PROGAGA PG370

Contents

PROGAGA Full HD 1080P PG370 Mini Projector User Manual

Model: PG370

Introduction

This manual provides detailed instructions for the safe and efficient operation of your PROGAGA PG370 Mini Projector. Please read this manual thoroughly before using the device and keep it for future reference.

For a comprehensive guide, you may also refer to the official user manual PDF: PROGAGA PG370 User Manual (PDF).

Safety Instructions

Read all instructions before you use this device. Do not make any changes or create settings that are not described in this manual. If physical damage, loss of data or damage is caused by failure to follow instructions, the warranty does not apply.

  1. To reduce the risk of fire or electric shock, do not expose the device to rain or moisture. Objects filled with liquids, such as vases, should not be placed on this device.
  2. Do not place this device on soft surfaces such as tablecloths or carpets, otherwise the device could be a fire hazard.
  3. Do not place this device in areas susceptible to excessive dust and dirt or near any appliance generating a strong magnetic field.
  4. To prevent overheating, do not block or clog the ventilation holes.
  5. Never place this device in a confined space. Always leave enough space around this device for ventilation.
  6. Protect this device from overexposure to direct sunlight, heat, large temperature fluctuations and moisture. Avoid extreme temperatures.
  7. When this device is running for a long period of time, the surface may become hot. Shut it down immediately and unplug the charger. Resume operation after this device has cooled down.
  8. Always handle this device with care. Avoid touching the lens. Do not allow children to handle the device without supervision.
  9. Use attachments or accessories specified by the manufacturer only.
  10. Avoid extreme vibration as it may damage the internal components.

Package List

  • Projector x 1
  • Remote Control x 1 (Batteries are not included)
  • Adapter x 1
  • Projector User Manual x 1

Product Overview

The PROGAGA PG370 is a compact and portable mini projector designed for home theater and entertainment. It features native 1080P resolution with 4K decoding support, 450 ANSI Lumens brightness, and a 10000:1 contrast ratio. The projector runs on Android 11.0, supports dual-band WiFi 6 and BT 5.4, and includes a 5W speaker.

PROGAGA PG370 Mini Projector features diagram
Figure 1: Key features of the PROGAGA PG370 Mini Projector including 4K decoding, 450 Ansi Lumens, 0.8:1 Throw ratio, Auto Focus, Keystone, 180° Rotation, WiFi 6, Android 11.0, BT 5.4, 1+8G Memory, 5W Speaker, and easy dust cleaning.

Interfaces

The projector includes the following input/output ports:

  • HDMI Input
  • USB Input
  • DC In (Power)
  • 3.5mm Stereo Jack (Earphone Out)
PROGAGA PG370 Mini Projector front and rear view with ports labeled
Figure 2: Front view of the projector showing the lens and auto-focus sensor. Rear view showing HDMI, USB, DC In, and 3.5mm Jack ports.

Portability and Adjustability

The PG370 is a mini portable projector, comparable in size to a smartphone, and features a stand that allows for 180-degree rotation for flexible projection angles.

Video 1: Product demonstration showcasing the projector's size, adjustable stand, auto-focus, and image quality.

Remote Control

The projector comes with a remote control for easy navigation and settings adjustment. (Batteries are not included).

Remote Control Buttons:

  • On/Off: Power switch.
  • Focus: Adjust image focus.
  • OK: Confirm selection.
  • Mute: Mute/unmute audio.
  • Switch to mouse control: Toggle mouse mode.
  • Up/Down/Left/Right: Navigation buttons.
  • Menu: Access menu options.
  • Return: Go back to the previous screen.
  • Volume - / Volume +: Adjust volume.
  • Home: Go to the home screen.

Attention:

  1. Do not submerge the remote control in water.
  2. Do not put the remote control near fire or in wet or hot places.
  3. Do not use old and new batteries together in the remote control.
  4. Please take the batteries out if not using the remote control for a long time to avoid battery leakage.
  5. Please point the remote control toward the IR receiver.
  6. Please use the remote control within 6 meters distance and 30 degree angle.

Getting Started

  1. Plug the power cable into the projector.
  2. Press the power button to turn on the projector.
  3. Use the manual focus by pressing the "Focus" button on the remote control to achieve the best clarity.

Tips: Make sure the projector is horizontal to the projector screen for optimal image quality.

Operating Instructions

Homepage Status Bar Icons

  • Clear memory shortcut: When the system is stuck or too many applications are opened, click this icon to clear background processes.
  • Wallpaper shortcut: Support to change the background picture.
  • Bluetooth shortcut: Turn to Bluetooth settings.
  • Network shortcut: Turn to network settings.

Network Setting

Go to Settings > Network Settings > WiFi Switch. Turn on the WiFi Switch. Choose your desired network and type the password to connect.

Bluetooth Setting

Go to Settings > Bluetooth > Bluetooth Settings. Turn on the Bluetooth Switch. Click "Search for Bluetooth devices" and pair with the device you want to connect to.

Projection Settings

Access Settings > Projection Settings to configure display settings, installation mode, device mode, digital zoom, screen zoom, auto focus, initial angle correction, manual keystone, and reset keystone correction.

