1. Introduction
The AV Access iDock C20 is a versatile 2x1 Dual USB-C KVM Switch Docking Station designed to enhance your workspace efficiency. It allows two laptops to share two monitors and multiple peripherals, providing a seamless switching experience. This manual will guide you through the product's features, setup, operation, and troubleshooting.
2. Package Contents
Before proceeding with the installation, please verify that all items listed below are included in your package:
- Switch Docking x 1
- Power Adapter (20V/10A) x 1
- USB-C to USB-C cable (USB 3.2 Gen 2x1, 1m) x 2
- User Manual x 1
3. Features
- Dual USB-C 2x1 KVM Switch Docking Station with Dual Monitor support.
- Two 4K@60Hz outputs for dual monitors KVM application.
- Two full-featured USB-C inputs supporting dual 4K@60Hz video transmission, USB 3.0 data, and 60W charging.
- USB-C input supports DP MST mode with dual 4K@60Hz outputs.
- Supports high refresh rates such as 240Hz, 165Hz, and 144Hz.
- Supports resolutions including 1080P@240Hz/165Hz/144Hz/60Hz, 2560x1440@144Hz/120Hz/60Hz, 4K@60Hz and other resolutions.
- Supports automatic wake-up function, which automatically wakes up the standby computer when switching.
- Supports multiple peripheral ports, including:
- One USB-C data-only port (up to 5Gb/s, 1.5A power output) data transmission.
- Two USB 3.0 ports (up to 5Gb/s, 1A power output).
- Four USB 2.0 ports (up to 480Mb/s).
- One CTL port for extended button control device connection.
- One LAN port for 1Gb Ethernet performance.
- One SDXC card slot (up to 104MB/s).
- One 3.5 mm composite headphone jack.
- No driver is required, plug and play.
4. Product Overview (Panel Layout)
4.1 Front Panel

Figure 1: Front Panel Layout
- USB-A (USB 2.0): For connecting peripherals like keyboard and mouse.
- 3.5mm composite headphone jack: For audio output to headphones.
- SDXC card slot: For accessing data from SD cards.
- USB-C: For charging or data transfer, compatible with cellphones or iPads.
- Power (LED): Indicates the power status of the device.
- Input Channel (LED): Indicates the currently selected input channel.
- Button (Switch): Used to switch between connected laptops.
4.2 Rear Panel

Figure 2: Rear Panel Layout
- POWER IN (20V 10A): Connect the provided power adapter here.
- HDMI OUT (Dual 4K): Connect your monitors to these ports.
- USB-C IN: Connect your laptops to these USB-C ports.
- 1G LAN (Ethernet): For network connectivity to both connected laptops.
- USB-A (USB 3.0): For high-speed data transfer devices like hard drives.
- CTL: For connecting an extended button control device.
- USB-A (USB 2.0): Additional USB ports for peripherals.
5. Setup and Connection
The iDock C20 simplifies your dual-laptop, dual-monitor setup. Follow these steps for proper connection:
5.1 Connection Diagram

Figure 3: Typical Connection Diagram
5.2 Step-by-Step Setup
- Power Connection: Connect the provided 20V/10A power adapter to the 'POWER IN' port on the rear panel of the iDock C20.
- Monitor Connection: Connect your two monitors to the 'HDMI OUT1' and 'HDMI OUT2' ports on the rear panel using HDMI 2.0 or above cables.
- Laptop Connection: Connect each of your two laptops to the 'USB-C IN1' and 'USB-C IN2' ports on the rear panel using the provided USB-C to USB-C cables. Ensure your laptops support DP alt mode and DP MST mode for full functionality.
- Peripheral Connection:
- Connect your keyboard and mouse to the USB-A (USB 2.0) ports on the front panel.
- For high-speed data transfer, connect hard drives or other devices to the USB-A (USB 3.0) ports on the rear panel.
- Connect your headphones to the 3.5mm audio jack on the front panel.
- For network access, connect an Ethernet cable to the 'LAN' port on the rear panel.
- Use the front USB-C port for charging mobile devices or additional data transfer.
- Power On: Ensure all connections are secure. The Power LED on the front panel should light up.
5.3 Setup Demonstration Video
Video 1: Product demonstration showing setup and switching between two laptops.
6. Operating Instructions
6.1 Switching Between Laptops
To switch between the two connected laptops, simply press the 'Button (Switch)' on the front panel of the iDock C20. All connected peripherals (keyboard, mouse, monitors, etc.) will switch to the selected laptop within a few seconds.
6.2 Display Modes and Resolutions

