1. Introduction
Thank you for choosing the Deaoke C7 Portable Tire Inflator. This device is designed for convenient and efficient inflation of various items, including car tires, motorcycle tires, bicycle tires, and sports balls. It features a powerful motor, a large digital display, multiple inflation modes, and additional functions like an emergency light and power bank. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.
2. Safety Information
- Always operate the inflator in a well-ventilated area.
- Do not leave the inflator unattended while in use.
- Keep out of reach of children.
- Avoid prolonged exposure to direct sunlight or extreme temperatures.
- Do not use the inflator if it is damaged or malfunctioning.
- Ensure the correct pressure setting for the item being inflated to prevent over-inflation.
- The safety hammer function is for emergency use only. Handle with care.
3. Package Contents
Please check the box for the following items:
- Portable Tire Inflator (Air Pump)
- Car Tire Inflator Airtube
- Motorcycle Tire Airtube Adapter
- Bicycle Tire Airtube Adapter
- Swimming Ring Airtube Adapter
- Basketball Airtube Adapter
- Type-C Charging Cable
- 3M Cigarette Lighter Cord (for backup power)
- Storage Bag
- User Manual (this document)
4. Product Overview
Familiarize yourself with the components and controls of your portable tire inflator.
Control Panel & Interfaces:
| No. | Feature | No. | Feature |
|---|---|---|---|
| ① | Real-time tire pressure display | ⑨ | "-" key (Decrease preset pressure) |
| ② | Barometric unit indicator | ⑩ | Gas pipe interface |
| ③ | Preset tire pressure display | ⑪ | LED light |
| ④ | Battery indicator | ⑫ | Type-C charging interface |
| ⑤ | Custom mode indicator | ⑬ | DC supply power interface |
| ⑥ | "+" key (Increase preset pressure) | ⑭ | Power bank interface |
| ⑦ | Light key (Control LED light) | ⑮ | Vent hole |
| ⑧ | Mode switching / Unit switching button | ⑯ | Air pump nozzle storage |
5. Charging the Device
The inflator is equipped with a built-in rechargeable battery (3x 2600mAh, total 7800mAh). Before first use, fully charge the device.
Charging via Type-C:
- Connect the provided Type-C charging cable to the Type-C charging interface (⑫) on the inflator.
- Connect the other end of the cable to a 5V/2A USB power adapter (not included).
- The battery indicator (④) on the display will show charging status. A full charge takes approximately 3-4 hours.
Charging via Car Cigarette Lighter (Backup Power):
The inflator can also be powered directly from your car's 12V cigarette lighter socket using the included 3M cigarette lighter cord, which is useful when the internal battery is depleted.
- Plug the 3M cigarette lighter cord into your car's 12V cigarette lighter socket.
- Connect the other end of the cord to the DC supply power interface (⑬) on the inflator.
- The inflator can now be used directly, even if its internal battery is low.
Power Bank Function:
The inflator can also serve as a power bank to charge your mobile devices with a charging current up to 1.5A.
- Long press the Light key (⑦) to activate the power bank function. The display will show a battery symbol.
- Connect your mobile device's charging cable to the Power bank interface (⑭) on the inflator.
6. Setup and Initial Use
Attaching the Air Tube and Nozzle:
- Select the appropriate airtube adapter for the item you wish to inflate (e.g., car tire, bicycle, ball, swimming ring).
- Screw the selected adapter firmly onto the gas pipe interface (⑩) of the inflator.
- Connect the other end of the airtube to the valve of the item to be inflated. Ensure a secure connection to prevent air leakage.
7. Operating Instructions
Power On/Off:
- To power on, short press the Mode/Unit switching button (⑧).
- To power off, long press the Mode/Unit switching button (⑧).
Selecting Inflation Mode:
Short press the Mode/Unit switching button (⑧) to cycle through preset inflation modes: Car, Motorcycle, Bicycle, and Ball. Each mode has a default preset pressure value.
Adjusting Preset Pressure:
After selecting a mode, use the "+" key (⑥) and "-" key (⑨) to adjust the desired target pressure value. The display (③) will show the preset pressure.
Switching Pressure Units:
Long press the Mode/Unit switching button (⑧) to cycle through pressure units: PSI, BAR, KPA, and Kg/cm².
