dawupine dcb200

Contents

DCB200 10X21700 Lithium Battery Case Assembly Manual

For Dewalt 18V/20V 8Ah Tools

Important Safety Information & Warnings

WARNING: This product is a DIY (semi-manufactured) kit. It requires professional knowledge and experience in electronics and battery assembly. Improper assembly can lead to serious injury, fire, or damage to property. Please read all instructions carefully before proceeding.

  • Professional Knowledge Required: To use this product, you need to have professional knowledge and experience in handling lithium-ion batteries and related electronics.
  • Required Tools: You must have 21700 POWER Li-ion batteries (not included) and specialized tools such as spot welding machines, soldering irons, multimeters, and suitable chargers.
  • No After-Sales Service: This product is sold without after-sales service, returns, or refunds. Purchase with caution and only if you are confident in your ability to assemble it correctly.
  • Component Variations: The PCB color (blue, white, green, red, etc.), PCB design, and LED color (red, green, blue) may vary due to supply chain and processing technology changes. Functionality and performance are guaranteed to be the same. Labels may also differ.
  • Battery Voltage Pre-Check: Ensure that the voltage of each 21700 cell is identical before welding the PCB.

Product Overview

This kit provides the necessary components to build a 10X21700 lithium-ion battery pack compatible with Dewalt 18V/20V tools, designed to achieve an 8Ah capacity when assembled with appropriate 21700 cells. The kit includes a plastic case, a Battery Management System (BMS) PCBA, a battery level indicator board, and other essential parts for assembly.

Main product components including case parts, BMS, battery holder, stickers, and contacts.
Figure 1: Overview of the DCB200 10X21700 Battery Case Kit Components.
Assembled battery case with approximate dimensions and a comparison diagram of 21700 vs 18650 battery cells.
Figure 2: Assembled Battery Case Dimensions (approx. 13.5cm x 7.5cm x 7cm) and 21700 Cell Comparison.

Setup and Assembly Instructions

This section outlines the steps for assembling your DCB200 battery case. Ensure you have all necessary tools and safety equipment before beginning.

Required Materials (Not Included)

  • 10x 21700 Lithium-Ion Battery Cells (ensure all cells are balanced to the same voltage before assembly)
  • Spot Welding Machine
  • Soldering Iron and Solder
  • Multimeter
  • Suitable Lithium-Ion Battery Charger
  • Safety Glasses and Gloves

Kit Contents

Detailed layout of all components: top and bottom case, 10-cell holder, BMS, battery indicator board, wires, screws, and metal contacts.
Figure 3: Detailed view of all components included in the kit.
  • Top and Bottom Plastic Case Shells
  • 10-Cell Battery Holder
  • BMS (Battery Management System) PCBA
  • Battery Level Indicator Board
  • Connection Wires
  • Screws
  • Metal Battery Contacts
  • 8Ah 20V Stickers

Assembly Steps

  1. Prepare Battery Cells: Ensure all 10x 21700 lithium-ion cells are fully charged and balanced to the same voltage. This is critical for battery health and safety.
  2. Install Cells in Holder: Carefully place the 21700 cells into the provided 10-cell battery holder. Ensure correct polarity as indicated on the holder.
  3. Connect Cells to BMS: Using a spot welder, connect the battery cells in series according to the wiring diagram. Then, solder the balance leads from the battery pack to the designated points on the BMS PCBA.
  4. Connect Power Leads: Solder the main positive (B+) and negative (B-) power leads from the battery pack to the corresponding terminals on the BMS PCBA.
  5. Connect Indicator Board: Solder the wires from the battery level indicator board to the appropriate points on the BMS or main power leads, as shown in the diagram.
  6. Secure Components: Place the assembled battery pack, BMS, and indicator board into the bottom plastic case shell. Ensure all components are securely seated and wires are not pinched. It is recommended to glue down the BMS with the terminals to the base for added sturdiness.
  7. Close Case: Carefully align the top plastic case shell with the bottom shell and secure them using the provided screws.
  8. Apply Stickers: Affix the 8Ah 20V stickers to the assembled battery case. Note: Some users recommend gently trimming the edges of the sticker if it appears too large to prevent the case from twisting.
Close-up view of the BMS (Battery Management System) circuit board and the separate battery level indicator board with its button and LEDs.
Figure 4: Close-up of the BMS and Battery Level Indicator Board.
Wiring diagram illustrating how to connect the 10x 21700 battery cells in series to the BMS board and the battery level indicator board.
Figure 5: Essential Wiring Diagram for Battery Cells, BMS, and Indicator Board.

Operating Instructions

Once assembled, your custom 10X21700 battery pack can be used with compatible Dewalt 18V/20V power tools.