Figure 4: High Refresh Rate Display Capabilities

Figure 5: Advanced EDID Emulation Function

Figure 6: Multiple Display Modes for macOS and Windows
The iDock C20 supports dual 4K@60Hz outputs and various high refresh rates. The built-in MST function allows output to two screens. The advanced EDID emulation function ensures that desktop icons and windows remain in place after switching, preventing rearrangement, flickering, or windows cramming to the main monitor.
Note on macOS: The USB-C port of a MacBook typically does not support extended display mode for multiple external monitors. It usually mirrors the display or extends to a single external monitor. Please check your MacBook's specifications for multi-monitor support.
Note on Windows: With Windows, the two monitors can display one computer at a time, supporting various extended and mirrored configurations.
6.3 Power Delivery and Charging
The USB-C inputs provide 60W charging to keep your laptops powered. The KVM Docking can charge two connected USB-C laptops regardless of which one is currently selected.
6.4 LAN Connectivity
The single LAN port provides network connectivity to both connected USB-C laptops, ensuring a constant and stable connection for both systems, regardless of which laptop is active.
6.5 Clamshell Mode
The iDock C20 supports an automatic wake-up function, allowing you to use your laptops in clamshell mode (closed lid) while connected to external monitors, saving desk space.
7. Specifications
| Category | Parameter | Description |
|---|---|---|
| Technical | Input | USB-C supports USB 3.2 Gen 2x1 standard, up to 20Gb/s, with 60W Charging, USB 3.0 (up to 5Gb/s), and Dual 4K@60Hz video (MST) |
| Output | Two HDMI 2.0 outputs with HDCP 2.2 | |
| Resolution Support | USB-C: Up to two 4K@60Hz outputs Supports 1080P@240Hz/165Hz/144Hz/60Hz, 2560x1440@144Hz/120Hz/60Hz, 4K@60Hz and other resolutions. | |
| Audio Support | HDMI | Fully supports audio formats in HDMI 2.0 specification, including PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, and DTS:X |
| Headset | Stereo | |
| Peripheral and Expansion | USB-C x1 | Up to 5Gb/s, 1.5A power output. |
| USB-A x6 | Two USB 3.0 ports (up to 5Gb/s, 1A power output) Four USB 2.0 ports (up to 480Mb/s) | |
| SDXC card slot | Up to 104MB/s, maximum support 2TB. | |
| LAN | RJ-45 connector, support for 1Gb Ethernet performance | |
| Control | Switching | Button switch, extended button control |
| General | Operating Temperature | 0°C ~ 45°C (32°F to 113°F) |
| Storage Temperature | -20°C ~ 70°C (-4°F to 158°F) | |
| Humidity | 10% to 90%, non-condensing | |
| ESD Protection | Human-body Model: ±8kV (Air-gap discharge)/±4kV (Contact discharge) | |
| Power Supply | DC 20V/10A | |
| Dimensions (W x H x D) | 168mm x 47.4mm x 110mm / 6.61" x 1.87" x 4.33" | |
| Product Weight | 0.67kg / 1.48lbs |
8. Troubleshooting
8.1 The device doesn't work.
- Check if the POWER LED is lit on the front panel.
- Ensure you are using the 20V/10A power supply provided with the accessories. An unsuitable or insufficient power supply may damage the product.
8.2 No dual 4K videos simultaneously.
- Ensure you are using the USB-C to USB-C cable provided in the accessories.
- Ensure your USB-C notebook supports DP alt mode and DP MST mode.
- Latest Mac computers with an ARM processor only support DP SST mode, meaning two duplicate contents will be displayed.
- For Windows laptops, use one with a discrete graphics card. Intel integrated graphics performance might be insufficient, leading to unstable or flickering videos.
- For notebooks with GeForce RTX 20 series or above graphics cards, we recommend setting up two 4K@60Hz resolutions.
- For notebooks with GeForce GTX10 series graphics cards, we recommend setting up two 1080P@60Hz resolutions.
- For notebooks with integrated graphics cards, do not set the resolution of both monitors to exceed 1080P@60Hz.
- If one monitor displays a higher resolution and the other only displays 800x600 or below, adjust the higher resolution monitor downward to 1080P@60Hz. The other monitor can then choose a larger resolution.
8.3 Wireless mouse and keyboard are not responsive.
USB-IF has confirmed that USB 3.0 can interfere with 2.4G dongle receivers used by wireless mice and keyboards. If you experience this, check if a USB 3.0 device is connected next to your wireless dongle. Connect the USB 3.0 device to an interface far away from the wireless dongle, for example, connect the wireless dongle and USB 3.0 devices to opposite sides of the iDock C20.
8.4 Video flickering/unstable.
- Ensure you are using the correct cables. For HDMI, use HDMI 2.0 or above cables.
- For USB-C, use the built-in cables or USB-IF-certified USB 3.2 Gen 2 cables that support a 10Gb/s data rate.
9. User Tips
- The iDock C20 is designed for plug-and-play functionality, making setup straightforward.
- The KVM switch effectively maintains network connectivity and provides sufficient power to both connected laptops, even when switching.
- For optimal performance and to avoid interference with wireless peripherals, ensure USB 3.0 devices are connected to ports away from wireless dongles.
- While the manual lists specific resolutions, the device supports "other resolutions." If you are using a monitor with a resolution like 3440x1440, verify compatibility with your laptop's graphics card and adjust settings as needed, referring to the troubleshooting section for guidance on resolution conflicts.
10. Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official AV Access website or contact their customer service directly. Keep your purchase receipt for warranty claims.