Starting/Stopping Inflation:
- Once the air tube is securely connected and the desired pressure is set, press the power button (center of ⑧) to start inflation.
- The inflator will automatically stop when the real-time pressure (①) reaches the preset pressure (③).
- To manually stop inflation, press the power button again.
LED Lighting Functions:
The inflator includes an LED light for illumination in low-light conditions.
- Short press the Light key (⑦) once: White illuminator light turns on.
- Short press the Light key (⑦) a second time: Bright red light with slow flash (warning mode).
- Short press the Light key (⑦) a third time: Bright red light with quick flash (SOS mode).
- Short press the Light key (⑦) a fourth time: Turns off the light.
Emergency Window Safety Hammer:
The inflator is equipped with an emergency window safety hammer. In critical situations, use the pointed end to break vehicle windows for escape. Keep this feature in mind for emergencies only.
Product Demonstration Video:
8. Maintenance and Storage
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the inflator and its accessories in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ensure the battery is charged periodically (e.g., every 3-6 months) if not in regular use, to maintain battery health.
- Check the air tube and nozzles for any signs of wear or damage before each use. Replace if necessary.
9. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Device does not turn on. | Battery is depleted. Charge the device using the Type-C cable or connect to car cigarette lighter for direct power. |
| Inflation is slow or ineffective. |
|
| Device stops unexpectedly during inflation. |
|
| Display is not clear or unresponsive. | Ensure the device is adequately charged. If issues persist, try restarting the device (power off and on). |
10. Specifications
| Item | Value |
|---|---|
| Product Name | Portable tire inflator |
| Rated Voltage/Power | DC12V/120W |
| Rated Input | 5V/2A |
| Max Pressure | 160PSI |
| Cylinder Specifications | 25mm diameter |
| Noise | 82db |
| Battery Capacity | 2600mAh*3PCS (7800mAh total) |
| Charging Time | 3~4h |
| Inflation Time (215/60R16 tire 0-36psi) | About 6mins |
| Charging Interface | Type-C |
| Inflation Pressure Range | 0.2-11.03bar / 3-160psi |
| Size | 195mm*76mm*55mm |
| Product Weight | 732g |
| Place of Origin | China, Guangdong |
| Brand Name | Deaoke |
| Model Number | C7 |
| Warranty | 12 Months |
| Functions | Emergency Light, Power Indicator, Tire Pressure Monitor, Tire Inflator, Portable Air Compressor, Power Bank, Emergency Window Safety Hammer, 3M Cigarette Lighter Cord (Backup Power) |
11. User Tips
- Verify Product: Upon receiving your order, please ensure you have received the Deaoke C7 Portable Tire Inflator and not a different product. If you received an incorrect item, contact your seller immediately.
- Pre-set Pressure: Always pre-set your desired tire pressure before starting inflation. The auto-stop feature will ensure you don't over-inflate.
- Night Use: Utilize the built-in LED light for better visibility when inflating tires in dark conditions.
- Emergency Power: Keep the 3M cigarette lighter cord handy in your vehicle. It allows you to use the inflator even if its internal battery is drained, providing continuous power.
12. Frequently Asked Questions (FAQ)
- Q: How long does it take to inflate a standard car tire?
- A: For a 215/60R16 tire, it takes approximately 6 minutes to inflate from 0 PSI to 36 PSI.
- Q: Can I use this inflator for large truck tires?
- A: The inflator has a maximum pressure of 160 PSI. While suitable for most passenger cars, motorcycles, and bicycles, check the recommended pressure for your specific truck tires. It might not be ideal for very large, high-pressure truck tires.
- Q: Does it automatically stop when the desired pressure is reached?
- A: Yes, the device features an automatic stop function. Once you set the target pressure, it will stop inflating automatically when that pressure is achieved.
- Q: What units of pressure does it support?
- A: It supports PSI, BAR, KPA, and Kg/cm². You can switch between these units by long-pressing the Mode/Unit switching button.
- Q: Can I charge my phone with this device?
- A: Yes, it has a power bank function with a charging current of up to 1.5A. Long press the Light key to activate it.
13. Warranty and Support
The Deaoke C7 Portable Tire Inflator comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.
For warranty claims, technical support, or any questions regarding your product, please contact the seller or manufacturer with your purchase details.