1. Product Overview
This manual provides instructions for the Surenoo 10.1" 1280*800 Dual Double LCD Module Monitor Display Screen with MIPI HDMI-Compatible Board. This display module offers a cost-effective solution for various applications, converting an 800x1280 portrait mode IPS MIPI screen to a 1280x800 landscape mode display via its controller board. It is designed to be compatible with a wide range of HDMI devices.
Key Features:
- LCD Size: 10.1 inches
- Resolution: 1280*800
- Display Type: IPS
- Interface: MIPI to HDMI (converted from 800*1280 Portrait to 1280*800 Landscape)
- Input Ports: HDMI, VGA, AV
- Power Supply: USB Type C 5-12V/2A
- Compatibility: Supports Raspberry Pi, Nvidia, Ubuntu Image, PS4, Windows PC, and more.
- Viewing Angle: 85/85/85/85 (Typ.) (CR≥10)
- Touch Function: Without
2. Specifications
| Attribute | Value |
|---|---|
| Brand Name | SURENOO |
| Model Number | 10.1 |
| Display Size | 10.1" |
| Resolution | 1280*800 |
| Type | IPS |
| Display Type | IPS |
| Touch Function | Without |
| Display Mode | NC |
| Origin | Mainland China |
| High-concerned chemical | None |
| is_customized | Yes |
Product Dimensions:
Refer to the diagram below for detailed module and active area dimensions.
3. Setup and Installation
Connecting the LCD to the HDMI Board:
Carefully follow the connection diagram to ensure proper assembly. Incorrect connection may damage the display's backlight.
HDMI Board Interface:
The HDMI board features several ports and buttons for power, input, audio, and display control.
- USB Type C (5-12V): Power input for the board.
- HDMI: Video input port.
- 3.5mm EarPhone: Audio output jack.
- Buttons:
- (1) Screen 180° Rotate: Rotates the display by 180 degrees.
- (2) Screen 90° Rotate: Rotates the display by 90 degrees.
- (3) Brightness-: Decreases display brightness.
- (4) Brightness+: Increases display brightness.
4. Operating Instructions
Powering On:
Connect the USB Type C cable to the power input (5-12V) on the HDMI board. Connect your video source (e.g., PC, Raspberry Pi) to the HDMI input.
Display Modes:
The dual LCD module supports two primary display modes:
- Copy Mode: Both screens display the same content.
- Extend Mode: The display content is extended across both screens, creating a larger virtual desktop.
Adjusting Display Settings:
Use the physical buttons on the HDMI board to adjust display settings:
- Brightness Adjustment: Press buttons (3) and (4) to decrease or increase the display brightness.
- Screen Rotation: Use buttons (1) and (2) to rotate the screen by 180° or 90° respectively.
5. Maintenance
To ensure the longevity and optimal performance of your Surenoo LCD module, follow these maintenance guidelines:
- Cleaning: Use a soft, lint-free cloth slightly dampened with water or a screen-specific cleaning solution. Avoid harsh chemicals, abrasive materials, or excessive moisture.
- Handling: Always handle the display by its edges. Avoid touching the screen surface directly to prevent fingerprints and scratches.
- Storage: When not in use, store the display in a cool, dry place away from direct sunlight and extreme temperatures.
- Power: Always use the recommended USB Type C power supply (5-12V/2A). Using an incorrect power supply can damage the board and display.
- Connections: Periodically check all cable connections to ensure they are secure and free from damage.
6. Troubleshooting
No Display/Black Screen:
- Check Power: Ensure the USB Type C power cable is securely connected and the power supply is active (5-12V/2A).
- Check HDMI Connection: Verify that the HDMI cable is properly connected to both the display board and the video source. Try a different HDMI cable if available.
- Video Source: Confirm that your video source (PC, Raspberry Pi, etc.) is powered on and outputting a signal.
- LCD Connection: Re-check the flexible flat cable connections between the LCDs and the HDMI board, ensuring they are correctly seated as per the installation diagram.
Incorrect Display Orientation:
- Use the 'Screen 180° Rotate' or 'Screen 90° Rotate' buttons on the HDMI board to adjust the display orientation.
Brightness Issues:
- Use the 'Brightness-' and 'Brightness+' buttons on the HDMI board to adjust the display brightness.
- Ensure the power supply provides sufficient current (2A recommended).
One Screen Not Working:
- Check the flexible flat cable connection for the affected screen to ensure it is securely and correctly connected to the green adapter board and the main HDMI board.
- Verify the screen itself is not damaged.
7. User Tips
- Power Supply: Always use a stable 5-12V/2A USB Type C power supply for optimal performance and to avoid flickering or insufficient brightness.
- Cable Management: When setting up, ensure the flexible flat cables are not bent sharply or under tension to prevent damage.
- Testing: Before final installation in a project, test the display with a known working video source to confirm functionality.
- Heat Dissipation: While the board is generally low power, ensure adequate airflow if integrating into an enclosed space, especially for prolonged use.
8. Warranty and Support
For warranty information and technical support, please refer to the official Surenoo Display website or contact your point of purchase. Keep your purchase receipt as proof of purchase.
