1. Product Information
- Product Name: LED Wall Light
- Model: FLXDL1100
- Batch/Serial Number: BD-66
- Manufacturer: Shenzhen Qiheng Power Supply Co., Ltd
- Manufacturer Address: uangdongsheng shenzhenshi baoan xiqujieweiyuanhuixinandiergongye12haolou
- Manufacturer Tel: +86 15018027687
2. Safety Warnings & Precautions
- IMPORTANT: Please test the lamp before installation to ensure it is working properly. Install only if safety is guaranteed.
- Connect the lamp to 110V/220V voltage. DO NOT use 380V voltage.
- Always turn off the power supply before adjusting the lamp balance or cleaning the lamp.
- Do not use corrosive liquids or abrasive cleaners to clean the lamp.
- Ensure all electrical connections are secure and comply with local electrical codes.
3. Setup & Installation
Tools Required (Not Included):
- Screwdriver (Phillips/Flathead)
- Drill
- Pencil
- Measuring Tape
- Wrench/Spanner (if applicable)
Installation Steps:
- Power Off: Ensure the main power supply to the installation area is turned off at the circuit breaker.
- Marking: Use a pencil to mark the desired mounting points on the wall, aligning with the lamp's mounting bracket.
- Drilling: Drill holes at the marked points suitable for the wall anchors (if required) and mounting screws.
- Mounting Bracket: Secure the lamp's mounting bracket to the wall using appropriate screws and anchors.
- Wiring: Connect the household electrical wires to the lamp's power driver wires. Typically, connect live (L) to live, neutral (N) to neutral, and ground (GND) to ground. Ensure all connections are secure and insulated.
- Attach Lamp Body: Carefully attach the lamp body to the mounted bracket, ensuring it is securely fastened.
- Power On: Restore power at the circuit breaker and test the lamp's functionality.
4. Operating Instructions
Power On/Off:
Turn the lamp on or off using your standard wall switch.
Dimming and Color Temperature Adjustment:
This lamp features 3-color dimming and is controllable via remote control or a dedicated app (if provided by the seller). The available color temperatures are:
- Warm White: 2800-3200K
- Neutral Light: 3800-4200K
- Cold White: 6000-6500K
Use the remote control or app interface to switch between these three colors and adjust the brightness level to your preference.
Video: Product showcase demonstrating the wall lamp in various settings and its 3-color dimming feature.
5. Maintenance
- Cleaning: Always turn off the power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the lamp's surface. Do not use abrasive cleaners, solvents, or corrosive liquids, as these can damage the finish.
- Bulb Replacement: This lamp uses integrated LED technology. The LED light source is not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.
- Inspection: Periodically check the lamp for any loose connections or damage. If any damage is found, discontinue use and contact support.
6. Troubleshooting
- Lamp Does Not Turn On:
- Check if the power supply is connected correctly and if the wall switch is on.
- Verify that the circuit breaker has not tripped.
- Ensure all wiring connections are secure.
- Dimming or Color Change Not Working:
- If using a remote control, check its batteries.
- Ensure the remote control or app is properly paired with the lamp (refer to specific remote/app instructions if available).
- Try power cycling the lamp (turn off at the switch for 10 seconds, then turn back on).
- Flickering Light:
- Ensure the voltage supply is stable and within the specified range (90-260V).
- Check for loose wiring connections.
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Dfiolk |
| Model Number | FLXDL1100 |
| Item Type | Wall Lamps |
| Material | Copper, Acrylic |
| Light Source | LED bulbs (Integrated) |
| Is Bulbs Included | Yes |
| Is Dimmable | Yes (3-Color Dimming via Remote/App) |
| Voltage | AC 90-260V (110V/220V compatible) |
| Power Source | AC |
| Luminous Flux | 249-2000 Lumens |
| Lighting Area | 5-10 square meters |
| Application | Foyer, Daily Lighting |
| Installation Type | Wall Mounted |
| Installation Method | Self-contained |
| Lifespan | Over 50,000 hours |
| Warranty | 2 Years |
| Color Temperature | Warm White (2800-3200K), Neutral Light (3800-4200K), Cold White (6000-6500K) |
| Certifications | CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, ROHS, SAA, UL, VDE, EAC |
Dimensions:
- 60CM Model: Length 60cm * Width 7cm * Wall Spacing 4cm, Power: 7W, Applicable Space: 3-8 m²
- 80CM Model: Length 80cm * Width 7cm * Wall Spacing 4cm (Power and space may vary slightly)
- 100CM Model: Length 100cm * Width 7cm * Wall Spacing 4cm (Power and space may vary slightly)

Image: Dimensions diagram for the 60cm model, showing length, width, material, power, and applicable space.
8. User Tips
- Ambiance Control: Experiment with the 3-color dimming feature to create different moods. Warm white is great for a cozy atmosphere, while cold white is ideal for brighter task lighting.
- Convenient Adjustment: Utilize the remote control or app for easy adjustments of brightness and color temperature from anywhere in the room.
- Placement: Consider installing multiple lamps for a more dramatic effect or to illuminate larger wall spaces evenly.

Image: Gold 60CM LED wall lamp illuminating a modern living room.

Image: Gold 60CM LED wall lamp providing ambient light in a modern bedroom.

Image: Close-up view of the durable acrylic lampshade.
9. Warranty & Support
Warranty:
This Dfiolk LED Wall Lamp comes with a 2-Year Warranty from the date of purchase, covering manufacturing defects under normal use.
Manufacturer Support:
- Company: Shenzhen Qiheng Power Supply Co., Ltd
- Telephone: +86 15018027687
EU Authorized Representative:
- Responsible Person: Sophie Dupont
- Address: bis rue Abel 75012 Paris, France
- Telephone: +34910602659
- E-mail: SophieDupont@proconseilfr.cc