Auto focus and zoom function diagram
Figure 3: Diagram illustrating the auto focus and zoom function (80%-100%) of the projector, along with auto vertical keystone correction.

The projector supports a throw ratio of 0.8:1, allowing for a 150-inch screen from a short distance.

Projection ratio and screen size diagram
Figure 4: Illustration of projection distances for various screen sizes (40" at 0.6m, 100" at 1.5m, 150" at 2.8m) with a 0.8:1 throw ratio.

Display Settings (Brightness, Contrast, etc.)

Within Settings > Projection Settings > Display Settings, you can adjust the Picture Mode (Standard/Custom/Vivid/Cinema). In Custom mode, you can fine-tune Brightness, Contrast, Hue, Saturation, and Sharpness.

Language and Keyboard

Navigate to Settings > Language and Keyboard to change the system language and input keyboard settings.

Date and Time Settings

Adjust the date, time, time zone, and hour format under Settings > Date and time settings.

Application Settings

In Settings > Application Settings, you can check app information and clear app data.

Other Settings

Under Settings > Other Settings, you can set external input at boot, button sound, screen saver, scheduled power off, restore factory settings, and account settings.

File Management

Insert a U disk (USB drive) into the projector. Click the "FileManager" icon on the homepage. The content of the U disk (video, audio, picture, etc.) can then be accessed and played.

Wireless Mirroring (Screen Sharing)

The projector supports Android Wireless Mirroring (Transcreen App), Miracast Mirroring, and AirPlay Mirroring.

Android Wireless Mirroring (Transcreen App)

  1. Enter the Transcreen app on your mobile phone.
  2. Ensure both your mobile phone and the projector are connected to the same network.
  3. Search for the projector device name on your phone and click connect to share your screen.
  4. If you don't have the app, follow the tips on the screen, go to https://transcreen.app and download the Transcreen app.

Miracast Mirroring

  1. Click "START" on the projector screen to enter the Miracast mirroring interface.
  2. Ensure both your mobile phone and the projector are connected to the same network.
  3. Follow the tips on the screen, and use your phone's mirroring function to search for the device and share your screen.

AirPlay Mirroring

  1. Ensure both your mobile phone and the projector are connected to the same network.
  2. Click "Screen Mirroring" on your iPhone/iOS device.
  3. Find the projector device name and select it to share your screen.
Wireless connectivity diagram for Android and iOS
Figure 5: Diagram showing wireless connectivity options including 2.4G/5G WiFi and Bluetooth 5.4, compatible with Android and iOS devices for screen mirroring.

Maintenance

Cleaning Method

  1. Get a screwdriver ready and unscrew the screws on the bottom cover.
  2. Clean the projector's internal components (e.g., fan, dust filter) using a cotton swab or soft brush.
  3. Reinstall the bottom cover after cleaning.

Regular cleaning helps maintain optimal performance and extends the lifespan of your projector.

Troubleshooting

Blurry Image

  • Go to Settings > Projection Settings > Auto Four Keystone Correction. Turn on Auto Four Keystone Correction or enter Manual Keystone to adjust the image.
  • Press the "Focus" button on the remote control to get the best clarity.

No Image / No Signal

  • Ensure all cables (HDMI, USB, Power) are securely connected.
  • Verify the correct input source is selected in the projector's settings.
  • Check if the connected device (laptop, streaming stick) is powered on and outputting a signal.

Overheating

  • Ensure ventilation holes are not blocked.
  • Place the projector in a well-ventilated area.
  • If the projector becomes hot during prolonged use, shut it down and allow it to cool before resuming operation.

Specifications

Feature Specification
Brand NamePROGAGA
ModelPG370
Optical Resolution1920x1080dpi (Native 1080P, support 4K Decoding)
Brightness11000 Lumens (450 Ansi Lumens)
Contrast Ratio10000:1
SystemAndroid 11
WiFi2.4G / 5G / WiFi 6
BluetoothBT5.4
Projected Dimension40-150 inches
Projection Distance0.6-2.8m
Projection TechnologyLED
Light SourceLed Light
Screen Scale4:3/16:9
Zoomx 1.2 (Digital Zoom 80%-100%)
Keystone CorrectionElectronic Correction, Auto Correction
Built-in SpeakerYes (5W)
Input/Output3.5mm Earphone Out, HDMI, POWER, USB
Power (W)48w
Power SourceAC (100-240V / 50-60Hz)
Weight1.0KG
PortableYes
Remote controller includedYes
Inbox adaptorYes
CertificationCE, FCC, RoHS
Warranty1 Year

User Tips

  • For the best viewing experience, use the projector in a dark room.
  • Experiment with different projection distances to find the optimal screen size for your space.
  • Utilize the auto-focus and keystone correction features for quick and easy setup.
  • Connect external speakers via Bluetooth or the 3.5mm audio jack for enhanced sound quality.
  • Regularly clear memory and app data through the Application Settings to maintain smooth performance.

Warranty and Support

The PROGAGA PG370 Mini Projector comes with a 1-year warranty from the date of purchase.

For further assistance, troubleshooting, or warranty claims, please refer to the official user manual PDF or contact PROGAGA customer support.

Official User Manual (PDF): PROGAGA PG370 User Manual


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.