Tesla 1086017-S0-A 1086016-S0-A

Contents

User Manual

Front Fender Bracket for Tesla Model 3 (2017-2021)

Models: 1086017-S0-A, 1086016-S0-A

1. Product Overview

This product is an automotive fender liner support plate, serving as a core load-bearing and fixing component for the vehicle's fender system. It is designed for various family cars and SUV models, specifically compatible with Tesla Model 3 and Model Y vehicles manufactured between 2017 and 2021.

The bracket is integrally formed from high-strength stamped steel plate and features electrophoretic anti-rust treatment on its surface, ensuring both load-bearing capacity and durability. Its primary function is to securely fix the fender and distribute forces, preventing loosening, deformation, or detachment due to bumps, impacts, and sand during driving. Additionally, it aids in dust-proof, mud-proof, and stone-impact-proof functions, thereby protecting the vehicle body paint and chassis components from damage.

The product adheres strictly to the "General Technical Conditions for Automotive Stamped Parts" (GB/T 13914-2002) standard, offering a solid structure, impact resistance, and corrosion resistance. It is designed for complex driving environments, including rainy days, muddy roads, and gravel roads, providing wear-resistant, weather-resistant, and long-lasting stable support for the fender.

Front Fender Brackets for Tesla Model 3

Image 1.1: Front Fender Brackets (Left and Right) for Tesla Model 3.

Video 1.1: Product overview showcasing the fender brackets.

2. Specifications

Parameter Type Specific Parameters
Material High-strength cold-rolled steel plate (thickness 1.2-1.5mm, tensile strength ≥345MPa); Surface: Cathodic electrophoretic anti-rust treatment (anti-rust layer thickness ≥15µm), salt spray resistance ≥1000 hours.
Working Temperature -40°C to 120°C
Fitment Front/rear fenders, left/right sides, compatible with Tesla Model 3/Model Y (2017-2021). Features precise holes for a perfect fit.
Load-bearing Capacity Static load-bearing ≥500N, Dynamic load-bearing ≥300N
Service Life ≥100,000 kilometers (under normal use conditions)
OEM Part Numbers 1086017-S0-A (Left), 1086016-S0-A (Right)

For additional details, you may refer to the official User Manual (PDF).

3. Setup and Installation

Important: Installation should be performed by professional maintenance personnel or Tesla officially authorized personnel to ensure safety and proper function.

  1. Preparation: Before starting, turn off the vehicle's main power supply. Lift the vehicle and secure it firmly to ensure operational safety.
  2. Clean Installation Area: Thoroughly clean any dust, sand, or rust from the fender installation position on the vehicle chassis. Inspect the installation holes to ensure they are not deformed or blocked.
  3. Verify Compatibility: Confirm that the support plate model (1086017-S0-A for left, 1086016-S0-A for right) is compatible with your vehicle model and the intended installation position (front/rear, left/right).
  4. Positioning: Align the support plate with the installation position, adjusting it to ensure a close and tight fit with both the fender and the chassis.
  5. Secure Fastening: Use the provided matching high-strength bolts. Tighten the bolts sequentially with a torque wrench to 35-40 Nm. This ensures firm fixation and prevents looseness.
  6. Post-Installation Check: After securing the support plate, install the fender. Test the load-bearing performance of the support plate and check for any shaking or abnormal noise. Ensure the fender is fixed stably without affecting vehicle driving.
Left Front Fender Bracket

Image 3.1: Left Front Fender Bracket (Model 1086017-S0-A).

Right Front Fender Bracket

Image 3.2: Right Front Fender Bracket (Model 1086016-S0-A).

4. Maintenance

4.1 Regular Inspection

  • Every 5,000 kilometers: Inspect the fixing bolts of the support plate for looseness or absence. Check the surface of the support plate for rust, deformation, or breakage. Verify that the fit with the fender and chassis remains tight to ensure normal load-bearing and fixing function.

4.2 Cleaning and Protection

  • Every car wash: Clean any sand and debris from the surface of the support plate and the installation position. This prevents rust caused by sand accumulation.
  • Avoid high-pressure washing: Do not directly flush the bolt connections with a high-pressure water gun, as this can damage the anti-rust layer and shorten its lifespan.

4.3 Anti-rust Maintenance

  • Every 10,000 kilometers: Apply a special anti-rust agent to the surface of the support plate and the bolt connections. This is especially important after driving in rainy or muddy conditions. Timely cleaning and maintenance enhance corrosion resistance and prevent rust.

4.4 Timely Replacement

  • If the support plate shows severe rust, deformation, breakage, or if the bolts are loose and cannot be fixed, or if the fit with the fender and chassis is no longer tight, replace the original support plate and matching bolts promptly. This prevents the fender from loosening and falling off, ensuring driving safety.

5. Troubleshooting

Fault Phenomenon Simple Troubleshooting Method
Support plate loose or abnormal noise Check if the fixing bolts are loose; re-tighten them with a torque wrench at 35-40 Nm. Check if the bolts are worn or missing, and replace with matching high-strength bolts if necessary. Clean any debris at the installation position to ensure the support plate fits closely with the chassis.
Support plate rust Gently polish the rusted part with fine sandpaper, clean the rust, and apply special anti-rust agent. If the rust is severe and affects load-bearing capacity, directly replace the original support plate to avoid fracture risk.
Fender loose or falling off Check if the support plate is deformed or broken, and replace it in time if damaged. Check if the connection between the support plate and the fender is firm, re-tighten the fixing bolts, and adjust the fender position to ensure a close fit.
Support plate deformation or poor fit Check if the support plate has been subjected to external impact. Slight deformation can be gently corrected (avoid excessive force that could lead to fracture). If the deformation is severe, replace the original support plate to ensure a precise fit with the chassis and fender.

6. Warranty and Support

6.1 Warranty Period

The warranty period is 1 year or 50,000 kilometers from the date of installation, whichever comes first. This warranty covers quality problems of the product itself, such as support plate rust, deformation, fracture, or bolt damage.

6.2 Official Service Hotline

For support, inquiries, or to locate the nearest authorized service center, please contact the Tesla Official Service Hotline: 400-910-0707.

6.3 Support Services

Through the official service channels, you can:

  • Query the nearest authorized service center.
  • Obtain information on product-adapted models.
  • Receive guidance on support plate installation and replacement methods.
  • Consult on anti-rust maintenance and other related matters to ensure safe and reliable use of the product.

7. User Tips

  • Always ensure the vehicle is safely supported and powered off before attempting any installation or maintenance.
  • Regularly check the fender brackets, especially after driving on rough terrain or in harsh weather, to catch any issues early.
  • Using a torque wrench for bolt tightening is crucial to prevent over-tightening (which can damage threads or components) or under-tightening (which can lead to looseness).
  • Consider applying a protective coating or wax to the visible parts of the bracket and surrounding areas to enhance long-term corrosion resistance.

© 2023 Zenith Auto Parts Store. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.