PAXA ZJ08 Bluetooth Speaker User Manual

1. Introduction

Thank you for purchasing the PAXA ZJ08 Bluetooth V5.3 Induction Stand Speaker. This manual provides essential information for the safe and efficient use of your new speaker. Please read it carefully before use and keep it for future reference.

2. Safety Warnings

Do not immerse the product in water or any other liquid, as this product is not waterproof.
If any liquid accidentally enters the product, immediately disconnect it and remove it from use.
To avoid electric shock, ensure your hands are dry before installing or uninstalling the product.
Keep the device away from extreme temperatures, direct sunlight, and high humidity.
Do not attempt to disassemble, repair, or modify the device yourself. Contact qualified service personnel if needed.

3. Package Contents

Please check that all items are present:

PAXA ZJ08 Induction Stand Speaker
USB Charging Cable
User Manual (this document)

4. Initial Setup

4.1. Charging the Speaker

Before first use, ensure the speaker is fully charged. The speaker may be fully discharged or at low battery upon arrival.

Connect the provided USB charging cable to the charging port on the speaker.
Connect the other end of the USB cable to a compatible USB power source (e.g., computer, wall adapter).
Charge the speaker for approximately 1 hour before its initial use.

The charging parameters are DC5V (>600mAh) and charging time is typically less than 2 hours for a full charge.

Diagram showing the charging port and control buttons on the PAXA ZJ08 speaker. — Figure 1: Key functions and charging port location.

Internal view of the speaker showing the 1200mAh lithium battery. — Figure 2: The speaker features a built-in 1200mAh large-capacity lithium battery.

5. Operating Instructions

5.1. Power On/Off

Power On: Press and hold the power button for 3 to 5 seconds to turn on the device.
Power Off:
- In a disconnected state, the device will automatically shut down after 10 minutes.
- If connected but with no playback or call, the device will shut down after 30 minutes.
- Alternatively, press and hold the power button for 3 to 5 seconds to manually shut down the device.

5.2. Bluetooth Connection

The PAXA ZJ08 uses Bluetooth V5.3 for wireless audio streaming.

Ensure the speaker is powered on and in Bluetooth mode (indicated by the mode switch).
On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
Select "PAXA ZJ08" from the list of found devices to pair.
Once paired, the speaker will confirm the connection, and you can start playing audio.

5.3. Induction Mode (Bluetooth-Free)

The ZJ08 features magnetic induction technology for instant audio playback without Bluetooth pairing.

Ensure the speaker is powered on and in induction mode (use the Bluetooth/sensing mode switch).
Place your mobile phone or tablet onto the speaker's stand. The built-in sensor device will automatically detect the phone's audio and amplify it.
No Bluetooth pairing is required for this mode.

Black PAXA ZJ08 speaker with a phone placed on it, illustrating the induction feature. — Figure 3: Induction mode activates sound as soon as the device is placed.

White PAXA ZJ08 speaker with a phone hovering over it, showing magnetic induction connection. — Figure 4: Magnetic induction connects instantly for seamless audio.

5.4. Volume Control and Mode Switching

Use the dedicated buttons on the speaker for volume adjustment and switching between Bluetooth and induction modes.

Volume -: Decrease volume.
Volume +: Increase volume.
Switch: Toggle between Bluetooth and induction sensing modes.

PAXA ZJ08 speaker with a phone, highlighting dual-mode voice control and free switching. — Figure 5: Dual-mode voice control allows free switching between induction and Bluetooth 5.3.

6. Key Features

Bluetooth V5.3: Provides stable and efficient wireless connectivity.
Induction Stand Speaker: Automatically amplifies phone audio when placed on the stand, no pairing needed.
360° Sound System: Delivers immersive audio with a wide sound field.
Long Endurance Battery: Built-in 1200mAh lithium battery offers approximately 3-4 hours of play time and up to one week standby.
Voice Control: Supports intelligent personal assistant functions.
Strong Compatibility: Works with Android, Apple phones, and tablets without specific device selection.
Surging Low Frequency: Customized heavy bass diaphragm for powerful bass.
No Noise or Distortion: Engineered for clear audio output.
Ergonomic Design: Anti-skid pad at the bottom, adjustable joints for stability.

Diagram showing the internal components of the speaker and its 360-degree sound field system. — Figure 6: The 360° sound field system with back directional sound guide hole and dual graphene diaphragm.

PAXA ZJ08 speaker with a phone and a tablet, demonstrating strong compatibility. — Figure 7: Strong compatibility with various mobile devices.

7. Specifications

Feature	Specification
Model	ZJ-08
Brand Name	PAXA
Bluetooth Version	5.3
Bluetooth Chip	JL
Bluetooth Distance	>10M (Maximum wireless range <10m)
Speaker Type	Portable, Induction Stand Speaker
Speaker Specifications	440mm, 4Ω/5W*1
Audio Crossover	Full-Range
Number of Loudspeaker Enclosure	1
Sound Mode	Hi-Res Sound Mode, 3D Surround Sound Mode, Immersive Sound Mode, Stereo Sound Mode
Frequency Response	200Hz-16KHz
Signal-to-Noise Ratio	>90dB
Distortion	<10%
Amplifier Specification	3.7V
Power Source	Battery
Battery Specification	Built-in 18650 1200mAh
Play Time	About 3-4 hours (play time varies depending on volume)
Charging Parameters	DC5V (>600mAh)
Charging Time	<2 hours
Voltage Range	USB (5-20V DC)
Input Power (W)	<25 W
Weight	275g
Material	ABS, Plastic (Cabinet Material)
Voice Control	Yes
Waterproof	No
Support APP	Yes
Display Screen	No
Remote Control	No
Support Memory Card	No
Certification	CE
Origin	Mainland China

Product parameters table for PAXA ZJ-08 speaker. — Figure 8: Detailed product parameters for the ZJ-08 speaker.

8. Maintenance

To extend battery life, turn off the speaker when not in use.
Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.

9. Troubleshooting (FAQ)

9.1. Bluetooth keeps disconnecting?

Ensure your device is within 10 meters of the speaker.
Avoid obstacles between your device and the speaker that might interfere with the signal.
Restart Bluetooth on both your phone/tablet and the speaker.

9.2. Connected but no sound?

Turn up the volume on both your phone/tablet and the speaker.
In your phone's Bluetooth settings, ensure the speaker is selected as the audio output device.
Try disconnecting and reconnecting the Bluetooth connection.

9.3. Induction mode not working or no sound?

Ensure the speaker is powered on and the mode switch is set to induction mode.
Verify that your phone is placed correctly on the stand, making proper contact with the induction area.
Check the volume levels on both your phone and the speaker.
If the issue persists, try restarting the speaker.

10. User Tips

Users have reported very good sound quality, especially appreciating the immersive experience.
The induction feature is highly convenient for quick audio playback without the need for Bluetooth pairing.
Remember to fully charge the speaker before its first use to ensure optimal battery performance.

11. Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation or contact your retailer. A user manual in PDF format may also be available for download from the seller's website for additional information.

Note: The official user manual (PDF) can be referenced here.

PAXA ZJ08