1. Introduction
Thank you for choosing the TOZO anybuds TWS Earbuds. These wireless Bluetooth headphones are designed to provide a superior audio experience with features like HD calls, noise cancellation, ergonomic comfort, IPX5 water resistance, and intuitive touch controls. This manual will guide you through the setup, operation, and maintenance of your new earbuds.
2. Setup
2.1 Initial Charging
Before first use, ensure both the earbuds and the charging case are fully charged. Place the earbuds into the charging case. Connect the charging case to a power source using a compatible USB-C cable. The indicator lights on the case will show the charging status.
2.2 Pairing with Your Device
- Open the charging case. The earbuds will automatically power on and enter pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for "anybuds" in the list of available Bluetooth devices.
- Select "anybuds" to connect. Once connected, you will hear a confirmation tone, and the earbud indicator lights will turn off or show a steady light.
2.3 Wearing the Earbuds
For optimal sound quality and comfort, choose the correct size eartips and ensure a secure fit.
- The anybuds come with multiple size eartips. Try different sizes to find the best fit for your ears.
- Insert the earbuds into your ear canal and gently twist them to lock them in place. The ergonomic design is intended for comfortable and stable wear.
3. Operating Instructions
3.1 Touch Controls
The anybuds feature intelligent touch controls for easy management of your audio and calls.
- Play/Pause: Single tap on either earbud.
- Voice Assistant: Tap and hold (duration not specified, typically 2 seconds) on either earbud.
- Answer Call: Single tap on either earbud during an incoming call.
- Hang Up Call: Single tap on either earbud during a call.
- Previous Song: Double tap on the left earbud.
- Next Song: Double tap on the right earbud.
- Volume Up: Triple tap on the right earbud.
- Volume Down: Triple tap on the left earbud.
3.2 Power On/Off
- Power On: Open the charging case, and the earbuds will automatically power on.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically disconnect and power off.
4. Maintenance
4.1 Charging the Earbuds and Case
To maintain optimal battery life, regularly charge your earbuds and charging case.
- Earbuds: Place them in the charging case. They will charge automatically.
- Charging Case: Connect the case to a USB power adapter (5V/1A recommended) using the provided USB-C cable. The indicator lights will show the charging progress.
The earbuds offer approximately 10 hours of playback on a single charge, with the charging case providing an additional 25 hours, totaling up to 35 hours of playback.
4.2 Water Resistance
The anybuds are rated IPX5 waterproof, meaning they are protected against low-pressure water jets from any direction. This makes them suitable for workouts and light rain, but they are not designed for submersion in water.
- After exposure to sweat or water, wipe the earbuds dry before placing them back in the charging case to prevent damage to the charging contacts.
- Do not expose the charging case to water.
4.3 General Care
- Clean the earbuds and charging case regularly with a soft, dry cloth.
- Avoid using abrasive cleaners or solvents.
- Store the earbuds in their charging case when not in use to protect them and keep them charged.
5. Troubleshooting
5.1 Earbuds Not Pairing
- Ensure both earbuds are charged.
- Make sure Bluetooth is enabled on your device.
- Try placing the earbuds back in the case, closing the lid, waiting a few seconds, and then opening it again to re-enter pairing mode.
- If issues persist, try forgetting "anybuds" from your device's Bluetooth settings and re-pairing.
5.2 Only One Earbud Working
- Ensure both earbuds are charged.
- Place both earbuds back into the charging case, close the lid, and then open it again. This often re-syncs them.
- If necessary, perform a factory reset (refer to specific instructions if available, or try holding the touch area for an extended period while in the case, then re-pairing).
5.3 Poor Sound Quality
- Ensure the earbuds are properly seated in your ears and you are using the correct size eartips for a good seal.
- Clean any debris from the earbud mesh.
- Move closer to your connected device to avoid interference.
6. Specifications
The following table details the technical specifications of the TOZO anybuds TWS Earbuds:
| Feature | Specification |
|---|---|
| Brand Name | TOZO |
| Model Name | anybuds |
| Communication | True wireless (Bluetooth) |
| Bluetooth Version | 5.3 |
| Wireless Type | Bluetooth |
| Maximum Wireless Range | 10m-20m |
| Vocalism Principle | Dynamic |
| Number Of Drivers | 2 |
| Driver Diameter | 6mm |
| Impedance Range | up to 32 Ω |
| Frequency Response Range | 20 - 20000Hz |
| Battery life up to | 5 hours (earbuds) |
| Earbud Battery Capacity | 50mAh |
| Charging Case Capacity | 300mAh |
| Charging Method | Charging case (Type-C connector) |
| Charging Time | 1.5 hours |
| Waterproof Rating | IPX5 |
| With Microphone | Yes |
| Sound Isolating | Yes |
| Active Noise-Cancellation | No |
| Volume Control | Yes |
| Control Button | Yes (Touch Control) |
| Material | PC, ABS |
| Weight | 35g |
| Connectors | Type c |
| Support APP | No |
| Support Memory Card | No |
7. Warranty and Support
TOZO is committed to providing high-quality products and customer satisfaction. Your anybuds TWS Earbuds come with several service commitments:
- Free Returns: Enjoy free returns within 90 days of purchase.
- Fast Delivery Guarantee:
- Receive a $1.00 coupon code if delivery is delayed.
- Full refund if the package is lost.
- Full refund if items are damaged upon arrival.
- Full refund if no delivery within 20 days.
- Security & Privacy: Your personal details are protected and not shared with third parties without consent. Payments are secure.
For further assistance or support, please refer to the official TOZO website or contact customer service.