  1. Installation: Insert the assembled battery pack into your Dewalt 18V/20V tool until it clicks securely into place.
  2. Power On: Operate your tool as usual. The battery pack will provide power for its intended function.
  3. Check Battery Level: Press the button on the battery level indicator board to view the remaining charge. The LEDs will illuminate to show the approximate battery status.
  4. Charging: When the battery level is low, remove the pack from the tool and place it into a suitable lithium-ion battery charger designed for Dewalt 18V/20V batteries. Follow the charger's instructions for safe charging.
Side view of the assembled battery case, showing the 'LITHIUM ION' text and the overall form factor.
Figure 6: Assembled Battery Case, ready for use.

Maintenance

  • Regular Charging: Charge the battery pack regularly, especially after heavy use, to maintain optimal performance and extend battery life. Avoid deep discharge.
  • Proper Storage: Store the battery pack in a cool, dry place away from direct sunlight, extreme temperatures, and moisture. For long-term storage, charge the battery to approximately 50% capacity.
  • Inspection: Periodically inspect the battery case for any signs of damage, cracks, or loose connections. Do not use a damaged battery pack.
  • Cleaning: Keep the battery contacts clean and free from dirt or debris to ensure good electrical connection with tools and chargers.

Troubleshooting

  • Battery Not Powering Tool:
    • Ensure the battery pack is fully charged.
    • Verify the battery pack is correctly inserted into the tool.
    • Check all internal connections within the battery case for proper soldering and secure fit.
    • Confirm the BMS is functioning correctly (e.g., check for output voltage with a multimeter).
  • Battery Not Charging:
    • Ensure the charger is compatible and functioning.
    • Check the battery contacts for cleanliness and proper connection with the charger.
    • Verify the BMS is not in a protective state (e.g., due to over-discharge or over-current).
  • Battery Indicator Not Working:
    • Check the wiring connections to the battery level indicator board.
    • Ensure the indicator board itself is not damaged.

Specifications

Model Number dcb200
Brand Name dawupine
Type Battery Storage Box / Case with BMS PCBA
Battery Compatibility 10x 21700 Lithium-Ion Cells (not included)
Voltage (Output) 18V / 20V (compatible with Dewalt tools)
Nominal Capacity (with 8Ah cells) 8Ah
Package Yes (DIY kit components)
Approximate Dimensions (Assembled) 13.5cm (L) x 7.5cm (W) x 7cm (H)
Approximate Weight (Kit only) 0.222 kg
Origin Mainland China

User Tips

Based on feedback from other users, here are some helpful tips for assembling and using your battery case:

  • BMS Alternatives: If you have a dead Dewalt donor battery, you might consider using its original BMS for assembly, as some users have found it to fit well.
  • Soldering Space: The case design generally provides adequate space, which can be beneficial if your soldering adds a bit of girth to connections.
  • Sticker Trimming: The battery charge status sticker might be slightly oversized. Gently trim its edges before applying to prevent the case from twisting or the sticker from bubbling.
  • Component Reinforcement: For increased durability, consider gluing down the BMS board and its terminals to the base of the case.
  • Cable Upgrade: While the included cables are adequate, some users suggest replacing them with thicker gauge wires for improved performance, especially under high load.
  • Quality Cells: For best results and longevity, use high-quality 21700 cells from reputable manufacturers (e.g., genuine Samsung batteries).

Frequently Asked Questions (FAQ)

Q: Are the 21700 batteries included in this kit?
A: No, the 21700 lithium-ion battery cells are not included and must be purchased separately.
Q: Is professional experience required to assemble this kit?
A: Yes, professional knowledge and experience in electronics, battery assembly, and spot welding are essential for safe and correct assembly.
Q: What tools do I need for assembly?
A: You will need a spot welding machine, soldering iron, multimeter, and a suitable lithium-ion battery charger, in addition to basic hand tools.
Q: What if the PCB color or design is different from the pictures?
A: Variations in PCB color, design, and LED color may occur due to supply chain changes. These changes do not affect the functionality or performance of the product.
Q: Is there any after-sales support or warranty for this product?
A: This product is sold as a DIY semi-manufactured kit with no after-sales service, returns, or refunds. Please ensure you are comfortable with this policy before purchasing.

Warranty and Support

As explicitly stated in the product information, this is a DIY (semi-manufactured) kit and is sold without after-sales service. There are no returns or refunds once an order is placed. Please ensure you possess the necessary skills and tools for assembly before purchasing.

For additional technical details or diagrams, you may refer to the official user manual PDF, if available, at the following link: User manual (PDF).

© 2024 dawupine. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.