Operation
- Once the device has powered on, no manual configuration is required; the accessory will automatically detect the powered device (PD) and simultaneously initiate both power supply and data transmission (for unmanaged accessories).
6. Maintenance
- Keep the device in a clean, dry, and well-ventilated environment.
- Periodically check to ensure that network cable connections are secure and that the status indicators are functioning normally.
- If you need to replace a terminal device, you must first disconnect the power to the PoE accessory before plugging or unplugging the network cable to prevent potential device damage caused by hot-swapping.
- Avoid exposing the device to extreme temperatures, direct sunlight, or moisture.
7. Troubleshooting
- No Power/No Link: Check all cable connections. Ensure the PoE switch is powered on and providing PoE. Verify the Ethernet cable is Cat5e or higher and properly crimped. Check the indicator lights on the converter and the connected devices.
- Abnormal Indicator Blinking: Refer to the "Indicator Light Descriptions" section. Flashing PWR or PoE lights may indicate a power anomaly, overload, or short circuit. Disconnect and re-connect devices to isolate the issue.
- Frequent Terminal Device Restarts: This could indicate unstable power supply or data issues. Check cable quality and length. Ensure the power output of the PoE source is sufficient for the connected device.
- No Data Transmission: Verify both the PoE input and Type-C output cables are securely connected. Check the Link indicator light. Ensure the connected device's network interface is functioning correctly.
8. Specifications

| Attribute | Value |
|---|---|
| Brand Name | REVODATA |
| Model Number | PD2CAT-20V-ECHO |
| PoE Standard | IEEE802.3 af/at (25W) |
| Power Input | DC 37-57V |
| Power Output | Type-C 5V/3A, 9V/2.6A, 12V/2A, 15V/1.6A, 20V/1.25A (Note: Image states 5V/3A 9V/2.5A) |
| Transfer Rate | 10/100Mbps (12.5Mb/s) |
| Interface Type | 1 RJ45 input port, 1 DC output port (Type-C) |
| Dimension (L*W*H) | 78mm * 25mm * 35mm |
| Weight | 60g |
| Material | Metal |
| Origin | Mainland China |
| Certification | CE |
| Operating Temperature | 0°C-45°C (Standard Models) |
| Storage Temperature | -40°C-70°C |

9. User Tips
- This PoE to Type-C converter is specifically designed to work well with devices like the Amazon Echo Hub, ensuring compatibility with its USB PD protocol and power requirements (5V/2.4A and 9V/3A).
- When selecting a PoE adapter for your Echo Hub, ensure it explicitly supports the necessary power delivery standards to avoid compatibility issues.
10. Warranty and Support
Warranty Information
- Warranty Period: This PoE accessory is covered by a 1-year free warranty service and lifetime maintenance support, effective from the date of purchase (excluding damage caused by human error or force majeure).
- Warranty Coverage: Covers malfunctions preventing normal operation that stem from inherent product quality issues including damaged ports, circuit failures, abnormal indicator lights, etc. This coverage does not extend to peripheral accessories such as network cables or power adapters (which carry a separate 6-month warranty period).
- Exclusions: Damage caused by human error (e.g., disassembly, modification, accidental drops, short circuits, etc.); Damage caused by force majeure events (e.g., lightning strikes, fire, floods, etc.); Expiration of the warranty period; Damage resulting from failure to operate the device in accordance with the user manual.
After-Sales Support
Should the device malfunction, please contact your authorized distributor or the official customer support team. Provide the product model and a description of the malfunction to receive professional repair guidance.
An official user manual in PDF format is available for download: View User Manual (PDF)