1. Introduction
Thank you for choosing the VaneAims FXB- series Voltage Protection Relay. This device is designed to provide comprehensive protection for your electrical appliances and circuits against overvoltage, undervoltage, and overcurrent conditions. It features an intelligent chip, automatic reset functionality, and a high-definition digital display for easy monitoring and configuration. This manual provides detailed instructions for the safe and effective use of your protection relay.
2. Safety Information
- Installation and maintenance should only be performed by qualified personnel.
- Ensure the main power supply is disconnected before installation or wiring to prevent electric shock.
- Verify that the voltage and current ratings of the device match your application requirements.
- Do not operate the device in wet or damp conditions.
- Ensure all connections are secure and properly insulated.
3. Package Contents
- 1 x VaneAims FXB- Series Voltage Protection Relay
- 1 x User Manual (this document)
4. Product Overview
The VaneAims FXB- series offers various versions to suit different monitoring needs:
- Regular Version (V A Display): Displays Voltage and Amperage.
- Upgraded Version (V A Display): Enhanced version displaying Voltage and Amperage.
- VA kWh Version (V A KWH 3IN1 Display): Displays Voltage, Amperage, and Kilowatt-hours.
- All-in-One Version (V A KWH W HZ 5IN1 Display): Displays Voltage, Amperage, Kilowatt-hours, Watts, and Hertz.
Key Features:
- Overvoltage Protection
- Undervoltage Protection
- Overcurrent Protection
- Intelligent Chip for reliable performance
- Automatic Reset after fault conditions clear
- High Definition Digital Display for clear readings

Figure 1: VaneAims Voltage Protection Relay Product Lineup with Key Features

Figure 2: Different versions of VaneAims Voltage Protection Relays
5. Setup
5.1. Installation
The VaneAims FXB- series protection relay is designed for 35mm DIN rail installation. It can be easily placed in standard household distribution boxes, being equivalent in size to a regular 2P circuit breaker.

Figure 3: DIN Rail Installation in a Household Distribution Box
5.2. Wiring Diagram
Connect the device according to the following wiring diagrams. Ensure proper polarity (Neutral 'N' and Live 'L') and secure connections.

Figure 4: Wiring Diagram and Front Panel for Regular/Upgraded Version

Figure 5: Wiring Diagram and Front Panel for kWh Version
6. Operating Instructions
6.1. Front Panel Overview
The front panel features a digital display, indicator lights, and control buttons:
- Display: Shows voltage, current, kWh, etc., depending on the version.
- Indicators:
>V: Overvoltage Indicator<V: Undervoltage Indicator>A: Overcurrent IndicatorPOWER: Normal Working Indicator (Green LED)- Buttons:
SET: Menu selection / Save settings▲(Up/Digit+): Increase value / Navigate up▼(Down/Digit-): Decrease value / Navigate down⏻(ON/OFF): Power on/off the output
6.2. Setting Instructions
To enter the setting mode, long press the SET button for 5 seconds. Use the ▲ and ▼ buttons to modify the parameter values. Press SET again to confirm and save the current setting and move to the next parameter. To quickly adjust values for longer periods, press and hold the ▲ or ▼ button.
6.3. Setup Menu Parameters
The available parameters vary slightly by version. Below are common parameters:
| Parameter | Description | Range (Typical) |
|---|---|---|
| P-1 | Power-on delay time | 1s - 999s |
| P-2 | Recovery delay | 1s - 999s |
| P-3 | Overvoltage Setting | 130V - 300V (or 240V - 300V) |
| P-4 | Overvoltage recovery value | 125V - 295V |
| P-5 | Undervoltage Setting | 80V - 210V (or 140V - 230V) |
| P-6 | Undervoltage recovery value | 85V - 215V (or 5s - 300s for kWh) |
| P-7 | Voltage trip delay / Starting delay time | 0.1s - 10s (or 5s - 300s for kWh) |
| P-8 | Overcurrent trip delay / Reset Power/Show kWh | 0.1s - 10s (or Reset/Show kWh for kWh) |
| P-9 | Overcurrent counter | 0 - 20 times |
| P-10 | Current adjustment | -9.5% ~ +9.5%A |
| P-11 | Preset Power Level | 0 - 999 |
| P-12 | Quick power down protection | ON/OFF |
| P-13 | Password setting / Frequency adjustment | 000 - 999 / -2.5% ~ +2.5%Hz |
Note: Under DC power, no current is displayed, only voltage is displayed. The initial password for P-13/P-19 is typically 112.
6.4. Functional Testing
The device performs automatic tests for overvoltage, undervoltage, and overcurrent conditions to ensure proper operation.
Video 1: Product demonstration including setting adjustments and overvoltage, undervoltage, and overcurrent tests.
7. Maintenance
- Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
- Ensure adequate ventilation around the device to prevent overheating.
- Regularly check wiring connections for tightness and signs of wear.
- Do not use abrasive cleaners or solvents.
8. Troubleshooting
- Device not powering on: Check the main power supply and ensure wiring is correct and secure.
- Device tripping unexpectedly: Verify that the overvoltage, undervoltage, and overcurrent settings are appropriate for your load. Check for actual fault conditions in your circuit.
- Display not working: Ensure the device is receiving power. If the issue persists, contact support.
- Cannot enter setting mode: Ensure you are long-pressing the
SETbutton for at least 5 seconds.
9. Specifications
| Feature | Specification |
|---|---|
| Supply Terminals | N, L |
| Rated Supply Voltage | AC 220V (DC 85-300V for VA-Regular/Upgraded) |
| Rated Frequency | 50/60Hz (40/50/60/70Hz for VA-Regular/Upgraded) |
| Overvoltage Setting Range (>V) | AC240-300V (AC130-300V for VA-Regular/Upgraded) |
| Undervoltage Setting Range (<V) | AC140-230V (AC80-210V for VA-Regular/Upgraded) |
| Voltage Hysteresis | 5V |
| Overvoltage Trip Delay | 0.5s |
| Voltage Accuracy | <1% |
| Max. Operating Phase Voltage | 350V |
| Max. Operating Current | 40A/63A/80A/100A (model dependent) |
| Altitude | ≤2000m |
| Delay Time | 5-300s |
| Permissible Relative Humidity | ≤50% at 40°C (without condensation) |
| Ambient Temperature | -25°C ~ +55°C |
| Size | 81*36*66mm |

Figure 6: Detailed Specifications Comparison for Different Versions
10. User Tips
- When setting parameters, remember that a long press on the up/down arrows allows for faster value changes.
- Always double-check your voltage and current settings to match the requirements of the connected appliances to avoid unnecessary tripping.
- For users requiring a manual in Spanish, please note that this document is provided in English. You may need to use translation tools or contact the seller for assistance.
11. Warranty and Support
VaneAims is committed to providing high-quality products. For any warranty claims, technical support, or inquiries, please contact your seller or the VaneAims customer service team with your purchase details. Please refer to your purchase agreement for specific warranty terms and conditions.